Mitutoyo 24” Digital Height Gage (SOLD AS-IS - NO WARRANTY)

Mitutoyo Bore Mic Set .800”-2.000” (SOLD AS-IS - NO WARRANTY)

SPI Bore Mic Set .500”-.800” and Mitutoyo Bore Mic Set .275”-.500” (SOLD AS-IS - NO WARRANTY)

Mitutoyo 2”-6” and .7”-1.4” Dial Bore Gages (SOLD AS-IS - NO WARRANTY)

Angle Plates (2) (SOLD AS-IS - NO WARRANTY)

OPEN LOT (SOLD AS-IS - NO WARRANTY) ...[more]

Mitutoyo Digital Deep Throat Snap Gage and Mitutoyo Digital Drop Indicator (SOLD AS-IS - NO WARRANTY ...[more]

Nikon SMZ-745 Stereo Microscope w/ Light Source (NO MOUNTING BRACKET) (SOLD AS-IS - NO WARRANTY) ...[more]

Mitutoyo 50” x 80” x 12” Granite Surface Plate (SOLD AS-IS - NO WARRANTY)

Starrett OD Mics 5"-6", 4"-5", 2"-3", 0-1" (SOLD AS-IS - NO WARRANTY)

Angle Fixture Plate w/ Magnetic Dial Indicator (SOLD AS-IS - NO WARRANTY) ...[more]

Import 1”-2” Thread Pitch Mic, SPI 0-6” Dial Depth Gage, and Mitutoyo Depth Mic (SOLD AS-IS - NO WARRANTY)

Fowler Digital Caliper Gage and Intertest Dial Caliper Gage (SOLD AS-IS - NO WARRANTY)

Dial Test and Dial Drop Indicators (SOLD AS-IS - NO WARRANTY)

Starrett 6” Master Level, Planer Gage and Lufkin Square Set (SOLD AS-IS - NO WARRANTY)

Thread Plug Gages (SOLD AS-IS - NO WARRANTY)

Deltronic Gage Pins (SOLD AS-IS - NO WARRANTY)

Starrett Gage Block Set (SOLD AS-IS - NO WARRANTY)

{ Group of lots: 17, 18 } MagnetiC Bases (SOLD AS-IS - NO WARRANTY)

{ Group of lots: 17, 18 } 1-2-3 Blocks and V-Blocks (SOLD AS-IS - NO WARRANTY)

Misc Inspection (SOLD AS-IS - NO WARRANTY)

Pin Gage Sets .061”-1.000” (SOLD AS-IS - NO WARRANTY)

Storage Cabinet, Shelf and File Cabinet (SOLD AS-IS - NO WARRANTY)

Lathem Time Clock (On Wall) (SOLD AS-IS - NO WARRANTY)

{ Group of lots: 23, 24 } Epson ET-4550 Printer (SOLD AS-IS - NO WARRANTY)

{ Group of lots: 23, 24 } Dell Optiflex 780 Computers (2) w/ Desk (SOLD AS-IS - NO WARRANTY)

OPEN LOT (SOLD AS-IS - NO WARRANTY)

Mori Seiki MS-850 17” x 36” Geared Head Gap Bed Lathe s/n 7171 w/ 32-1800 RPM, Inch Threading, Tailstock Steady and Follow Rests, 9” 3-Jaw Chuck, ...

KDK Tool Post and Tool Holders (SOLD AS-IS - NO WARRANTY)

Comet 3KVHD Vertical Mill s/n 930113 w/ Sony Magnascale LH11 Programmable DRO, 60-4200 Dial Change RPM, Chrome Box Ways, Power Feed, 10” x 50” Tab...

{ Group of lots: 29, 30 } 6" Angle-Lock Vise (SOLD AS-IS - NO WARRANTY)

{ Group of lots: 29, 30 } 6" Angle-Lock Vise (SOLD AS-IS - NO WARRANTY)

6” x 12” Surface Grinder e/ Magnalock Electromagnetic Chuck (SOLD AS-IS - NO WARRANTY)

Delta and Jet Pedestal Grinders (1-Stand) (SOLD AS-IS - NO WARRANTY)

Gast Vacuum Pump w/ Tank (SOLD AS-IS - NO WARRANTY)

Central Machinery Pedestal Grinder (SOLD AS-IS - NO WARRANTY)

R8 Collets (14) (SOLD AS-IS - NO WARRANTY)

{ Group of lots: 36, 37, 38 } 5C Spin Fixture (SOLD AS-IS - NO WARRANTY)

{ Group of lots: 36, 37, 38 } Mill Vise Stops (SOLD AS-IS - NO WARRANTY)

{ Group of lots: 36, 37, 38 } Tool Mist Sprau Units (2) (SOLD AS-IS - NO WARRANTY)

Equipto 10-Drawer Tooling Cabinet w/Misc (SOLD AS-IS - NO WARRANTY)

Equipto 10-Drawer Tooling Cabinet w/Endmills, Reamers and Misc (SOLD AS-IS - NO WARRANTY)

Equipto 10-Drawer Tooling Cabinet w/Taper Shank Drills, Deduced Shank Drills and Drills (Large Quantity) (SOLD AS-IS - NO WARRANTY)

Equipto 11-Drawer Tooling Cabinet w/ Hardware and Misc (SOLD AS-IS - NO WARRANTY)

Work Bench Risers (2) (SOLD AS-IS - NO WARRANTY)

Banding Cart w/ Tooling (SOLD AS-IS - NO WARRANTY)

Electrical Wire (SOLD AS-IS - NO WARRANTY)

2007 (Remanufactured) MAG Fadal VMC4020HT CNC Vertical Machining Center s/n R2007100131 w/ Fadal MultiProcessor CNC Controls, 21-Station ATC, CAT-...

2007 (Remanufactured) MAG Fadal VMC3016HT CNC Vertical Machining Center s/n R10079603168 w/ Fadal MultiProcessor CNC Controls, 21-Station ATC, CAT...

6" Angle-Lock Vise (SOLD AS-IS - NO WARRANTY)

Okuma LB15 II CNC Turning Center s/n 0711.2451 w/ Okuma OSP7000L Controls, 12-Station Turret, Hydraulic Tailstock, Parts Catcher, 10” 3-Jaw Power ...

1993 Fadal VMC4020 4-Axis CNC Vertical Machining Center s/n 9300087 w/ Fadal CNC88HS Controls, 21-Station ATC, CAT-40 Taper Spindle, 20” x 48” Tab...

Fadal 4th Axis 9” Rotary Head (SOLD AS-IS - NO WARRANTY)

6" Angle-Lock Vise (SOLD AS-IS - NO WARRANTY)

Dec/99 Mori Seiki SV-500/50 CNC Vertical Machining Center s/n 2176 w/ Mori Seiki MSC-501 Controls, 30-Station ATC, C AT-50 Taper Spindle, Thru Spi...

6" Angle-Lock Vise (SOLD AS-IS - NO WARRANTY)

Mori Seiki MH-63 2-Pallet 4-Axis CNC Horizontal Machining Center s/n 503 w/ Fanuc MF-M6 Controls, 60-Station ATC, CAT-50 Taper Spindle, 4th Axis T...

Mori Seiki MV-80A CNC Vertical Machining Center s/n 267 w/ Fanuc System 11M Controls, Hand Wheel, 40-Station ATC, CAT-50 Taper Spindle, 31 ½” x 74...

18" x 18" x 22" Tombstone w/ 22" x 22" Base (SOLD AS-IS - NO WARRANTY)

1992 Mighty Comet VMC1250G CNC Vertical Machining Center s/n 3551141 w/ Mitsubishi Meldas Controls, 20-Station ATC, CAT-50 Taper Spindle, Habor Oi...