Affinez votre recherche
Filtered by:
- Catégorie
- Liste
- Grille
-
63 item(s)/page
Ce commissaire-priseur a choisi de ne pas publier ses résultats. Veuillez le contacter directement pour toute demande de renseignements.
20MM CITIZEN L20VIII CNC SWISS TYPE SLIDING HEADSTOCK TURNING CENTER LATHE, S/N Q13812, NEW 2004
Max. Machining Diameter 3/4", Max. Machining Length per one chuck 7/9", Max. Drilling diameter up to .394", Spindle speed 200-10,000 RPM, Back wor...
Specifications: 14’ x 10’ Cutting Capacity (XY), 12” Motorized Z-axis Travel, Flow Master PC Controller and Software, Versio...
20MM CITIZEN L20VII CNC SWISS TYPE SLIDING HEADSTOCK TURNING CENTER LATHE, S/N Q13459, NEW 2003
Max. Machining Diameter 3/4"/20mm, Max. Machining Length per one chuck 7.9"/200mm, Max. Drilling diameter up to .394"/10mm, Spindle speed 200-10,0...
20MM CITIZEN L20VII CNC SWISS TYPE SLIDING HEADSTOCK TURNING CENTER LATHE, S/N Q10949, NEW 2000
Max. Machining Diameter 3/4"/20mm, Max. Machining Length per one chuck, 7.9", 200mm, Max. Drilling diameter up to .394"/10mm, Spindle speed 200-10...
16MM CITIZEN K16 TYPE VII CNC SWISS TYPE SLIDING HEADSTOCK AUTOMATIC LATHE, S/N K00171, New 20006
Max. machining diameter 16mm, Max. machining length 200mm, Output 3.7 kW, Spindle speed 15,000 RPM, Spindle Indexing C-Axis 0.001 deg, Sub-Sp...
Max.swing/Over Carriage 21.25"/20.47", Max. Cutting Diameter 21.25", Travels X-Axis 20.87", Travel Y-Axis 5.5", Travel Z-Axis 42", B-Axis Head Con...
X-Axis Travel 510mm, Y-Axis Travel 420mm, Z-Axis travel 350mm, Distance from spindle center to table surface 180-530mm, Table dimensions 650mmx420...
U/V Travel +/- 1.28", Taper Angle 15 Deg @ 4.0" Thick, Taper Modes Sharp Corner, Cylindrical, Conical, Independent, Rapid Traverse 36.0 IPM, Wire ...
S/N SL-32-B4-1052, New 2004, Max. Capacity 1.259", Max. Machining Length 8.66", Tool Capacity: Turning OD 6, Front end working ID 7, Cross ...
General Specifications, Travel: , X-Axis 43" , Y-Axis 24" , Z-Axis 580 800/1100: Boxways 23.6" , Spindle Nose to Table Surface 5.3"-28.9" , Spindl...
General Specifications, Pallet Size (2) 24.8" , Travel: X-Axis 33.1" , Travel: Y-Axis 29.9" , Travel: Z-Axis 33.1" , Spindle Speed 10,000 RPM , Sp...
Specifications:, Table Size 26" X 14", Maximum Table Load 3,000 Lbs., Spindle Nose To Table Top 4" – 29", X Axis Travel 20", Y Axis Tr...
Diam. of column 8", Max. distance from column surface to spindle center 29 1/2", Min. distance from column surface to spindle center 8 5/8", Trave...
Tonnage 600 Ton, Capacities: Mild steel over 6" die opening 5/8" x 16', Mild steel over a 8" die opening 3/4" x 14', Overall length of bed and r...
Capacity at max. rake angle 12' x 3/4" (mild steel), Max. rake angle 11/16" per foot, Blade size 1-1/8" x 5", Distance between housings 12' 3", T...
16.5"X, 12.6"Y, 10.6"Z, 10,000 RPM, Max. Tapping 6,000 RPM, 30 Taper, 1200/2000 IPM Rapid, 14 or 26 Position ATC, Coolant System, Hy...
GENERAL SPECIFICATIONS: Table working surface, T-Slotted 33" x 30", Max. Weight Capacity 8,000 Lbs, Blade length 15.'8:, Blade width/gauge 1...
Table size 23.62"x1.81", X-Axis travel 16.54", Y-Axis travel 11.81", Z-Axis Travel 9.84", Main motor 4.1 kW/3.1kW, Spindle Speed 6,000 RPM (3,000 ...
General Specifications, Maximum Swing 50" , Maximum Turning Diameter 43.3" , Maximum Weight on Chuck 4,409 Lbs. , Table/Chuck Diameter 40" , Max. ...
Working barstock dia. 8mm to 32mm, Max. Workpiece length 320 mm, Main spindle max. drilling dia. 12mm, Mains Spindle Max. Tapping dia. M10, B...
32MM CITIZEN MODEL C32-VIII SWISS TYPE SLIDING HEADSTOCK CNC AUTOMATIC LATHE, S/N X12231, NEW 2008
General Specifications, Machining diameter 32mm , Main spindle stroke 320mm , Spindle speed 8000 RPM C-Axis , Spindle Power 7.5 kW , Main spindle ...
General Specifications: S/N 041002, New 1999, Max. Bar Diameter 32mm , Main Spindle Stroke 310mm , Main Spindle Stroke with Driven Cone 295mm , Sp...
20MM STAR SR20 MULTI AXIS SWISS TYPE SLIDING HEADSTOCK CNC AUTOMATIC LATHE, S/N 40827, NEW 1997
General Specifications, Max. Turning Diameter 3/4" (25/32") , Max. Headstock Stroke 8" , Max. Drilling Cap., Stationary Tool 25/64" (10mm) , Power...
20MM STAR SR20 MULTI AXIS SWISS TYPE SLIDING HEADSTOCK CNC AUTOMATIC LATHE, S/N 000973E, NEW 1997
General Specifications, Max. Turning Diameter 3/4" (25/32") , Max. Headstock Stroke 8" , Max. Drilling Cap., Stationary Tool 25/64" (10mm) , Power...
General Specifications, X-Axis Travel 19.7" , Y-Axis Travel 15.7" , Z-Axis Travel 11.8" , Distance Between Table top and Spindle 7.1" to 18.9" , W...
General Specifications, Table size 35.43" x 23.62" , Working area size 23.62" x 13.78" , Table index time 3 seconds , X-axis stroke 19.69" , Y-axi...
General Specifications, Machine: , X-Axis Travel 23.62" , Y-Axis Travel 15.7" , Z-Axis Travel 17.7" , Max. Weight of workpiece 3,500 lbs. , Max. E...
General Specifications, Travels: X 20" Y 20" Z 20" , Pallet Changer: , Pallet size 15.75"x15.75" , Change time 8 sec , Optional Full 4th Axis , Ca...
12.6"X12.6" OKUMA HOWA MILLAC 44H 4-AXIS CNC HORIZONTAL MACHINING CENTER, S/N 48047, NEW 2005
General Specifications, Travel: , X-Axis 16.14" , Y-Axis Spindle 15.55" , Z-Axis (Table back/front) 19.2" , Table to spindle center 0-15.55" , Tab...
General Specifications, Pallet size 19.7"x19.7" , Number of pallets 2 , Max. Pallet Load 1,100 lbs. , Spidle center to pallet top 2.0"-25.6" , Spi...
General Specifications, Travel: , X-axis22.05" , Y-axis20.08" , Z-axis20.08" , Distance from table top to spindle center 2.75" - 22.83" , Distance...
General Specifications, Max. swing 26" , Max. swing over carriage 19.7" - 26" , Note: Depends upon workpiece length, tool magazine , type and Y Ax...
General Specifications, Max. swing/Max. turn 9.06"/9.06" , Max. bar cap 1-5/8" , Dist. Between Spindles 40.06" , Spindle Nose/Bore A2.6/2.4" , Spi...
General Specifications, Swing over bed 21" , Swing over Cross slide 14.5" , Distance between centers 80" , Spindle nose 11" DI Camlock , Spindle S...
General Specifications, Max. Swing Over Bedways 27.9" , Max. Swing Over Carriage 18.8" , Distance Between Centers 154" , Max. Turning Diameter 11....
General Specifications, Chuck size 15"-24" , Max. Swing 31" , Std. Cutting Dia. 22" , Z Travel 24.4" , Max. Part Weight 2,640 lbs. , Tool System 6...
General Specifications, Moving gantry fixed table style , Table size: 60" x 120" Travels: , X axis60" , Y axis120" , Z axis6" , Feed rates: , X ax...
General Specifications, Table 8'x10' , Router Spindle 7 HP Columbo , Table Phenolic grid , Plumped Vacuum Table , Dual Servo Rack & Pinion , Servo...
Max. Profile Size 44"x28",Max. Plate Width 48", Flange Bevels +/- 45 deg., Web Bevels +/- 45 deg (external only), Max. Material Thickness 6", Trav...
General Specifications: S/N V100144, New 2007, Machine Strokes: , Pallet Sizes 23.6" x 15.7" Travel: X25.6" Y19.7" Z17.7" , Table top to spindle f...
KITAMURA MYCENTER 3X APC CNC VERTICAL MACHINING CENTER WITH PALLET CHANGER, S/N 11570, NEW 1996
General Specifications, Table size 16.1" x 35.4" , Maximum table load 1,100 Lbs. , Spindle nose to table top 4.9"-23.0" , X Axis travel 30" , Y Ax...
KITAMURA MYCENTER 1 APC CNC VERTICAL MACHINING CENTER WITH HIGH SPEED AUTOMATIC PALLET CHANGER
General Specifications: S/N 02585, New 1995, Pallet , Pallet size 300x500(11.8"x19.7") , Pallet change time sec 7.5 , Table load capacity kg 80 (...
General Specifications, Table size 41"x22" , Max. Table Load 1760 Lbs. , Spindle Nose to Table Top 5.9"-25.9" , X Axis Travel 40.15" , Y Axis Trav...
MAZAK VTC-16B CNC 3-AXIS VERTICAL MACHINING CENTER, RIGID TRAVELING COLUMN, S/N 117591, NEW 1996
General Specifications, Table size 57.5" x 20" , Max. Table Load 1,210 Lbs. , X-Axis Travel 44" , Y-Axis Travel 16" , Z-Axis Travel 20" , Rapid tr...
MORI SEIKI DURAVERTICAL 1035 ECO 3-AXIS CNC VERTICAL MACHINING CENTER, S/N 610300061E, NEW 2011
General Specifications, Table size 47.2" x 22" , Table load capacity 2,200 lbs. , Max. Workpiece 40.7" x 22" x 24.8" , Table surface to Spindle En...
General Specifications; S/N 55026, New 1986, Table size 98.5" x 33.5" , Table load capacity 6,600 lbs. , Spindle Nose to Table 9.9"-37.9" , X-Axi...
General Specifications, Table size (machine surface) 45.27"x19.68" , Pallet size 45"x19" , Table load capacity 1,540 lbs. , Table Top to Spindle N...
HAMMOND ROTO-FINISH MODEL MP-88-4-5 MULTI PRESS VIBRATORY FINISHING MACHINE, S/N 6378, NEW 2004
General Specifications, Outer Diameter 88" , Channel width 4" , Channel number 5 , Height 52" , Travel 70 , Working Capacity 17'3" , Motor type Un...
General Specifications, Capacity: , Infeed.004 to 1.5" dia. , Thrufeed .004 to 1.5" dia. , Length12' on .5" dia. Wheels: , Grinding wheel, maximum...
General Specifications, Diameter of Spindle 4-1/8" , Spindle Taper #50 , Spindle out Travel 23-1/2" , Rotary Table size 55" x 55" , Table Travel (...
General Specifications, Capacity25,000 LBS , Fork length 60" , Fork width 11" , Lift height 10' , Dimensions 179"L w/Forks x 62"W x 109" Tall , We...
General Specifications, Max. Diameter of work 6.25" , Min. Diameter of work .25" , Max. Workpiece length 27" , Min. Length of work 3" , Max. Swing...
NIKKEN 5AX-130 WA21 COMPACT TILTING ROTARY TABLE - 4TH & 5TH AXIS INDEXER, S/N WA21-1931H, NEW 2007
General Specifications, Diameter of table 105mm (4.1") , with Sub table 130mm(5.1") , Diameter of spindle hole 2.36"x1.18" , Centre height (90 deg...
General Specifications: S/N 900271A,900271b, New 2000, Platter: , Diameter 6.3" , Number of Std T-Slots 6@ 60 Deg. , Spindle-A (Tilt) , Max. Spee...
General Specifications, Capacity (Diameter) .375"-3.125" , Capacity (Length) 48" , Feed length accuracy +/- 0.01" , Minimum Bar Length 15" , Tray ...
General Specifications, Capacity (Diameter) .375"-3.125" , Capacity (Length) 48" , Feed length accuracy +/- 0.01" , Minimum Bar Length 15" , Tray ...
General Specifications, Maximum bar capacity: , Round1 3/16" , Hexagon1.0" , Square13/16" , Maximum length fed out at one tripping 3 9/166" , Spin...
Okuma LB15II-M 3-Axis CNC Lathe with C-Axis & Live Tooling, S/N 0881, New 1993, Distance between centers 20.47" , Swing over bed & carriage...
Technical Specification: Moderate Temperature: 25 to 200F, Work Space Liner: 304 series Stainless Steel, Chamber Dimensions: 48" ...
Technical Specification, Moderate Temperature: -25 F to + 200 F, Work Space Liner: 304 series Stainless Steel, Chamber Dimensions: 48" x ...
Loading...-
63 item(s)/page