Affinez votre recherche
Primary Category
Catégorie
Brand
Item Type
- Spindle (11)
- Taper (5)
- Chip Conveyor (3)
- Feed (3)
- Chuck (2)
- Lathe (2)
- Tool Changer (2)
- Tooling (2)
- Vacuum (2)
- tool (2)
- 3 Axis (1)
- 4th Axis (1)
- Bar Feed (1)
- Bearing (1)
- CNC Lathe (1)
- Chucker (1)
- Control System (1)
- Drill (1)
- Edge Bander (1)
- Hold Down (1)
- Hopper (1)
- Hydraulic Shear (1)
- Indexer (1)
- Industrial Controller (1)
- Knife (1)
- Metal Fabricating Equipment (1)
- Metalworking Chucker (1)
- Mill (1)
- Milling Machine (1)
- Oil (1)
- Plate (1)
- Pump (1)
- Screw (1)
- Servo (1)
- Servo Drive (1)
- Shear (1)
- Shears (1)
- Tap (1)
- Touch Probe (1)
- Vacuum Pump (1)
- Vertical Mill (1)
État/ Province
Ville
Filtered by:
- Catégorie,
- État/ Province
- Liste
- Grille
-
18 item(s)/page
Ce commissaire-priseur a choisi de ne pas publier ses résultats. Veuillez le contacter directement pour toute demande de renseignements.
SWING: 5.91″ MACHINING LENGTH: 3.15″ # AXIS: 4 BAR CAPACITY: 1.65″ MAX. TURNING DIAM.: 5.91″ POWER: 15 HP MAX RPM: 4,500 RPM LIVE TOOLING: YES # O...
TOYODA FH630SX HMC, 2014 - SPINDLE CHILLER, MAGAZINE, SKID OF SHEET METAL, TRANSFORMER, COOLANT TANK
X TRAVEL (COLUMN): 39.37 IN Y TRAVEL (SPINDLE VERTICAL): 31.50 IN Z TRAVEL (WORKTABLE CROSS): 33.46 IN PALLET SIZE: 24.8" X 24.8" PALLET WORKLOAD ...
HAAS SL-20T, 2004 – HAAS SERVO 300 BAR FEED, TAIL STOCK VOP-C TOOL PRESETTER HIGH INTENSITY LIGHTING
MAX SWING: 23″ MAX BAR CAPACITY: 2″ MAX TURNING DIAMETER: 10.3” MAX TURNING LENGTH: 20″ X-AXIS TRAVEL: 8.45″ Z-AXIS TRAVEL: 20″ RAPID TRAVERSE RAT...
DMG MORI MILLTAP 700 VMC, 2013
X-AXIS TRAVEL: 27.6″ Y-AXIS TRAVEL: 16.5″ Z-AXIS TRAVEL: 15″ TABLE SIZE: 33.1″ X 16.5″ MAX TABLE LOAD: 882 LBS SPINDLE MOTOR: 15 HP SPINDLE SPEED:...
DMG MORI MILLTAP 700 VMC, 2013
X-AXIS TRAVEL: 27.6″ Y-AXIS TRAVEL: 16.5″ Z-AXIS TRAVEL: 15″ TABLE SIZE: 33.1″ X 16.5″ MAX TABLE LOAD: 882 LBS SPINDLE MOTOR: 15 HP SPINDLE SPEED:...
4' X 8 ' CNC FACTORY SIDEWINDER XPR CNC ROUTER, 2022 12HP ATC AIR COOLED SPINDLE, DRIVERLESS SERVO DRIVE SYSTEM WITH DIRECT HELICAL RACK AND PINI...
X AXIS TRAVEL: 19.7″ Y AXIS TRAVEL: 15.7″ Z AXIS TRAVEL: 11.8″ SPINDLE RPM: 16,000 TAPPING RPM: 6,000/8,000 RAPID TRAVERSE: 1,969 IPM (2205 Z-AXIS...
TABLE SIZE: 60″ X 120″ GANTRY: RAPID TRAVEL: 900″/MIN MAX CUT SPEED: 600″/MIN GANTRY HEIGHT: 12″ GANTRY CLEARANCE: 7″ 20MM HEAVY DUTY LINEAR BEAR...
X 24″ Y 24″ Z 24″ TABLE LOAD 350LBS SPINDLE MOTOR 30HP RPM 15,000 RPM # ATC 50 TAPER CAT40 PALLET-W 15.75″ PALLET-L 15.75″ FULL 4TH AXIS EQUIPPED...
1- 5MM BORING AND INSERTING UNIT WITH VIBRATORY HOPPER 1-8MM BORING AND INSERTING UNIT WITH VIBRATORY HOPPER POWER: 208V-220V, 3 PHASE, 30 AMPS 96...
EDGE BANDER 6-STATION: INFRARED PRE HEAT, GLUING, INDEPENDENT FRONT AND REAR TRIMMING, INDEPENDENT TOP AND BOTTOM TRIMMING, INDEPENDENT TOP AND BO...
TABLE SIZE – 74.8 X 51.2 IN MAX WEIGHT ON TABLE – 13,200 LBS X AXIS TRAVEL – 63 IN Y AXIS TRAVEL – 51.2 IN Z AXIS TRAVEL – 27.6 IN SPINDLE SPEED –...
X-AXIS TRAVEL: 27.6″ Y-AXIS TRAVEL: 15.7″ Z-AXIS TRAVEL: 11.8″ SPINDLE SPEED: 27,000 RPM SPINDLE TAPER: CAT 30 SPINDLE MOTOR: 13.5 HP TOOL MAGAZIN...
SPECIFICATIONS CUTTING CAPACITY – MILD STEEL: ⅜” OVERALL CUTTING LENGTH: 144” RAKE ANGLE: 7/16” / FOOT NUMBER OF HYDRAULIC HOLD-DOWNS: 15 HOLD DO...
3-AXIS VERTICAL MACHINING CENTRE WITH ROTO-PALLET X-AXIS TRAVEL: 20.1 INCHES Y-AXIS TRAVEL: 20.1 INCHES Z-AXIS TRAVEL: 20.1 INCHES DISTANCE SPINDL...
DAHLIH VERTICAL MILL MODEL #: OL-MCV (MCV-1350) DATE OF MFG.: 5/1991 SERIAL #: I850235 Item Location - Roscoe, IL
OFFICE LATHE BAR CAPACITY: 1″ # AXIS: 2 POWER: 7.5 HP MAX RPM: 6,000 RPM TURNING DIA: 4.95″ SWING: 4.95″ MACHINING LENGTH: 8″ CASTER WHEEL SET E...
MAX. CUTTING LENGTH: 72″ MAX CUTTING CAP: 10GA MILD STEEL RAKE OF UPPER BLADE: 1/4″ NUMBER OF HOLD DOWNS (HYDRAULIC): 8 HOLD DOWN TONNAGE: 3.5 TON...
Loading...-
18 item(s)/page