Affinez votre recherche
Primary Category
Catégorie
Brand
- Fanuc (5)
- Acer (2)
- Cincinnati (2)
- Ex cell o (2)
- Ikegai (2)
- Long (2)
- Summit (2)
- Barber Colman (1)
- Bridgeport (1)
- Buffalo (1)
- Clausing (1)
- Delta (1)
- Doall (1)
- Doosan (1)
- Enshu (1)
- Fellows (1)
- G&L (1)
- General (1)
- Kent (1)
- LNS (1)
- LeBlond (1)
- Lincoln (1)
- Linde (1)
- Meuser (1)
- Pratt and Whitney (1)
- Rockwell (1)
- Sunnen (1)
- Supermax (1)
- Tacchi (1)
- Walker (1)
- Walker Turner (1)
- Whitney (1)
- YCM (1)
Item Type
- Lathe (12)
- Spindle (12)
- Feed (7)
- Taper (7)
- Drill Press (6)
- Drilling Machine (6)
- Engine Lathe (6)
- Milling Machine (6)
- Quill (6)
- CNC Lathe (4)
- Chuck (4)
- Chip Conveyor (3)
- Cross Slide (3)
- Mill (3)
- Boring Mill (2)
- Collet (2)
- Grinder (2)
- Shaper (2)
- Tooling (2)
- Belt Grinder (1)
- Boring Machine (1)
- Cutting Machine (1)
- Forge (1)
- Gear Hob (1)
- Gear Manufacturing (1)
- Gear Shaper (1)
- Grinding Machine (1)
- Honing Machine (1)
- Horizontal Boring Mill (1)
- Knee Mill (1)
- Power Feed (1)
- Surface Grinder (1)
- Tool Changer (1)
- Turning Center (1)
- Vertical Milling Machine (1)
État/ Province
Ville
Filtered by:
- Catégorie
- Liste
- Grille
-
38 item(s)/page
Ce commissaire-priseur a choisi de ne pas publier ses résultats. Veuillez le contacter directement pour toute demande de renseignements.
BID QUICKLY. LOTS ARE STAGGERED TO END EVERY 60 SECONDS WHEN AUCTION BEGINS CLOSING AND WILL BE EXTENDED BY 7 MINS FROM TOP BID.
2008 DOOSAN PUMA 240MS CNC TURNING CENTER-LIVE TOOLING, SUB SPINDLE, COLLET CHUCK, LNS CHIP CONVEYOR
2008 DOOSAN PUMA 240 MS CNC LATHE WITH LIVE TOOLING, SUB SPINDLE (NO TOOLING), 16C COLLET CHUCK, LNS CHIP CONVEYOR MODEL: PUMA 240 MSB SERIAL: 24...
ANGLE PLATE 12" X 8" X 10"
ANGLE PLATE 12" X 8" X 10" All specifications are assumed to be correct but must be confirmed by the purchasing entity. Abandonment: If the lot ...
DELTA ROCKWELL 17-600 DRILL PRESS Item Location - Evansville, IN Estimated loading charge: $100. See important info for more details.
DURACRAFT MSS-302 DRILL PRESS
DURACRAFT MSS-302 DRILL PRESS Item Location - Evansville, IN Estimated loading charge: $100. See important info for more details.
LINCOLN S-24B DRILL PRESS
LINCOLN S-24B DRILL PRESS Item Location - Evansville, IN Estimated loading charge: $100. See important info for more details.
ACER ULTT 1A-3VS DRILL PRESS
ACER ULTT 1A-3VS DRILL PRESS YEAR: 1997 Item Location - Evansville, IN Estimated loading charge: $200. See important info for more details.
EX-CELL-O RAM TURRET MILLING MACHINE Item Location - Evansville, IN Estimated loading charge: $200. See important info for more details.
EX-CELL-O RAM TURRET MILLING MACHINE Item Location - Evansville, IN Estimated loading charge: $200. See important info for more details.
SUMMIT 16X40 ENGINE LATHE
SUMMIT 16X40 LATHE Item Location - Evansville, IN Estimated loading charge: $200. See important info for more details.
ACER DYNAMIC 1760G HIGH SPEED ENGINE LATHE Item Location - Evansville, IN Estimated loading charge: $200. See important info for more details.
KENT TW-32QI CNC BED MILLING MACHINE WITH ANILAM 3000M CONTROL Item Location - Evansville, IN Estimated loading charge: $250. See important info...
LEBLOND TAPE-TURN REGAL LATHE Item Location - Evansville, IN Estimated loading charge: $500. See important info for more details.
BUFFALO FORGE DRILL PRESS
BUFFALO FORGE DRILL PRESS Item Location - Evansville, IN Estimated loading charge: $100. See important info for more details.
HAMMOND 1000-D ABRASIVE BELT GRINDER Item Location - Evansville, IN Estimated loading charge: $50. See important info for more details.
WALKER TURNER DRILL PRESS
WALKER TURNER DRILL PRESS Item Location - Evansville, IN Estimated loading charge: $100. See important info for more details.
MEUSER & CO. BORING MILL W/ BORING ATTACHMENT Item Location - Evansville, IN
THE FELLOWS GEAR SHAPER NO. 645
THE FELLOWS GEAR SHAPER MODEL: 645 GUIDE: SPUR MAXIMUM EXTERNAL PITCH DIAMETER: 18" MAXIMUM INTERNAL PITCH DIAMETER: 18" DIAMETRAL PITCH SPUR 3/4 ...
BARBER-COLMAN 14-15 GEAR HOB
BARBER-COLMAN 14-15 GEAR HOB SPECIFICATIONS MAXIMUM DP AND DIAMETER IN STEEL, 1 CUT: 3.5 DP ON 4" DIA MAXIMUM RATED WORK DIAMETER: 14" MAXIMUM TR...
PRATT & WHITNEY 6” VERTICAL SHAPER MODEL B SERIAL: 822 MODEL: B LENGTH OF STROKE: 6" VERTICAL ADJUSTMENT OF RAM: 10" DIAMETER OF ROTARY TABLE: 19-...
CINCINNATI DIAL TYPE MILLING MACHINE MODEL: 310-14 PLAIN DIAL TYP1 SPECIFICATIONS: WORKING SURFACE OF TABLE: 65-1/4INCH X 14INCH LONGITUDINAL TRAV...
CINCINNATI MONOSET MILLING MACHINE MOTOR AC VOLT: 460 PHASE: 3 HZ: 60 CB INTERRUP. AMP: 30 All specifications are assumed to be correct but must...
CLAUSING 5950 LATHE
CLAUSING 5950 LATHE Item Location - Evansville, IN Estimated loading charge: $200. See important info for more details.
CADILLAC 1440G ENGINE LATHE
CADILLAC 1440G LATHE CAPACITY: 14" / 21-1/2" X 40" SWING OVER CROSS SLIDE: 8 1/4" DISTANCE BETWEEN CENTERS: 40" HOLE THRU SPINDLE: 1-1/2" WIDTH O...
SUNNEN MBB-1660 PRECISION HONING MACHINE SPECIFICATIONS: .060 IN. TO 6.500 IN. DIAMETER1/8 IN. TO 16 IN. LONGANY MATERIAL, REGULAR OR ODD-SHAPED ...
LINDE ULTRAGRAPH RC SERIES SHAPE CUTTING MACHINE TYPE: CM 85 60 F SERIAL NO: IX 85344 OPERATING RADIUS: 60" CIRCLE MAX DIAMETER: 55" STRAIGHT LINE...
FEATURES: FANUC OI-TD CNC CONTROL 4-JAW CHUCK 17.71" STEADY REST CHIP CONVEYOR COOLANT EQUIPMENT CAPACITY: MAXIMUM SWING OVER BED 53.14" MAXIMUM S...
G&L H70 WORK CENTER 6" SPINDLE 6 AXIS 24' X 12' Y 48" Z 10' X 10' ROTARY TABLE 50 TON LOAD #50 SPINDLE FANUC 15 CNC CONTROLS All specifications ...
BRIDGEPORT KNEE MILL
BRIDGEPORT KNEE MILL TABLE TRAVEL WITH POWER FEED (X-AXIS): 36 IN TABLE TRAVEL WITHOUT POWER FEED (X-AXIS): 31 IN SADDLE TRAVEL (Y-AXIS): 12 IN Q...
SUMMIT ENGINE LATHE
SUMMIT ENGINE LATHE Item Location - Evansville, IN Estimated loading charge: $200. See important info for more details.
DOALL SURFACE GRINDER
DOALL SURFACE GRINDER Item Location - Evansville, IN Estimated loading charge: $100. See important info for more details.
LONGEM LG2080D GAP BED ENGINE LATHE SWING OVER BED WAYS: 20" SWING OVER GAP: 28-11/32" SWING OVER CROSS SLIDE: 11-13/16" WIDTH OF GAP: 8-1/4" MAX...
SUPERMAX VERTICAL MILLING MACHINE TABLE SIZE: 9″ X 49″ LONGITUDINAL TABLE TRAVEL: 34″ CROSS TRAVEL: 12″ VERTICAL KNEE TRAVEL: 16″ RAM TRAVEL: 12″...
MACHINING CAPACITY MAX. TURNING DIAMETER: 23.23 IN MAX. TURNING LENGTH: 46.81 IN MAIN SPINDLE CHUCK SIZE: 15 IN SPINDLE NOSE: A2-8 HOLE THROUGH ...
IKEGAI AX-15Z CNC LATHE, 1985
CHUCK: 10" BAR CAPACITY: 1.75" AXIS: 2 TURNING DIAMETER: 15.5" SWING: 8.5" MACHINING LENGTH: 15.7" TAILSTOCK: YES APPROX. DIMENSIONS: 108" X 48" X...
IKEGAI TU-30 CNC LATHE, 1988
SWING OVER BED: 25.9IN / 660MM SWING OVER CROSS-SLIDE: 17.3IN / 440MM MAX WORKING LENGTH: 57.5IN DISTANCE BETWEEN CENTERS: 59.1IN SPINDLE BORE: 3....
DAHLIH MCV-2100 VMC, 2000
CONTROL: FANUC SERIES 15MEE-B-4 TABLE SIZE: 90.55" X 38.19" MAXIMUM TABLE LOAD: 6,600 LBS. X-AXIS TRAVEL: 82.68" Y-AXIS TRAVEL: 34.25" Z-AXIS TRAV...
ENSHU VMC 650 (UNSURE OF YEAR)
HEAVY BOX WAY JAPANESE CONSTRUCTION FANUC 11M CNC CONTROL HIGH PRECISION 4,000 RPM SPINDLE 50 TAPER GEARED HEAD SPINDLE 30 TOOLS SIDE MOUNT BIDIRE...
Loading...-
38 item(s)/page