Affinez votre recherche
Primary Category
Catégorie
Brand
Item Type
État/ Province
Ville
Filtered by:
- Item Type,
- Ville
- Liste
- Grille
-
19 item(s)/page
Ce commissaire-priseur a choisi de ne pas publier ses résultats. Veuillez le contacter directement pour toute demande de renseignements.
TABLE SIZE: 10″ X 50″ LONGITUDINAL TRAVEL: 30″ CROSS TRAVEL: 14″ VERTICAL (KNEE): 15″ QUILL TRAVEL: 5″ SPINDLE SPEED: 60 – 4200 RPM SPINDLE TAPER:...
BRIDGEPORT EZ TRAK II MODEL: EX TRAK SERIES II SERIAL: EZ2-CH-876 WORKING SURFACE OF TABLE: 11" X 58" MAXIMUM LOAD ON TABLE: 600 LBS X-AXIS TRAVEL...
SERIAL: 5531D5U-0040 SURFACE AREA: 10" X 48″ T-SLOT CENTER DISTANCE: 3 @ 2-3/8″ CENTERS T-SLOT SIZES: 11/16″ X-AXIS TABLE TRAVEL: 16″ Y-AXIS TABLE...
DAEWOO LYNX 200 CNC LATHE MODEL: 200A SERIAL: L2000872 YEAR: 1999 TURBO CONVEYOR MODEL: 5475-8082 SERIAL: 347193 MAX TURNING DIAMETER: 11.02″ MAX ...
DAEWOO LYNX 200 CNC LATHE MODEL: LYNX 200A SERIAL: L2000234 YEAR: 1998 MAX TURNING DIAMETER: 11.02″ MAX TURNING LENGTH: 19.68″ MAX BAR CAPACITY: 1...
WEILER MATADOR LATHE WITH DRO
CENTER HEIGHT: 150 MM CENTER WIDTH: 500 MM GR. SWING DIAMETER OVER BED:300MM OVER CROSS SLIDE: 160 MM SPINDLE BORE: 36 MM MOUNTING CONE OF THE TAI...
TREE JOURNEYMAN VERTICAL MILL TABLE SIZE: 10″ x 44″ TABLE TRAVEL (X): 27″ SADDLE TRAVEL (Y): 14″ QUILL TRAVEL (Z): 5″ KNEE TRAVEL (MANUAL): 15.75″...
HARDINGE LATHE DSM 59
MODEL: DSM 59 MAX SWING: 9" BED LENGTH: 30.5" TURRET STATIONS: 6 STATIONS SPINDLE NOSE: 5C THREADED SPINDLE SPEEDS: 230-3500 RPM VARIABLE BAR CAPA...
SERIAL:S55472 12″ X 36″ HYDRAULIC SURFACE GRINDER 12″ X 36″ ELECTROMAGNETIC CHUCK LONGITUDINAL TABLE SPEED: 125 FPS TABLE TRAVEL LONGITUDINAL: 38″...
DAEWOO LYNX 200 CNC LATHE MODEL:200A SERIAL:L2000294 YEAR:1998 MISSING 2 HYDRAULIC HOSES, ENCODER WIRE, MONITOR IS OUT, SOME BUTTONS ON KEYBOARD D...
DAEWOO LYNX 200 CNC LATHE MODEL: LYNX 200A SERIAL: L2000562 YEAR: 1998 MAX TURNING DIAMETER: 11.02″ MAX TURNING LENGTH: 19.68″ MAX BAR CAPACITY: 1...
2001 DAEWOO PUMA 300 CNC LATHE MODEL: 300B SERIAL:PM2500864 YEAR: 2001 SWING OVER BED: 570 MM SWING OVER SADDLE: 370 MM MAX MACHINING DIAMETER: 40...
MODEL: VF-4 VMC SERIAL: 18657 YEAR: 1999 TABLE SIZE: 52″ X 18″ MAX. TABLE LOAD: 3,500 LBS SPINDLE NOSE TO TABLE TOP: 4″ – 29″ X-AXIS TRAVEL: 50″ Y...
2008 DOOSAN PUMA 240MS CNC TURNING CENTER-LIVE TOOLING, SUB SPINDLE, COLLET CHUCK, LNS CHIP CONVEYOR
2008 DOOSAN PUMA 240 MS CNC LATHE WITH LIVE TOOLING, SUB SPINDLE (NO TOOLING), 16C COLLET CHUCK, LNS CHIP CONVEYOR MODEL: PUMA 240 MSB SERIAL: 24...
HAAS VF-3 VMC MODEL: VF-3 SERIAL: 22487 YEAR: 2000 X AXIS TRAVEL: 40" Y AXIS TRAVEL: 20" Z AXIS TRAVEL: 25" RAPID RATE X AXIS: 1,000 IPM RAPID RAT...
HAAS VF-6 VMC MODEL: VF-6 SERIAL:7355 YEAR: 1996 AXIS TRAVEL: 64" Y AXIS TRAVEL: 32" Z AXIS TRAVEL: 30" RAPID RATE X AXIS: 900 IPM RAPID RATE Y AX...
HAAS VF-3 VMC MODEL: VF-3 SERIAL: 17619 YEAR: 1999 X AXIS TRAVEL: 40" Y AXIS TRAVEL: 20" Z AXIS TRAVEL: 25" RAPID RATE X AXIS: 1,000 IPM RAPID RAT...
HAAS VF-2 VMC MODEL: VF-2 SERIAL: 18491 YEAR: 1999 SPINDLE HORSEPOWER: 20 HP MAX SPINDLE SPEED (RPM): 0 – 7500 SPINDLE TAPER: CAT 40 SPINDLE MOTOR...
HAAS VF-2 VMC MODEL: VF-2 SERIAL: 10476 YEAR: 1997 (BAD CONTACTOR, BAD SPINDLE DRIVE) SPINDLE HORSEPOWER: 20 HP MAX SPINDLE SPEED (RPM): 0 – 7500...
Loading...-
19 item(s)/page