Refinar la búsqueda
Categoría
- Procesando (253)
- Other Industrial Supplies & Equipment (38)
- Handling & Packaging (32)
- Cookers & Cookware (26)
- Mixers & Blenders (25)
- Tanks & Vessels (24)
- Food Preparation (22)
- Compressors (19)
- Pipes & Fittings (16)
- Kitchen Equipment (11)
- Warehouse Equipment (7)
- Restaurant & Bar Equipment (6)
- Forklifts (4)
- Electrical Supplies (3)
- Other industries (3)
- Furniture (2)
- Processing Equipment (2)
- Complete Plants (1)
- Machines (1)
- Pharmaceutical Machinery (1)
- Recycling Equipment (1)
- Sheet Metal Processing (1)
- Warewashing (1)
- Listado
- Cuadrícula
-
499 item(s)/page
Este subastador ha elegido no publicar sus resultados. Póngase en contacto con él directamente para hacerle cualquier consulta.
Urschel model H dicer, currently set on 1"
x 1" dice, 7" diameter impeller infeed, 15-1/2" wide x 19-1/2" long infeed hopper, 51" infeed height, 3 HP electric motor belt drive, 1760 RPM, wi...
S/N X00615, maximum capacity of 300 pounds, maximum height of 15’, stainless steel and mild steel construction. (LOCATED AT: California Food Machi...
Cincinnati Fan model HP-10D22 air knife,
S/N 9813216, 55" of covered and 30" of open air exposure, 8" flanged air infeed, 25 HP electric motor drive, 3525 RPM, wired 230/460/3/60, stainle...
Tranter plate in frame heat exchanger,
83 plates, each plate is 16" wide x 52" tall, approximately 475 square feet heat transfer surface, 4" flanged fittings, stainless steel contact, m...
Sardy can level detectors, currently set
on 300 x 407 can size, 4" wide x 32" long magnet, 4" wide x 48" long belts, 1 HP electric motor gearhead drive, all stainless steel construction.(...
Stainless steel barrel dumper, capable of
handling up to 24" wide x 40" tall barrels, 1' infeed height, approximately 5' dumping height, hydraulically driven, all stainless steel construct...
Elmar model RPE 528I twenty eight station
piston filler, timing worm to infeed star to counter clockwise rotating bowl, 3-3/4" diameter pistons with 7" stroke, straight sided Waukesha valv...
connections, 5 each 1" diameter x 3-1/2" long magnets, all stainless steel construction(LOCATED AT: California Food Machinery -- 930 South Sacrame...
Stainless steel in-line magnet, 4" flanged
connections, 8" diameter top mounted flat magnet, all stainless steel construction.(LOCATED AT: California Food Machinery -- 930 South Sacramento ...
Stainless steel in-line magnet, 4" flanged
fittings, 5-1/2" wide x 11" long flat top mounted magnet, all stainless steel construction.(LOCATED AT: California Food Machinery -- 930 South Sac...
8" diameter top mounted flat magnet, all stainless steel construction. (LOCATED AT: California Food Machinery -- 930 South Sacramento Street; Lodi...
Cesco in-line magnet, 4" flanged infeed and
discharge fittings, 8" diameter top mounted flat magnet, all stainless steel construction.(LOCATED AT: California Food Machinery -- 930 South Sacr...
size number 6RIHD, 3" wide x 9-1/4" long top infeed, 3" threaded discharge, 7-1/2 HP electric motor drive, 1760 RPM, 208-230/460/3/60, all stainle...
S/N 115980, 1-1/2" Tri-Clover product infeed and discharge connections, 0.0015" clearance, stainless steel contact.(LOCATED AT: California Food Ma...
APV stainless steel positive displacement
pump, S/N H-1995, size number R1R, 1-1/2" Tri-Clover infeed and discharge fittings, stainless steel contact, requires rotors.(LOCATED AT: Californ...
CHL Systems stainless steel twin reel grader
and sliver remover, mod. RS-20-5ET-20, S/N 110548497-300, 34" wide x 11-1/2" long hopper infeed, divides product between drums, 2 each 20" diamete...
Stainless steel pict heater and Spirax Sarco
culinary steam filter, pict heater is 6" diameter x 55" long, 3" flanged steam infeed, 3" Tri-Clover infeed and discharge, all stainless steel con...
S/N 14825SS, 2-1/2" Tri-Clover infeed and discharge connections, stainless steel contact.(LOCATED AT: California Food Machinery -- 930 South Sacra...
S/N 93260, 2" I-line connections, 0.012" clearance, stainless steel contact.(LOCATED AT: California Food Machinery -- 930 South Sacramento Street;...
S/N 394615-05, 6" flanged fittings, 15 HP electric motor gearhead drive, 1765 RPM, wired 230/460/3/60, on stainless steel base.(LOCATED AT: Califo...
Stainless steel centrifugal pump, 3"
Tri-Clover infeed, 1-1/2" Tri-Clover discharge, electric motor drive.(LOCATED AT: California Food Machinery -- 930 South Sacramento Street; Lodi, ...
Solbern model LFF103 straight line liquid
filler, S/N 25052, currently set on 300 x 405 can size, 103 pockets, timing worm infeed, lug chain conveying, filler pockets spaced on 5-1/2" cent...
pump, S/N 1000002426877, 3" I-line fittings, 7-1/2 HP electric motor gearhead drive, 1785 RPM, wired 230/460/3/60, 0.006" clearance, on stainless ...
Cornell 8" dual lobe non-clog pump,
mod. 8NHTA-F18K, S/N 143232.17.13, 10" flanged infeed, 8" flanged discharge, mild steel construction, requires drive.(LOCATED AT: California Food ...
Lifto-West model LOM-4 forklift mounted 4
drum handler, fits all conventional rimmed steel, plastic and fiber drums, capable of handling up to 4 drums at a time, mild steel construction. (...
Flux Pump Corporation air powered pump,
mod. F520 s-50/45, 35 liter/minute maximum delivery rate, 42-1/2" shaft, 2" Tri-Clover discharge, all stainless steel contact. (LOCATED AT: Califo...
Waukesha model 130 positive displacement
pump, S/N 27117300, 3" I-line fittings, 7-1/2 HP electric motor gearhead drive, 1760 RPM, wired 230/460/3/60, 5.0:1 ratio gearbox, 0.0625" clearan...
Fitzmill model FAS012 hammermill, S/N 4066,
0.0625" perforated screen, currently installed with 24 hammers, 2 each 4" I-line hood infeeds for screws, 4" I-line hopper discharge, 60 HP electr...
S/N 2320, currently installed with 24 blades, 2" threaded infeed, 3" I-line discharge, 60 HP electric motor belt drive, 3530 RPM, wired 230/460/3/...
30” wide x 14’ long stainless steel cleated
belt elevator, 67” high infeed, 126” high discharge, set up for a slatted and flighted belt with 2” cleats, no drive or belting, all stainless ste...
distribution conveyor, rubber belt, 2 product discharges, hydraulically driven, all stainless steel construction. (LOCATED AT: California Food Mac...
Urschel model H-A dicer, S/N 595, 10"
diameter impeller infeed, currently set on 1/2" dice with Urschel model G 1/2" cross cut, 15-1/2" wide x 19-1/2" long infeed hopper, 40" infeed he...
Urschel model H dicer, S/N 595, 10"
diameter impeller infeed, 1/2" circular 15-1/2" wide x 19-1/2" long infeed hopper, 40" infeed height, 2 HP electric motor belt drive, 1715 RPM, wi...
Graham Corporation Heliflow heat exchanger,
mod. 8WXF-12, S/N 04-58751-2, 100 PSI at 350 degrees Fahrenheit maximum allowable working pressure and temperature for shell, 267 PSI at 400 degre...
Graham Corporation Heliflow heat exchanger,
mod. 8WXF-12, S/N 06-63880-3, 100 PSI at 350 degrees Fahrenheit maximum allowable working pressure and temperature for shell, 267 PSI at 400 degre...
Graham Corporation Heliflow heat exchanger,
mod. 8WXF-12, S/N 06-63880-4, 100 PSI at 350 degrees Fahrenheit maximum allowable working pressure and temperature for shell, 267 PSI at 400 degre...
Graham Corporation Heliflow heat exchanger,
mod. 9XF-14, S/N 05-63018-1, 65 PSI at 350 degrees Fahrenheit maximum allowable working pressure and temperature for shell, 200 PSI at 400 degrees...
Stainless steel pinch roll peel eliminator,
18-1/2” wide x 72” long peel eliminator bed, 18-1/2” wide x 4” waste discharge chute, 7/8” diameter pinch rollers, 4 sets of 11 each rubber phalan...
Goulds stainless steel centrifugal pump,
mod. JO 1.5X2-8, S/N 438AD85, 2" flanged product infeed, 1-1/2" flanged product discharge, rated for 70 GPM at 75' head pressure, 32.5 PSI, 5 HP e...
Waukesha model 015 positive displacement
pump, S/N 13935 SS, 1-1/2" Tri Clover fittings, 0.002" clearance, top, bottom and side mounts, stainless steel contact. (LOCATED AT: California Fo...
Sasib Manzini aseptic positive displacement
pump, model B-115:5220, S/N 38098, 1-1/2" threaded product infeed, 1-1/2" threaded product discharge, built in 2000, 3-1/2 HP electric motor gearh...
1" threaded steam inlet with 3/4" adaptor, 1-1/2" hot water infeed and discharge Tri Clover connections, 1/2" threaded cold water make up connecti...
osmosis filter system, S/N 2160027, 6" diameter x 50" long filter body, Meyers high pressure washdown pump, mod. CX10-15 SST, S/N 4884, 1-1/2" thr...
Protec Pro-8-1200-SP reverse osmosis filter
system, 8" diameter x 62" long filter body, 1200 PSI maximum operating pressure, temperature range between 20 degrees Fahrenheit to 120 degrees Fa...
built in 2002, 1-1/2" Tri-Clover infeed and discharge, 1/2" Tri-Clover connection on face, all stainless steel construction, requires drive. (LOCA...
S/N 9199405, 4" flanged infeed, 3" flanged discharge, mild steel construction, requires drive. (LOCATED AT: California Food Machinery -- 930 South...
C218, S/N 84-32991, 2" threaded infeed, 1-1/2" threaded discharge, 5 HP electric motor direct drive, 1710 RPM, wired 208-230/460/3/60, stainless s...
Chemineer VLA-20 mixer, S/N 1-89800-7, 24"
long shaft, 3 blade mixer head, 8" mounting flange, 2 HP electric motor direct drive, 1725 RPM, wired 208-230/460/3/60, stainless steel contact, m...
Lowara SH50-250 stainless steel centrifugal
pump, S/N 38097, 2-1/2" flanged infeed, 2" flanged discharge, 20 HP electric motor direct drive, 3525 RPM, wired 460/3/60, available at 50 Hz, sta...
mod. DCYB5FP-M1XE, date/S/N 06/12.373552, 150 PSI maximum pressure, maximum flow rated at 40.6 GPM, 3/4" threaded connections, 1/2 HP electric mot...
2 each Micro Motion flow meters with control
panel, 1 each Micro Motion model S150S151 flow meter, S/N 132651, sensor mod. DS150S151, temperature range between -240 to 204 degrees C, rated fo...
Stainless steel parts washer, 20" wide x 20"
long x 1-1/2" deep perforated wash tray, hinged lid, 60" infeed height, 1/2" threaded spray bar connection, 1" threaded drain, all stainless steel...
Micron Maquinaria model RVV 5-L V-blender,
S/N 300, built 7/30/2010, 5 liter capacity, 2 each 5" top infeed connections with clamp down lids, 1 each 3" bottom discharge with manually operat...
Manhattan heavy duty drill press,
model 951235, manufacture number 227337, speed adjustable from 150 RPM to 4200 RPM, 1 HP electric motor belt drive, 1720 RPM wired 110/220/1/60/50...
Cornell 8" dual lobe non-clog pump,
mod. 8NHT-F18K, S/N 145231 17.13, 10" flanged infeed, 8" flanged discharge, belt driven, mild steel construction, requires drive. (LOCATED AT: Cal...
Cornell 8" dual lobe non-clog pump,
mod. 8NHT-F18K, S/N 74159 14.88, 8" flanged fittings, mild steel construction, requires drive. (LOCATED AT: California Food Machinery -- 930 South...
Quincy model QSB 30 rotary screw air
compressor, mod. QSB30ANA32SS, S/N 94607J, 1-1/2" threaded compressed air discharge, control panel, 30 HP electric motor belt drive, 1740 RPM, wir...
78" wide x 32" long x 20" straight wall depth with 16" U-bottom, 31-1/2" diameter x 78" long blender, 6 each paddles with adjustable distance from...
125 gallon Imdec stainless steel insulated
tank, model A422, S/N 5335, 30" diameter x 38" straight wall depth with additional 13" cone bottom, 3" threaded center bottom discharge with 1-1/2...
80 gallon stainless steel tank, 37” diameter
x 17” deep, 3” Tri-Clover side bottom sloped discharge, 2” Tri-Clover bottom side fitting, 4” Tri-Clover side fitting with butterfly valve, 3” top...
Loading...-
499 item(s)/page