ASSETS ARE LOCATED .FOR EXACT ADDRESS PLEASE REFER TO WINNERS EMAIL INVOICE.

CONTROL: ALTA84 TURBO MAXIMUM DIAMETER: 6.5″ NON-ROUND TUBE PROFILES CAPABILITIES: UP TO 5×5 INCH SQUARE MAXIMUM WATTAGE: 2000 X-Y-Z STAGES WITH T...

1992 WEBB MILLING MACHINE MODEL 5VK WITH SWI PROTOTRAK MX2 MFG NO 813836 TABLE TRAVEL (X-AXIS): 32″ SADDLE TRAVEL (Y-AXIS): 16″ QUILL TRAVEL: 6″ K...

1999 SOUTHWESTERN INDUSTRIES TRAK DPM 3 AXIS CNC VERTICAL BED MILL TABLE SIZE:50" X 10" X-AXIS TRAVEL:31" Y-AXIS TRAVEL:17" Z-AXIS TRAVEL:23.5" SP...

2015 WEBB MILLING MACHINE 5EVS-1050 WITH SWI PROTOTRAK SMC 3 AXIS CNC CONTROL MFG NO: 10413201 DATE: 05-2015 HTTPS://WWW.WEBBMACHINERY.COM/WP-CONT...

CAT NO 522 HP 1/2 115 VOLTS SN F1264 Item Location - Plymouth, WI ...[more]

CHUCK SIZE: 25″ SWING OVER BED WAYS: 35″ SWING OVER CROSS SLIDE: 16″ MAX. TURNING LENGTH: 80″ DISTANCE BETWEEN CENTERS: 91″ SPINDLE SPEEDS: 500 RP...

SPINDLE QUANTITY: 3 TRAVEL: 300MM MOTOR: 11 HP MAX DRILL DIAMETER: 40MM RAPID ADVANCE AND RETRACT: 20FPM MAX FEED RATE: 12IPM DRILL HOLDER: NO. 4 ...

10′ X 45′ KOIKE ARONSON VERSAGRAPH CNC PLASMA, 2004 – 2 PROLINE 2200 INNERLOGIC POWER SOURCES, HYPERTHERM EDGE PRO CONTROLLER CUTTING AREA: 10′ X...

TABLE DIMENSIONS: 48.03″ X 25.20″ MAXIMUM LOAD ON TABLE: 1,760 LBS. TRAVEL: (X) 40.16″, (Y) 25″, (Z) 20.47″ TABLE TOP TO SPINDLE NOSE: 7.87” – 28....

HITACHI SEIKI HT20 SIII CNC LATHE SN HTS3210HL SWING: 15" MACHINING LENGTH: 15" CHUCK SIZE: 8" BAR CAPACITY: 2" POWER: 25 HP MAX RPM: 5,000 RPM TU...

SUNNEN MBB-1660 PRECISION HONING MACHINE SOLD WITH CABINET OF ACCESSORIES SN 83040 HTTPS://WWW.SUNNEN.COM/USERFILES/RESOURCES/BROCHURES/MBB-1660.P...

CLAUSING 1673 DRILL PRESS SN 528443 Item Location - Plymouth, WI ...[more]

TWINHORN VH-1010 VMC VERTICAL MACHINING CENTER SN V1111164 DATE 2012/01 X-AXIS: 39.76" Y-AXIS: 19.7" Z-AXIS: 20.47" TABLE SIZE: 47.24" X 17.71" SP...

MYFORD MG12 CYLINDRICAL GRINDING MACHINE; WITH SHELF OF ACCESSORIES Item Location - Plymouth, WI ...[more]

MSC MANUAL KNEE MILL WITH DRO; TOOLING; POWER DRAWBAR, ACCESSORIES SN 450137 DATE 95/01 Item Location - Plymouth, WI ...[more]

TWINHORN VH 650 CNC VMC VERTICAL MACHINING CENTER SN V1101018 SHIP DATE 2011/05 TABLE SIZE L X W (IN.): 31.500(L) X 17.720(W) MAX WORKPIECE WEIGHT...

KEARNEY AND TRECKER 3CSM HORIZONTAL MILL; WITH SHOWN TOOLING AND ACCESSORIES SN 25-7418 Item Location - Plymouth, WI ...[more]

1998 SOUTHWESTERN INDUSTRIES TRAK DPM 3 AXIS CNC VERTICAL BED MILL SN: 98.45.75 TABLE SIZE:50" X 10" X-AXIS TRAVEL:31" Y-AXIS TRAVEL:17" Z-AXIS TR...

KITAMURA CNC MACHINING CENTER MYCENTER-2X SN 03072 MAX SPINDLE SPEED 10000 RPM 200/220V 3 PHASE 50/60HZ NUMBER OF PALLETS: 2 X-AXIS TRAVEL: 20" Y-...

2015 TWINHORN VH-1010 VMC VERTICAL MACHINING CENTER SN V1502014 2015/02 X-AXIS: 39.76" Y-AXIS: 19.7" Z-AXIS: 20.47" TABLE SIZE: 47.24" X 17.71" SP...

MILLING MACHINE SETUP HARDWARE Item Location - Plymouth, WI ...[more]

SET OF BROWNE AND SHARP RUBBER FLEX COLLETS FOR SCREW MACHINES WITH 3/4" SPINDLE CAPACITY Item Location - Plymouth, WI ...[more]

MONARCH 20" X 72" FLAT BED ENGINE LATHE CATALOGUE SIZE 20" MFR'S SN 39357 ACTUAL SWING 22.5" DISTANCE BETWEEN CENTERS 72" DATE 12/1953 LATHE IS SO...

GRIZZLY 15"X50" TOOL ROOM LATHE G9733 SWING OVER BED: 15" SWING OVER GAP: 24" SWING OVER CROSS SLIDE: 9-1/2" DISTANCE BETWEEN CENTERS: 50" SPINDLE...

40,000 HIGH SPEED SPINDLE "AIR TURBINE TOOLS" Item Location - Plymouth, WI ...[more]

ISCAR THREAD MILL CUTTERS INSERTS 26 COUNT Item Location - Plymouth, WI ...[more]

ARGLO ELECTRIC ENGRAVER SYSTEMS, (1) MODEL ARKOTRAFO A 50/32, (1) MODEL ARKOTRAFO A 25/3 Item Location - Orleans, Nebraska ...[more]

BRIDGEPORT SERIES I VERTICAL MILLING MACHINE, R8 COLLET SPINDLE, 5" SPINDLE STROKE, 60-4200 SPINDLE RPM, 48" X 9" T-SLOTTED TABLE WITH SERVO TYPE ...

HAAS MODEL VF2B CNC VERTICAL MILLING MACHINE, S/N 25121, YEAR 2001, 11,623 POWER HOURS, 3,883 CUTTING HOURS, CAT 40 TAPER SPINDLE, 20-STATION TOOL...

FADAL MODEL VMC3016 CNC VERTICAL MILLING MACHINE, S/N 012000091239, YEAR 2000, 9,141 RUNNING HOURS, CAT 40 TAPER SPINDLE, 21-STATION TOOL CAROUSEL...

TSUDAKOMA MODEL TN-100 ROTARY/TILT CNC 5TH AXIS, S/N 052170, 6" 6-JAW CHUCK, (2) TSUDAKOMA TPC JR CONTROLLERS, TAIL STOCK, (MOUNTED IN LOT 98) It...

MORI SEIKI MODEL SL-253 CNC LATHE, S/N 2014, YEAR 2000, 10,465 CUTTING HOURS, KITAGAWAB-210 10" 3-JAW CHUCK, 3500 CHUCK RPM, 3" HOLE THRU SPINDLE,...

MORI SEIKI MODEL SL-25B CNC LATHE, S/N 6384, YEAR LATE 1990'S, 3,648 CUTTING HOURS, AUTOSTRONG N-210 10" 3-JAW CHUCK, 4,200 CHUCK RPM, 3" HOLE THR...

ASSORTED LATHE CENTERS, (3) NO. 3, (1) MT4, (3) NO. 4 Item Location - Orleans, Nebraska ...[more]

HAAS 4TH AXIS INDEXING HEAD, S/N S500746, WITH SERVO CONTROLLER & TAIL STOCK Item Location - Orleans, Nebraska ...[more]