Affinez votre recherche
Filtered by:
- Catégorie
- Liste
- Grille
-
41 item(s)/page
Ce commissaire-priseur a choisi de ne pas publier ses résultats. Veuillez le contacter directement pour toute demande de renseignements.
Grinder
Dayton bench grinder model 4Z909D, 8 inch, serial 3205, three-quarter horsepower, 120 V, mounted on base.
Milwaukee, Kearney & Trecker horizontal mill, s/n 19-8943, 25-1,500 rpm, 15" x 50" table, it is not a universal table, has the optional PCF feat...
Alzmetall 1997 drill press, model AB4/SB, s/n 20261, geared head, 2-speed with tapping, 900 and 1,800 rpm, the gear shifter is 35-125 rpm, 70-250 ...
Doosan 2012 vertical machining center, model DNM500, s/n MV0010-001225, 220 volt, this unit has the chip auger and chip conveyors, X 40.20, Y 21.3...
Bridgeport Vertical Mill
Bridgeport vertical mill, s/n 12BR204251, this is a Series 2, 2 hp base, the mill head has been replaced with an old model J head which is step ...
Clausing Ibarmia 2007 geared head drill press, model B50, s/n 075556, 220/440 volt, 3-phase, tapping capabilities, coolant, 66-1,255 rpm, geared h...
Doosan Daewoo 2005 CNC lathe, model Puma 240C, s/n PM241846, 2-axis machine, Fanuc 21I-TB control, chip conveyor, 10 tool turret, 10" 3-jaw chuck,...
Doosan 2008 vertical machining center, model MV4020L, s/n NM5100454, 220/440 volt, 40" X-axis, 20" Y-axis, 20" Z-axis, Cat 40 spindle taper, 12,00...
Lapointe horizontal broach, model HP-15, s/n H64027, this machine was retrofitted by Broaching Machine Specialties, 50" stroke, retrofitted to ful...
Engine Lathe
Leblond Regal engine lathe, s/n 7E1412, 24" swing, 78" C to C, PCF, PLF, thread dial, no taper attachment, does not have the back chip guard, d...
Drill press
Ibirma drill press, geared head, currently non-functioning. ...[more]
Mazak 2005 vertical machining center, model DNC-510C Nexus, s/n 172982, 40" X-axis, 20" Y-axis, 20" Z-axis, 15,000 rpm spindle, through spindle co...
Bridgeport vertical mill, Series 1, 2 hp, s/n 12BR161252, 9" x 48" T-slotted table with a shaper attachment, One Shot Lube, no cross feed, no r...
Bridgeport vertical mill, model J- head with step pulley, s/n 12BR157240, 9" x 42" table PCF, 28-4,200 rpm, does not have One Shot Lube, 440/208...
Clausing/Colchester engine lathe, 15" Series, s/n 6/0055/3397DD, 15" swing, 54" C to C, 10" 3-jaw chuck, PCF, PLF, thread dial, 4-jaw chuck, stead...
Doosan 2007 vertical machining center, model MV3016L, s/n NM40100912, 200 volt, 3-phase, 30" X-axis, 15" Y-axis, 18" Z-axis, 30 tool automatic too...
Bridgeport vertical mill, Series 1, 1-1/2 hp motor, s/n 12BR215017, 208/220/230/460 volt 3-phase, 9" x 42 table, Anilam Mini Wizard 2-axis digi...
Amera-Seiki 1996 CNC lathe, model TC-25L, s/n 83015, 2-axis machine, 12" Kitagawa 3-jaw chuck, chip conveyor, 10 tool turret, non programmable ...
Mazak 2008 vertical machining center, model VCN510-2 Nexus, s/n 205157, 40" X-axis, 20" Y-axis, 20" Z-axis, 15,000 rpm, 24 tool changer, Mazatrol ...
Fadal 2002 vertical machining center, model 4020, s/n 012002074503, needs a solenoid air valve to be functioning, 480 volt, 3-phase, 50" x 20" T-s...
Mazak 2004 vertical machining center, model Nexus VCN-510C, s/n 168968, 208 voltage, 3-phase, 3-axis machine, does not have the 4th axis, 40/20" X...
CNC Okuma lathe
2006 Okuma Captain, model L370 MW, SN 123701, includes LNS Servo bar feeder, serial number 150766, 21” swing, 13 ½” maximum turning diameter, 12 s...
Tooling
[13] Assorted tooling, insert ,thru spindle coolant, various sizes and types.
Doosan 2009 vertical machining center, model DFV-4020, s/n AV5E-2429, 220 volt, 3-phase, 40" X-axis, 20" Y-axis, 32" Z-axis 32" extended Z travel,...
CNC machining center
2000 Fadal Vertical CNC machining center model, VMC 5020AHT model 917, sn 012000070982. Needs an operating card in the control, it is currently n...
Hydraulic power supply
Pneumatic over hydraulic power supply, footpedal, currently being used on a customize fixture, power supply only
Magnetic chuck controller
Neutral magnetic chuck controller an 1008N034, this came off of a Blanchard grinder.
Cast-iron layout table
Cast-iron layout table, this is the table which the Faro arm was using, table only.
-
41 item(s)/page