Refinar la búsqueda
Categoría
- Procesando (253)
- Other Industrial Supplies & Equipment (38)
- Handling & Packaging (32)
- Cookers & Cookware (26)
- Mixers & Blenders (25)
- Tanks & Vessels (24)
- Food Preparation (22)
- Compressors (19)
- Pipes & Fittings (16)
- Kitchen Equipment (11)
- Warehouse Equipment (7)
- Restaurant & Bar Equipment (6)
- Forklifts (4)
- Electrical Supplies (3)
- Other industries (3)
- Furniture (2)
- Processing Equipment (2)
- Complete Plants (1)
- Machines (1)
- Pharmaceutical Machinery (1)
- Recycling Equipment (1)
- Sheet Metal Processing (1)
- Warewashing (1)
- Listado
- Cuadrícula
-
499 item(s)/page
Este subastador ha elegido no publicar sus resultados. Póngase en contacto con él directamente para hacerle cualquier consulta.
Continental progressive cavity pump,
2” X 1.5”, Tri-Clover fittings, stainless steel contact, 1.5hp 1725 rpm direct coupled drive, 115/208/1/60, model CPML56-SSQMT, S/N CP-3760. (LOCA...
Cozzini stainless steel surge hopper /
horizontal screw loader, 48” wide x 54” long x 42” deep hopper, angled sides, u-bottom, approximately 40 cubic feet, with a single paddle mixing s...
Moyno type SSO progressive cavity pump,
stainless steel contact, frame 1FF8, form 7S, S/N A8508-18" x 12" feed, 4" threaded discharge, no drive, with (2) spare stators. (LOCATED AT: Cali...
Olney 40” wide riffle pan destoner,
model 1991, S/N 240-SC, 40” wide x 48” long destoning section with (10) riffles, 6’5” overall length, with over flow infeed, mechanical rock clean...
can closing machine, set up for 603x700 cans, automatic cover feed, foot actuated, with drive, S/N 18632, as is. (LOCATED AT: California Food Mach...
screw air compressor, 30hp, 150psi, 112cfm, 5316 hours, new in 2004, 230/3/60, S/N PX3847U04246, 230/3/60, good condition, as is. (LOCATED AT: Cal...
Ingersoll-Rand model TS2A air dryer, air
cooled, 230/3/60, 175psi max, 2008, S/N DN00001932-090308, good condition, as is. (LOCATED AT: California Food Machinery -- 930 South Sacramento S...
stuffer / filler, all stainless steel construction, with conical vacuum chamber, controls, S/N 362, with parts, good condition, as is. (LOCATED AT...
stainless steel construction, requires connection to a stuffing pump, S/N 43, 120/1/60, 1997, fair condition, as is. (LOCATED AT: California Food ...
Handtmann model PX94-RC whole muscle
portioner, stainless steel construction, requires connection to a stuffing pump, S/N 1187, 120/1/60, fair condition, as is. (LOCATED AT: Californi...
Technopack “Tipper Tie”, model TCAF,
stainless steel construction, 38mm (1.5”) sausage feed, single magazine feed for 5/8” clips, with controls, good condition, as is. (LOCATED AT: Ca...
Stainless steel pack-off table with a 45
degree drop chute, 4’ x 4’ chute tapers down to a 30” x 24” table with 5.5” tall sides, all stainless steel, good condition, as is. (LOCATED AT: C...
Ingersoll-Rand model SSR-EPE-25V rotary
screw air compressor, 25hp, 128psi, 100cfm, 230/3/60, S/N J9110U93334, good condition, as is. (LOCATED AT: California Food Machinery -- 930 South ...
17.5” wide x 12’ long inclined elevator,
7’ discharge, 30 degree rise, sanitary belting, Interroll drum pulley drive motor, 230/3/60, good condition, as is. (LOCATED AT: California Food M...
form-fill-seal machine for thermo-formed trays, rated to 12 strokes per minute, thermo forms 5” x 4.75” pouches, 64” between tools, film rails for...
14 cubic foot screw feeder with ribbon
blender hopper, 18" wide x 37" long x 36" deep tapered hopper, with a hopper extension allowing for up to 50 cubic feet of material being in the u...
dryer, 134A refrigerant, 232psi max, 100cfm max, 0.75” fittings, 115/1/60, S/N 3068050002, good condition, as is. (LOCATED AT: California Food Mac...
exchanger, (4) 6” x 72” barrels each with 9 square feet of surface area, chrome plated barrel contact, mutator shafts with clip on stainless steel...
heat exchanger, 316SS, (100) 12” wide x 36” long plates, 300 square feet of surface area, 4” flanged medium ports, 3” flanged product ports, rated...
assembly with topper and timing worm feed, set for 300x407 cans, with a 3-head rotary topper, 42” long timing worm, with a full Lexan enclosure, w...
assembly with topper and timing worm feed, set for 300x407 cans, with a 3-head rotary topper, 42” long timing worm, with a full Lexan enclosure, m...
S/N WC142, 2” ports, 115/1/60, R22 refrigerant, with air receiver, fair-good condition, as is. (LOCATED AT: California Food Machinery -- 930 South...
belt drive, tape heads not installed, but available from our stock, 110/1/60, S/N 10850, 1997, fair -good condition, as is. (LOCATED AT: Californi...
taper, side belt drive, 110/1/60, with an Anser inkjet coder and a Red Lion digital display unit, S/N 1997-10-15, good condition, as is. (LOCATED ...
80 gallon rectangular buggie, stainless
steel, 24” wide x 52” long x 17” deep, with a 1” drain, on casters, fair condition. (LOCATED AT: California Food Machinery -- 930 South Sacramento...
spin turntable, good condition, as is. (LOCATED AT: California Food Machinery -- 930 South Sacramento Street; Lodi, CA 95240; 209-334-6638. ALL LO...
pressure water pump, 15gpm, 1.5” ports, 5hp motor, dented fan cowling, fair-good condition, as is. (LOCATED AT: California Food Machinery -- 930 S...
pressure water pump, 1.5” ports, no motor installed, never used - like new condition, as is. (LOCATED AT: California Food Machinery -- 930 South S...
Tri-Clover 2” x 1.5” stainless steel
centrifugal pump, 2hp stainless steel motor, 3450rpm, 230/3/60, stainless steel base, good condition, as is. (LOCATED AT: California Food Machiner...
frame heat exchanger with (30) 8” wide x 20” long plates, 33 square feet, with a 3hp 3450rpm centrifugal pump, with valves and piping, skid mounte...
exchanger, all stainless steel contact and frame construction, with (6) 1.5” diameter x 19’-6” long spiral walled tubes with expansion joints and ...
Tri-Clover 2” x 1.5” stainless steel
centrifugal pump, 208-220/440/3/601755rpm drive, stainless steel contact and base, mild steel motor, good condition, as is. (LOCATED AT: Californi...
inverter kit for 24 ounce squeezable ketchup bottles, set up with two 32” long powered body grip feed belts and a right hand infeed inverter and a...
inverter kit for 24 ounce glass jars and 15 ounce glass sauce jars, set up with two 32” long powered body grip feed belts and two sets of right ha...
15” wide x 28” long, with two open shelves with 12” spacing, on casters, as is. (LOCATED AT: California Food Machinery -- 930 South Sacramento Str...
15” wide x 28” long, with two open shelves with 12” spacing, on casters, as is. (LOCATED AT: California Food Machinery -- 930 South Sacramento Str...
x 40” long, with five solid shelves with 10” spacings, on casters, as is. (LOCATED AT: California Food Machinery -- 930 South Sacramento Street; L...
x 40” long, with seven solid shelves with 10” spacings, the top shelf measures on casters, as is. (LOCATED AT: California Food Machinery -- 930 So...
Ryson spiral elevator for cases or bags,
12” wide plastic slatted belting, with 4 turns, 3’ high infeed, 11’ high discharge, 16” spacing between turns, 2hp gearhead motor, 230/460/3/60, a...
Legion 40 gallon steam jacketed kettle,
model LT-40, 40psi, S/N 840697, no NB#, 1.5” horizontal bottom discharge with butterfly valve, Tri-Clover fittings, as is. (LOCATED AT: California...
long x 24” tall enclosed cabinet with catchpan, no conveyor, with internal spray header and a 2.5hp stainless steel centrifugal pump with inline f...
Ingersoll-Rand model SSR-EP25SE air
compressor, 25hp screw compressor, 95CFM, 125PSI, 230/460/3/60, S/N KE2466U95317, with controls, as is. (LOCATED AT: California Food Machinery -- ...
Ingersoll-Rand model SSR—UP6-40-125HA
compressor, 40hp screw compressor, 185CFM, 125PSI, 460/3/60, S/N CBV134204, with controls, as is. (LOCATED AT: California Food Machinery -- 930 So...
Ingersoll-Rand model SSR-EP50SE air
compressor, 50hp screw compressor, 215CFM, 125PSI, 230/460/3/60, S/N G10009U02227, with controls, as is. (LOCATED AT: California Food Machinery --...
dryer, 212CFM, R13a refrigerant, 230/1/60, as is. (LOCATED AT: California Food Machinery -- 930 South Sacramento Street; Lodi, CA 95240; 209-334-6...
2" wide x 25" long container gripper belts, 8" maximum container width, 6 each quills, 7" diameter maximum cap size, all settings manually adjuste...
28” wide x 31” long, with five open shelves with 10” spacing, on casters, as is. (LOCATED AT: California Food Machinery -- 930 South Sacramento St...
28” wide x 31” long, with five open shelves with 10” spacing, on casters, as is. (LOCATED AT: California Food Machinery -- 930 South Sacramento St...
28” wide x 31” long, with five open shelves with 10” spacing, on casters, as is. (LOCATED AT: California Food Machinery -- 930 South Sacramento St...
28” wide x 31” long, with five open shelves with 10” spacing, on casters, as is. (LOCATED AT: California Food Machinery -- 930 South Sacramento St...
28” wide x 31” long, with five open shelves with 10” spacing, on casters, as is. (LOCATED AT: California Food Machinery -- 930 South Sacramento St...
28” wide x 31” long, with five open shelves with 10” spacing, on casters, as is. (LOCATED AT: California Food Machinery -- 930 South Sacramento St...
28” wide x 31” long, with five open shelves with 10” spacing, on casters, as is. (LOCATED AT: California Food Machinery -- 930 South Sacramento St...
short shaft 3 stage setup , 3” Tri-Clover ports, 40 HP 3650 RPM 230/460/3/60 direct drive, stainless steel base, good condition, as is. (LOCATED A...
mounted, 3” diameter x 9’ long shaft with an 8” diameter x 9” tall high shear mixing head, driven by a 25hp 230/460/3/60 1160rpm direct drive with...
model D35XKSTHFECF, 2.5” NPT x 1.25” NPT, rated to 36.5 gallons per minute and 1500 psi max, 20hp 230/460/3/60 1765rpm belt drive, stainless steel...
set up with (30) 7/8” diameter x 10 long tubes with approximately 70 square feet of surface area, with a 1.5” steam inlet and a 1” condensate disc...
50 gallon stainless steel jacketed tank,
electrically heated with a water jacket and an internal heating element, 39” diameter x 10” tall, open top with removable lids, with a top mounted...
heated belt dryer / dehydrator, 18” wide c 12.5’ long wire mesh belt conveyor with approximately 10’ of heating, 2-zone set up (5’ long per zone),...
200psi, as is - good condition. (LOCATED AT: California Food Machinery -- 930 South Sacramento Street; Lodi, CA 95240; 209-334-6638. ALL LOTS LOC...
Loading...-
499 item(s)/page