Affinez votre recherche
Primary Category
Catégorie
Brand
Item Type
- Lifting Magnet (48)
- Wrench (20)
- Vise (19)
- Fabrication Table (15)
- Drill (11)
- Machine Vise (10)
- Clamp (9)
- Grinder (9)
- C Clamp (7)
- Drill Bit (5)
- Hammer (5)
- Taper (5)
- Taper Shank (5)
- Tooling (5)
- Tong (4)
- Chuck (3)
- Collet (3)
- Die (3)
- Angle Grinder (2)
- Anvil (2)
- Beveler (2)
- Chisel (2)
- Cutter (2)
- End Mill (2)
- Mill (2)
- Surface Plate (2)
- Tombstone (2)
- Torque Wrench (2)
- Abrasive Wheel (1)
- Air Chisel (1)
- Air Tool (1)
- Angle Drill (1)
- Bar Clamp (1)
- Bolt Cutter (1)
- Bolts (1)
- Bore (1)
- Broach (1)
- Carousel (1)
- Cut Off Wheel (1)
- Drill Chuck (1)
- Hold Down (1)
- Knockout Punch (1)
- Lathe (1)
- Magnetic Base (1)
- Parts Washer (1)
- Pipe Cutter (1)
- Pipe Threader (1)
- Pneumatic Scaler (1)
- Punch Set (1)
- Quick Change Tool (1)
- Riser (1)
- SPADE (1)
- Soldering Iron (1)
- Spade Drill (1)
- Tap (1)
- Threader (1)
- Tool Holder (1)
- Tube Bender (1)
- Worktable (1)
État/ Province
Ville
Filtered by:
- Catégorie
- Liste
- Grille
-
154 item(s)/page
Ce commissaire-priseur a choisi de ne pas publier ses résultats. Veuillez le contacter directement pour toute demande de renseignements.
LOT: (approx. 16) Assorted Heavy Duty C-Clamps on Material Cart
LOT: (approx. 15) Assorted Heavy Duty C-Clamps on Material Cart
LOT: (approx. 20) Assorted C-Clamps
LOT: (approx. 20) Assorted C-Clamps
LOT: Assorted Bar Clamps on Pallet
LOT: Assorted Bar Clamps on Pallet
LOT: Assorted Combination Wrenches, Pry Bars, Hammers, Allen Wrenches in Crate
LOT: Assorted Large Taper Shank Drill Bits, Large Roughing Endmills, Allen Wrenches, Drill Chucks &
LOT: Assorted Large Taper Shank Drill Bits, Large Roughing Endmills, Allen Wrenches, Drill Chucks & Keys, (2) Sledge Hammers, Misc. Tooling in Cra...
LOT: Assorted Taper Shank Drill Bits, Allen Wrenches, Tie-Down Equipment, Hammers, etc. in Crate
LOT: Assorted Taper Shank Drill Bits, Allen Wrenches, Tie-Down Equipment, Hammers, etc. in Crate
LOT: Assorted Large Roughing Endmills, Taps, Spade Drills, Taper Shank Drill Bits, Chuck Keys, Wrenc
LOT: Assorted Large Roughing Endmills, Taps, Spade Drills, Taper Shank Drill Bits, Chuck Keys, Wrenches, Tooling, etc.
LOT: (2) Crates with Assorted Tooling
LOT: Assorted Taper Shank Drill Bits, Collets, Tool Bushings, etc. on Material Cart
LOT: (2) Carts of Assorted Tooling & Tie-Down Equipment, (1) 8" 3-Jaw Chuck
LOT: (3) Carts & (1) Pallet of Assorted Tie-Down Equipment & Risers
Core Bore Wet Diamond Core Bit 15" (UNUSED IN BOX)
Palmgren Powergrind 7" Bench Top Grinder
LOT: Portable Pipe Threading Station w/Ridgid 300 Pipe Threader, 4" Vise, Hand Threaders, NEW & Used
LOT: Portable Pipe Threading Station w/Ridgid 300 Pipe Threader, 4" Vise, Hand Threaders, NEW & Used Threaders, Pipe Cutters, etc.
Parlec 6" Machine Vise w/Handle
Parlec 6" Machine Vise w/Handle
6" Morgan Vise on 10' x 32" Steel Table (NO CONTENTS)
LOT: Snap-On Tool Pulley Set, (2) Snap-On Torque Meters Torque Wrenches
LOT: Greenlee 735/735BB Knockout Punch Set, (2) SPI 7-Piece Jack Screw Set, TBI Punch & Die Set, Alo
LOT: Greenlee 735/735BB Knockout Punch Set, (2) SPI 7-Piece Jack Screw Set, TBI Punch & Die Set, Aloma "BB" Shim Set, Ram Set Fastener
LOT: 36" Pipe Wrench, Ridgid 1-2 Hex Wrench, Bolt Cutters, Ridgid Tube Bender, Craftsman Pipe Vise,
LOT: 36" Pipe Wrench, Ridgid 1-2 Hex Wrench, Bolt Cutters, Ridgid Tube Bender, Craftsman Pipe Vise, (3) Fish Tapes
LOT: Ridgid 24" Pipe Wrench, 18" Pipe Wrench, Assorted Combination Wrenches, etc.
LOT: Assorted Ridgid Pullers, Pullers, Soldering Guns, Starrett Hole Saws, Hole Saws
LOT: Posi Lock Model 110 Gear & Bearing Puller, Pullers, Ingersoll Rand Pnuematic Air Hammer, Air Ha
LOT: Posi Lock Model 110 Gear & Bearing Puller, Pullers, Ingersoll Rand Pnuematic Air Hammer, Air Hammer
LOT: Pneumatic Scaler, Hand Scaler, (2) Air Chisels
LOT: (4) Dynabrade Nitro Series DGR31 .3 HP Right Angle Grinders, 1/4" Collet, 18,000 RMP, Rear Exha
LOT: (4) Dynabrade Nitro Series DGR31 .3 HP Right Angle Grinders, 1/4" Collet, 18,000 RMP, Rear Exhaust (NEW IN BOX)
LOT: (4) Dynabrade Nitro Series DGR31 .3 HP Right Angle Grinders, 1/4" Collet, 18,000 RMP, Rear Exha
LOT: (4) Dynabrade Nitro Series DGR31 .3 HP Right Angle Grinders, 1/4" Collet, 18,000 RMP, Rear Exhaust (NEW IN BOX)
LOT: (1) Pneumatic Rust Chipper, (2) Chisels, (3) Breakers
LOT: (3) Pneumatic Vertical Grinders w/Fibre Discs
LOT: (2) Ingersoll Rand Pneumatic Impact Wrenches w/(2) 1-1/4" Sockets
LOT: (2) Ingersoll Rand Pneumatic 1/2" Impact Wrenches
LOT: (2) Ingersoll Rand Pneumatic 1/2" Impact Wrenches w/(1) 1-1/4" Socket
LOT: (2) Ingersoll Rand Pneumatic 1/4" Impact Wrenches
LOT: (2) Dayton Pneumatic 1/2" Impact Wrenches
LOT: (2) Pneumatic Impact Wrenches w/(1) 1-1/16" Deep Socket
LOT: (3) Chicago Pneumatic Impact Wrenches
LOT: (2) Chicago Pneumatic Impact Wrenches
LOT: (1) OPT Pneumatic 1/2" Impact Wrench, (1) OPT Pneumatic 3/4" Impact Wrench
LOT: (2) 1/2" Pneumatic Impact Wrenches
LOT: Assorted Pnuematic Air Tools
LOT: Assorted Pnuematic Air Tools
LOT: (1) Dynabrade Pneumatic Grinder, (1) Ingersoll Rand Pneumatic Grinder, (3) Right Angle Pneumati
LOT: (1) Dynabrade Pneumatic Grinder, (1) Ingersoll Rand Pneumatic Grinder, (3) Right Angle Pneumatic Grinders
LOT: (5) Pneumatic Drills, (1) Pneumatic Grinder
LOT: (4) Pneumatic Drills, Pneumatic Impact Wrench, Pneumatic Grinder
LOT: Dynabrade Air Belt Sander, Ingersoll Rand Impact Wrench, Turbo-Burr, (2) Air Drills, etc.
LOT: Dynabrade Air Belt Sander, Ingersoll Rand Impact Wrench, Turbo-Burr, (2) Air Drills, etc.
LOT: (2) Mini Beveler AMB-0307 Pneumatic Beveler
LOT: (2) Mini Beveler AMB-0307 Pneumatic Beveler
Kurt 8" Vise w/Handle in Crate
Kurt 8" Vise w/Handle in Crate
LOT: (6) Disassembled Kurt Vises, Spare Kurt Vise Parts
Disassembled Kurt 8" Machine Vise
Disassembled Kurt 8" Machine Vise
Bodee 5" Tilt & Swivel Milling Machine Vise
Bodee 5" Tilt & Swivel Milling Machine Vise
-
154 item(s)/page