0
FULL CATALOG COMING SOON REGISTER TODAY
1/2
Auctioneer has chosen not to publish the price of this lot
Inglewood, California
10.00%
18.00%
Description
CNC Mills : 1995 Fadal VMC 6030HT mdl. 907 CNC Vertical Machining Center s/n 9506979 w/ Fadal CNC32MP Controls, 21-Station ATC, CAT-40 Taper Spindle, Dual Floppy Discs, 4 th Axis Prewire (NO BOARD), Rigid Tapping, High Speed CPU, Graphics, 30” x 62 ½” Table, Coolant. 1997 Fadal VMC 4020 mdl. 906-1 CNC Vertical Machining Center s/n 9707398 w/ Fadal CNC88HS Controls, 21-Station ATC, CAT-40 Taper Spindle, 28” Extended “Z” Axis, 422k Memory Expansion, Rigid Tapping, High Speed CPU, Graphics, Hand Wheel, Servo Coolant, Tool Load Comp, 20” x 48” Table,Coolant. 1997 Fadal VMC 4020 mdl. 906-1 CNC Vertical Machining Center s/n 9707399 w/ Fadal CNC88HS Controls, 21-Station ATC, CAT-40 Taper Spindle, Hand Wheel, 422k Memory Expansion, Rigid Tapping, High Speed CPU, Graphics, Servo Coolant, Tool Load Comp, AC Axes Motors, 20” x 48” Table, Coolant. OOYA RE-2M CNC Vertical Machining Center s/n 835415 w/ GN-Fanuc 6 Series Controls, 32-Station ATC, CAT-50 Taper Spindle, Oilmatic Oil Cooler, 33” x 90 ½” Table, Coolant. Enshu VMC 650 CNC Vertical Machining Center s/n 141 w/ Fanuc System 11M Controls, 30-Station ATC, CAT-50 Taper Spindle, Hand Wheel, 26” x 63” Table, Coolant. Enshu VMC 650 CNC Vertical Machining Center s/n 132 w/ Fanuc System 11M Controls, 30-Station ATC, CAT-50 Taper Spindle, Hand Wheel, 26” x 63” Table, 30” x 63” Aluminum Tapped-Hole Top Fixture Plate, Coolant. Enshu VMC 610 CNC Vertical Machining Center s/n 126 w/ Fanuc System 6M Controls, 30-Station ATC, CAT-50 Taper Spindle, Hand Wheel, 24” x 55” Table, 26” x 57” TappedHole Top Fixture Plate, Coolant. CNC Lathe : Daewoo PUMA 10S CNC Turning Center s/n 830005 w/ Fanuc System 11T Controls, 12-Station Turret, Hydraulic Tailstock, 10” 3-Jaw Power Chuck, Jorgensen Chip Conveyor, Coolant. Lathes and Mill : Hardinge HLV-H Wide Bed Tool Room Lathe s/n HLV-H- 1526 w/ 125-3000 RPM, Inch Threading, Tailstock, Steady Rest, Power Feeds, KDK Tool Post, 5C Collet Closer. Hardinge HC Hand Chucker s/n HC-414A w/ Threading Attachment, 125-3000 RPM, 8-Station Turret, Collet Closer. Bridgeport Vertical Mill s/n 205142 w/ Bridgeport DRO, 2Hp Motor, 60-4200 Dial Change RPM, Chrome Ways, Power Feed, 9” x 42” Table. Support Machinery : F.A. Nugier mdl. H40-14 40-Ton Sliding Ram Hydraulic H-Frame Press s/n 2601017. Grob Type NS-24 24” Vertical Band Saw s/n 1564 w/ Blade Welder, 24” x 28” Table. Pacific Abrasive 1 ½” Belt Sander w/ Stand. Dayton Pedestal and Bench Grinders. Quincy mdl. QT50ANA32P 50Hp Rotary Vane Air Compressor s/n 93072H w/ Pre-cooler, 200 Gallon Tank, Great Lakes GRF-100 Refrigerated Air Dryer. Tooling : (2) 8” Angle-Lock Vises, (10) Kurt 6” Angle-Lock Vises, (6) Eron 4” Angle-Lock Vises, (100) CAT-50 and BT-50 Taper Tooling, (90) CAT-40 Taper Tooling, Huot Tooling Carts, Yuasa 10” Rotary Index Table, Troyke BH-12 12” Rotary Table, 8” Rotary Cross Slide, 8” 3-Jaw Indexing Chuck, Yuasa 5C Adjustable Angle Collet Closer, 5C Indexing Heads, 5C Collet Closers, 5C Spin Fixtures, 5C and R8 Collets, (7) Huot Drill Cabinets, Insert Milling and Turning Tooling, Drills, Taps, Reamers, Endmills. Inspection : J & L mdl. BC-14 14” Optical Comparator, Wilson mdl. 4JR Rockwell Hardness Tester s/n 5203, Brown & Sharpe 10” Height Master, Mitutoyo 40” Triple-Beam Dial Height Gage, Mitutoyo 24” and (2) 18” Dial Height Gages, Sunnen PG-800- S Precision Bore Gage w/ Sunnen PG-400- S Setting Fixture, Marvin 4” x 10” Dividing Bench Center, Mueller Dial Groove Gage, Mitutoyo 6”-12” OD Mic Set, Fowler and NSK OD Mic Sets, Brown & Sharpe 0-.5” Master Micrometer, 0-1” Indicating OD Mic, Mitutoyo SPI and Brown & Sharpe Bore Mics, Diatest, Mitutoyo and SPI Dial Bore Gages, Mitutoyo Blade, Disc, Point and Spline
Auction Details
Rigging/Removals
T&Cs & Important Info
Ask seller a question
CNC Mills : 1995 Fadal VMC 6030HT mdl. 907 CNC Vertical Machining Center s/n 9506979 w/ Fadal CNC32MP Controls, 21-Station ATC, CAT-40 Taper Spindle, Dual Floppy Discs, 4 th Axis Prewire (NO BOARD), Rigid Tapping, High Speed CPU, Graphics, 30” x 62 ½” Table, Coolant. 1997 Fadal VMC 4020 mdl. 906-1 CNC Vertical Machining Center s/n 9707398 w/ Fadal CNC88HS Controls, 21-Station ATC, CAT-40 Taper Spindle, 28” Extended “Z” Axis, 422k Memory Expansion, Rigid Tapping, High Speed CPU, Graphics, Hand Wheel, Servo Coolant, Tool Load Comp, 20” x 48” Table,Coolant. 1997 Fadal VMC 4020 mdl. 906-1 CNC Vertical Machining Center s/n 9707399 w/ Fadal CNC88HS Controls, 21-Station ATC, CAT-40 Taper Spindle, Hand Wheel, 422k Memory Expansion, Rigid Tapping, High Speed CPU, Graphics, Servo Coolant, Tool Load Comp, AC Axes Motors, 20” x 48” Table, Coolant. OOYA RE-2M CNC Vertical Machining Center s/n 835415 w/ GN-Fanuc 6 Series Controls, 32-Station ATC, CAT-50 Taper Spindle, Oilmatic Oil Cooler, 33” x 90 ½” Table, Coolant. Enshu VMC 650 CNC Vertical Machining Center s/n 141 w/ Fanuc System 11M Controls, 30-Station ATC, CAT-50 Taper Spindle, Hand Wheel, 26” x 63” Table, Coolant. Enshu VMC 650 CNC Vertical Machining Center s/n 132 w/ Fanuc System 11M Controls, 30-Station ATC, CAT-50 Taper Spindle, Hand Wheel, 26” x 63” Table, 30” x 63” Aluminum Tapped-Hole Top Fixture Plate, Coolant. Enshu VMC 610 CNC Vertical Machining Center s/n 126 w/ Fanuc System 6M Controls, 30-Station ATC, CAT-50 Taper Spindle, Hand Wheel, 24” x 55” Table, 26” x 57” TappedHole Top Fixture Plate, Coolant. CNC Lathe : Daewoo PUMA 10S CNC Turning Center s/n 830005 w/ Fanuc System 11T Controls, 12-Station Turret, Hydraulic Tailstock, 10” 3-Jaw Power Chuck, Jorgensen Chip Conveyor, Coolant. Lathes and Mill : Hardinge HLV-H Wide Bed Tool Room Lathe s/n HLV-H- 1526 w/ 125-3000 RPM, Inch Threading, Tailstock, Steady Rest, Power Feeds, KDK Tool Post, 5C Collet Closer. Hardinge HC Hand Chucker s/n HC-414A w/ Threading Attachment, 125-3000 RPM, 8-Station Turret, Collet Closer. Bridgeport Vertical Mill s/n 205142 w/ Bridgeport DRO, 2Hp Motor, 60-4200 Dial Change RPM, Chrome Ways, Power Feed, 9” x 42” Table. Support Machinery : F.A. Nugier mdl. H40-14 40-Ton Sliding Ram Hydraulic H-Frame Press s/n 2601017. Grob Type NS-24 24” Vertical Band Saw s/n 1564 w/ Blade Welder, 24” x 28” Table. Pacific Abrasive 1 ½” Belt Sander w/ Stand. Dayton Pedestal and Bench Grinders. Quincy mdl. QT50ANA32P 50Hp Rotary Vane Air Compressor s/n 93072H w/ Pre-cooler, 200 Gallon Tank, Great Lakes GRF-100 Refrigerated Air Dryer. Tooling : (2) 8” Angle-Lock Vises, (10) Kurt 6” Angle-Lock Vises, (6) Eron 4” Angle-Lock Vises, (100) CAT-50 and BT-50 Taper Tooling, (90) CAT-40 Taper Tooling, Huot Tooling Carts, Yuasa 10” Rotary Index Table, Troyke BH-12 12” Rotary Table, 8” Rotary Cross Slide, 8” 3-Jaw Indexing Chuck, Yuasa 5C Adjustable Angle Collet Closer, 5C Indexing Heads, 5C Collet Closers, 5C Spin Fixtures, 5C and R8 Collets, (7) Huot Drill Cabinets, Insert Milling and Turning Tooling, Drills, Taps, Reamers, Endmills. Inspection : J & L mdl. BC-14 14” Optical Comparator, Wilson mdl. 4JR Rockwell Hardness Tester s/n 5203, Brown & Sharpe 10” Height Master, Mitutoyo 40” Triple-Beam Dial Height Gage, Mitutoyo 24” and (2) 18” Dial Height Gages, Sunnen PG-800- S Precision Bore Gage w/ Sunnen PG-400- S Setting Fixture, Marvin 4” x 10” Dividing Bench Center, Mueller Dial Groove Gage, Mitutoyo 6”-12” OD Mic Set, Fowler and NSK OD Mic Sets, Brown & Sharpe 0-.5” Master Micrometer, 0-1” Indicating OD Mic, Mitutoyo SPI and Brown & Sharpe Bore Mics, Diatest, Mitutoyo and SPI Dial Bore Gages, Mitutoyo Blade, Disc, Point and Spline
PRECISION CNC MACHINING FACILITY
Sale Date(s)
Venue Address
374 E. Beach Ave.
Inglewood
California
90302
United States
For American Auctioneers Group delivery information please telephone (818) 763-2021.
Important Information
BidSpotter Customer Service Support Department
To reach a member of our qualified support staff regarding information or questions pertaining to the bidding process; please reach us by phone or email.
- Available Monday – Friday, 8:00am – 12:00am ET.
- Email: Support@bidspotter.com
- Office: 253-858-6777
- Frequently Asked Questions
Terms and Conditions
Terms and Conditions
BY REGISTERING TO BID ON LINE, ALL Registered BIDDERS ARE AGREEING TO ALL THE FOLLOWING TERMS AND CONDITIONS:
1) If registering online, all registered bidders must provide email address and fax number in order to process proper invoice.
2) Bidders by registering assume a legal responsibility to pay for lots sold to him with no exchanges, refunds, adjustments, or refusals.
PURCHASERS ARE TO SATISFY THEMSELVES AS TO CONDITIONS, QUALITY AND DESCRIPTION OF LOTS BEFORE BIDDING.
3) All lots are offered AS IS, WHERE IS, and become the property and responsibility of the bidder at time of the sale.
All lots to be sold as shown, with all faults, imperfections and errors of description. All SALES ARE FINAL.
4) No warranties or guarantees, expressed or implied are made by the auctioneer, concerning the accurace of description, genuineness, authenticity, or condition of lots.
5) A 18% BUYERS PREMIUM WILL BE PAID BY THE BUYER AS PART OF THE PURCHASE PRICE.
6) American Auctioneers Group, Inc. are not responsible for accidents, damage or loss of any kind to bidders, persons online or their property. We cannot be responsible and assume no liability for the packing, loading or securing of merchandise to your vehicle or truck.
All winning bidders are responsible to hire an insured rigger for the removal of items.
7) All purchases must be removed from the premises in the time allocated, as announced by the auctioneer.
8) A deposit of 25% of purchases will be required of every buyer. The deposit and final payment must be paid for by CASH, CASHIER'S CHECK OR WIRE TRANSFER BEFORE REMOVAL.
Deposits will not be returned if, items are not removed or paid for within the time announced or posted.
9) All buyers shall, at the time of purchase pay any state and local taxes, unless documentation is on file with AAG exempting from such taxes.
10) While quantities and description are believed to be correct, there are no guarantees and the auctioneers, owners, and advertising counsel will not be held responsible for advertising discrepancies, inaccuracies or failure of merchandise to correspond with any standard expected. All lots shall auctioned and bid upon lot number.
11) The auctioneer shall in no event be liable to the purchaser for non delivery of any lot for any reason except for the return to the purchaser of the deposit or money paid on such non delivered lots.
.
ANY ITEMS NOT REMOVED ON OR BEFORE THE REMOVAL DATE SHALL BE DEEMED ABANDONED AND WILL BE REMOVED AND SCRAPPED AT THE BUYERS EXPENSE
12) ALL SALES IN U.S. DOLLARS ONLY
13) If you do not have a credit card to register with bidspotter, then please call our office at 818-763-2021 and make arrangements to overnight checks.
14) PAYMENTS MUST BE MADE OR WIRE INITIATED BY CLOSE OF BUSINESS THE DAY AFTER THE SALE. Credit card authorization and company checks (not accompanied by bank letter) are for deposit only, and in the case of company checks (not accompanied by bank letters), will be returned to customer once full payment in cash, cashier's check or wire transfer is made.
INTERNET BUYERS PREMIUM IS 18%.
ALL SALES TAX WILL BE SUBJECT TO LOCAL SALES TAX.
AAG OFFICE NUMBER IS 818-763-2021
AAG FAX NUMBER IS 818-291-9495
Cash, Cashier check, or Wire transfer ONLY.
Credit Card is required for registrations but cannot be used for purchases.
