Includes case, charger, and (2) 2.5 AH 20V batteries
(1st of an entirety) SN: 2110-1699-98, 4' x 4' x 78" cab with AC unit and all controls, includes hydraulic pack under cab, 3" x 24" bull wheels, 4...
(Part of an entirety) 200 hp electric motor, has cooling unit, Eurodrive gearbox, spool of 3/4" braided cable, includes idler pullies mounted on t...
(Part of an entirety) (2) Allen Bradly ACS 600 Inverted modules
(Part of an entirety) 27" x 60" x 16" tank, includes all hydraulic lines and hoses to equipment
(Part of an entirety) Electric drive, 10 gallon tank, includes all hydraulic lines and hoses to equipment
W0-653, BM-2776, 10.5" x 7' wheels, 1 1/4" mead on top wheel, air strain, lineal positioning cylinder, does not include electric drive, 30" x 6' s...
24" x 60" x 30" tank, includes all hydraulic lines and hoses to equipment
Approx. 50 hp motor but tag is missing, 24" x 60" x 24" tank, includes spill tray, includes all hydraulic lines and hoses to equipment
(Part of an entirety) SN: PGH004235, 480V, up to 300 hp, 120V control
(Part of an entirety) Electric drive, H78A rooftop chain, 12' x 15', includes steel plate and rub rail on side, air cylinder on cant stop
(Part of an entirety) 5'6" x 24'6", 10.5" x 42" rolls, 32" spacing, 2 way pop-up chain turners, hydraulic drive, hydraulic cylinders on pop-up, in...
(Part of an entirety) SN: 21852JF, 150 gallon tank, 42" x 60" x 25" tank, includes all hydraulic lines and hoses to equipment
(Part of an entirety) 3' x 5' x 2' tank, includes all hydraulic lines and hoses to equipment
(Part of an entirety) 26" x 45" x 23" tank, includes all hydraulic lines and hoses to equipment
(Part of an entirety) Control panel for saw setworks
(Part of an entirety) 18" x 32" x 16" tank, includes all hydraulic hoses and lines to equipment
SN: HE291E, made in 1996, (2) 16" blades-both moveable, hydraulic controls, 4" x 30" capacity, laser lights, 50 hp electric drive, 12" x 24" x 18"...
(Part of an entirety) 18" x 36" x 18" tank, includes all hydraulic lines and hoses to equipment
(Part of an entirety) 14" x 24" x 12" tank, includes all hydraulic lines and hoses to equipment
Brand new, feed side bearings, SKF brand, still in box
80 gallon vertical tank, 7 1/2 hp electric motor, includes disconnect boxes
Plastic tote with metal cage. May still contain a small amount of adhesive.
Plastic tote with metal cage. May still contain a small amount of adhesive.
Plastic tote with metal cage. May still contain a small amount of adhesive.
Plastic tote with metal cage. May still contain a small amount of adhesive.
(2) 2000 amp switches, 480V, includes conduit from gensets to switchboard to motor control panels
SN: 1004, made in 2003, 460V, 125 psig, 100 hp electric motor, 425 cfm, includes air line from compressor to tank, includes disconnect box
480V, 3 ph, 600 amps/section, 13 sections, 2' x 23' x 93" tall overall, includes conduit from control center to 1st junction box above control cen...
480V, 3 ph, 600 amp, single section
Shovels, broom, cant hook, sledge hammer, splitting maul, located by green chain
6' x 20' x 78" deep, includes hydraulic pack for power, includes electrical control panel
Electric drive, no saws installed, air cylinders on head, 5' x 28' x 8'6" tall overall, uninstalled, feed deck included but not attached, includes...
SN: 3855-G, 250 hp, 460V, 1180 rpm electric motor, 200 kw unit, 200 amps, empty wire spool for up to 1' cable, includes 24" blower with electric d...
SN: 9201116, 12000 lbs capacity, powered by 2 hp, 220/440V hydraulic pack, 7" x 12" x 21" hydraulic pack, uninstalled, includes disconnect box
SN: 9201117, 12000 lbs capacity, powered by 2 hp, 220/440V hydraulic pack, 7" x 12" x 21" hydraulic pack, uninstalled, includes disconnect box
SN: VCE0L70GE0S614348. Meter reads: 11,195 hours. Engine: Volvo D6H (SN: 11586949)-154 hp. Fuel type: Diesel. ROPS: Enclosed. 3rd Valve: Yes. Cent...
7 1/2 hp, 460V, 3 ph, 182/4T frame, 1750 rpm
7 1/2 hp, 213/5T frame, 3 ph, 1765 rpm, 460V
250 hp, 1775 rpm, 445T frame, 460V, 13 1/2" 8 groove pulley, mounted on steel frame was used to run old circle mill, was in good working condition...
125 hp, 1760 rpm, 405T frame, 460V, rewound
50 hp, 1770 rpm, 326T frame, 460V, rewound
SN: 89A028, 10 gpm, 460V, 2000 max psi, 26" x 48" x 12" tank
(1) 7 1/2 hp, 460V, 1165 rpm, (1) 10 hp, 460V, 1730 rpm with gearbox
Used to make bushings for lot #135, air powered press, 110V surfacer, includes melting ladle