10” x 10”, flanged fittings, size 250-250, 40hp 1175 rpm direct drive, 230/460/3/60, S/N N24088, fair-good condition – as is. (LOCATED AT: Califor...

10” x 10”, flanged fittings, size 250-250, 40hp 1175 rpm direct drive, 230/460/3/60, S/N N24087, fair-good condition – as is. (LOCATED AT: Califor...

1” I-Line out, 5hp variable speed drive, 240/480/3/60, type 4150, S/N 190541, stainless steel contact, fair condition – as is. (LOCATED AT: Califo...

pump, 3” x 1.5”, alloy contact parts, 60hp 860 rpm direct drive, 230/3/60, S/N 148482, fair condition – as is. (LOCATED AT: California Food Machin...

pump, 3” x 1.5”, alloy contact parts, 60hp 860 rpm direct drive, 230/3/60, S/N 148480, fair condition – as is. (LOCATED AT: California Food Machin...

hot hold loop with (8) 48” diameter wraps, 4” threaded inlet (lower) with (2) 2” and (1) 3” threaded discharge ports, no discharge fitting, stainl...

(7) 10’ straight sections, 3” inlet and discharge ports with both threaded and Tri-Clover fittings, stainless steel construction, good condition –...

dried macaroni and a cheese packet, with a carton feeder/former, a 10 station rotary volumetric pocket filler for the macaroni and a 10 station ro...

form-fill-seal machine for thermo-formed trays, rated to 12 strokes per minute, bottom pouch forming mold with part number 20/1/32/50/1 and the to...

4” belt, 20” infeed elevation, 80” discharge elevation, vertical style, no drive, fair condition – as is. (LOCATED AT: California Food Machinery -...

linking line, fills and links cellulose and collagen casing, diameter range 14.5mm to 34mm, links up to 6,000# per hour, 17? slug length, touch sc...

flighted elevator, blue sanitary belting with 1” flights on 12” centers, 16” x 24” hopper, 30” infeed, 7’ high discharge, with an additional 16” l...

type FC2H-SSE-3FAA, 12” x 24” hopper infeed to a 9” x 13” flanged infeed, 4” Tri-Clamp discharge, 10hp 1765 rpm gearhead drive with a 12.3:1 gearb...

with (2) 240 kg capacity removable bowls measuring 38” diameter x 20” deep, two speed settings, hydraulic dough bowl locking mechanism, hydraulic ...

long x 17” deep, with casters, parts in buggie not included, good condition – as is. (LOCATED AT: California Food Machinery -- 930 South Sacrament...

3/16" circular cut spindle and an opposing feed drum, adjustable gap, with controls, originally set up with an Urschel feed hopper to a Syntron st...

vibratory shaker, with (2) 5" wide x 3" deep lanes with rigidized surfaces, no drive or eccentric, fair condition - as is. (LOCATED AT: California...

vibratory shaker, with (2) 5" wide x 3" deep lanes with rigidized surfaces, no drive or eccentric, fair condition - as is (LOCATED AT: California ...

and a 10hp 3520rpm drive, with a stainless steel and plastic enclosure, and gauges, with some extra parts, good condition - as is. (LOCATED AT: Ca...

perforations on bottom, 28" diameter x 20" deep, 3'16" round holes, four legs, good condition - as is. (LOCATED AT: California Food Machinery -- ...

steel tube-inshell heat exchanger, 2" Tri-Clamp fittings, with approximately (40) 1/2" diameter tubes, approximately 13 square feet of surface are...

hectoliter (300 liters) capacity horizontal wine press, 22" diameter x 58" long slotted tank with access port for loading and unloading, electric ...

single deck sifter, all stainless steel contact and frame construction, 2.5hp 230/460/3/60 drive, with a fine wire mesh screen, with a fine wire m...

coating drum, with a 1' section for fines removal, 3/16" round holes, unit mounted at an approximate 5 degree downward slope, with (4) 1" tall fli...

former, rated to 20 cases per minute, with bottom head, with powered fiber hopper/magazine, 1/2hp chain lug drive, 110/1/60, will form cases from ...

former, rated to 20 cases per minute, with bottom head, with powered fiber hopper/magazine, 1/2hp chain lug drive, 110/1/60, will form cases from ...

taper, top only and capable of top and bottom with the addition of a bottom tape head, with pneumatic back flap kickers and side flap folders, pow...

taper, top only and capable of top and bottom with the addition of a bottom tape head, with pneumatic back flap kickers and side flap folders, pow...

10” wide flat top belts which extend from 7’ long to 12’ long, 64” infeed, 54” discharge, with a stainless steel .75hp 1750rpm 40:1 gearhead drive...

12” wide flat top belts which extend from 7’ long to 12’ long, 64” infeed, 54” discharge, with a stainless steel .75hp 1750rpm 40:1 gearhead drive...

piston operates rotary valve while 5" diameter x 6" stoke piston pushes product out 2-1/2" threaded discharge fitting, stainless steel constructio...

screw on capper, S/N 171, set up for 43mm plastic caps, left-to-right feed, 4-1/2" table top conveyor, timing worm to star infeed, star discharge,...

sanitary centrifugal pump, S/N 97-43942, 3" flanged infeed, 2" flanged discharge, 5 HP electric motor direct drive, 1750 RPM, wired 230/460/3/60, ...

sanitary centrifugal pump, S/N 112499-01, 5 HP electric motor direct drive, 1750 RPM, wired 460/3/60, stainless steel contact, on a stainless stee...

centrifugal pump, S/N 85-41708, 2" flanged product infeed, 1-1/2" flanged product discharge, stainless steel contact, mild steel base, requires mo...

S/N 4086, 18" wide x 30" long x 27" deep U-shaped product infeed hopper, 58 gallon capacity, 1/2 HP mixer in hopper, electric motor gearhead drive...

access removable clean out, 3" flange connections, check valve, all stainless steel construction, requires cover clamp.(LOCATED AT: California Foo...

warm up inline syrup prior to starting a pumping operation, 8" Tri-Clover top, 4" inline tee, chamber is 8" diameter x 37" deep, requires lid and ...

S/N A-1066, National Board number 1148, 100 PSI, 4 blade non sweep agitator (can be set up with a single motion swept surface agitation) powered b...

model 15C, S/N 1534, hydraulic lifting cylinder, can handle up to 23-3/4" diameter, hydraulic power packs available, all stainless steel construct...

diameter x 9' straight wall, 20" wide x 20" long top access hatch, twin impellers, 2" Tri-Clover top infeed, 3" Cherry Burrell side infeed, 8" fla...

of lift, 500 lbs capacity, fork lift style hydraulic cylinder, 23" wide x 24" long x 48" tall lifting area, 1-1/2 HP hydraulic power pack, 8 gallo...

impeller infeed, currently set on 3/8" dice, all stainless steel construction, requires drive, cross cut blade, infeed hopper, top cover guard, ch...

(LOCATED AT: California Food Machinery -- 930 South Sacramento Street; Lodi, CA 95240; 209-334-6638. ALL LOTS LOCATED AT THE LODI LOCATION WILL H...

mod. 433146-1, S/N 04-120990, ridgidized stainless steel shaker pan, 6" tall sides, divides into 2 lanes for last 5 feet, with drive, all stainles...

S/N 178835-96, 2-1/2" I-line product infeed and discharge, 0.012" gap, stainless steel contact.(LOCATED AT: California Food Machinery -- 930 South...

36" product infeed and discharge height, 2 each 4-1/2" wide x 30" long x 3" deep side mounted reject chutes, 2" threaded rinse medium infeed conne...

pump, S/N 9771052, 3" Tri-Clover infeed and discharge, 3 HP direct drive electric motor, 1710 RPM, wired 575/3/60, catalog number 131260.00, model...

pump, S/N 97711051, 3" Tri-Clover infeed and discharge, 7-1/2 HP electric Varidrive motor, 1730 RPM, wired 575/3/60, stainless steel contact and b...

Tri-Cover infeed, 1-1/2" Tri-Clover discharge, 10 HP electric motor direct drive, 1760 RPM, wired 575/3/60, stainless steel contact.(LOCATED AT: C...

impeller infeed, currently set on 1/2" x 1/2" dice, 3 HP electric motor belt drive, 1755 RPM, wired 230/460/3/60, all stainless steel construction...

4" Tri-Clover infeed, 3" Tri-Clover discharge, 200 HP electric motor direct drive, 3570 RPM, wired 460/3/60, 220 amp, stainless steel contact.(LOC...

S/N 694199, bowl S/N 1699055, 2" threaded pipe infeed, 4" flanged product disharge, 15" wide x 5" long trash chute, rebuilt in 2010 by Separators ...

conveyor, Meat Packers Equipment Company model 211, S/N 853, 26" wide x 13" long discharge hopper with bombay gate, 1 HP electric motor gearhead d...

conveyor, 34-1/2" wide x 12" long tapered side discharge chutes, 1 pneumatically operated diversion gate, 3 HP electric drive, all stainless steel...

diameter impeller infeed, currently set on 3/4" x 3/4" dice, 15-1/2" wide x 19-1/2" long infeed hopper, 40" infeed height, 2 HP electric motor bel...

impeller infeed, 2 HP electric motor belt drive, 1725 RPM, wired 208-230/460/3/60, stainless steel construction, requires control panel, infeed ho...

S/N 2675, housing for 2" diameter valves, 32" wide x 18" long x 27" deep tapered hopper, pneumatically operated valve, electric motor drive, all s...

S/N SP-51-56-3-003087, 1-1/2" Tri-Clover infeed, 1" Tri-Clover discharge, 2 HP electric motor direct drive, 3450 RPM, wired 575/3/60, stainless st...

impeller infeed, currently set on 1/2" x 1/2" dice, 2 HP electric motor belt drive, 1725 RPM, wired 208-230/460/3/60, all stainless steel construc...