Lot

1298

This auction is live! You need to be registered and approved to bid at this auction.
You have been outbid. For the best chance of winning, increase your maximum bid.
Your bid or registration is pending approval with the auctioneer. Please check your email account for more details.
Unfortunately, your registration has been declined by the auctioneer. You can contact the auctioneer on 818 495-3038 for more information.
You are the current highest bidder! To be sure to win, come back on as the lot closes or increase your max bid.
Leave a bid now! Your registration has been successful.
Sorry, bidding has ended on this item. We have thousands of new lots everyday, start a new search.
Bidding on this auction has not started. Please register now so you are approved to bid when auction starts.
1/18
Wafer Oven - Image 1 of 18
Wafer Oven - Image 2 of 18
Wafer Oven - Image 3 of 18
Wafer Oven - Image 4 of 18
Wafer Oven - Image 5 of 18
Wafer Oven - Image 6 of 18
Wafer Oven - Image 7 of 18
Wafer Oven - Image 8 of 18
Wafer Oven - Image 9 of 18
Wafer Oven - Image 10 of 18
Wafer Oven - Image 11 of 18
Wafer Oven - Image 12 of 18
Wafer Oven - Image 13 of 18
Wafer Oven - Image 14 of 18
Wafer Oven - Image 15 of 18
Wafer Oven - Image 16 of 18
Wafer Oven - Image 17 of 18
Wafer Oven - Image 18 of 18
Wafer Oven - Image 1 of 18
Wafer Oven - Image 2 of 18
Wafer Oven - Image 3 of 18
Wafer Oven - Image 4 of 18
Wafer Oven - Image 5 of 18
Wafer Oven - Image 6 of 18
Wafer Oven - Image 7 of 18
Wafer Oven - Image 8 of 18
Wafer Oven - Image 9 of 18
Wafer Oven - Image 10 of 18
Wafer Oven - Image 11 of 18
Wafer Oven - Image 12 of 18
Wafer Oven - Image 13 of 18
Wafer Oven - Image 14 of 18
Wafer Oven - Image 15 of 18
Wafer Oven - Image 16 of 18
Wafer Oven - Image 17 of 18
Wafer Oven - Image 18 of 18
Auctioneer has chosen not to publish the price of this lot
Azusa, California
0,00%
18,00%
1-Used  Model KHG-75 Gas Oven

The baking oven is the most important machine in the whole wafer production line. The oven is in wholly frame structure, which supplies enough support. Its mechanical drive system adopts baking tongs with hinges, which runs on the rails inside the oven and baking plates are installed in the baking tongs. The speed of tong carriage is controlled by the frequency converter, the batter deposit system is batch-type, and the wafer baking system uses LPG for heating of the baking plates. The functions of the baking oven is fully automatic from spreading batter on the plates through until baked wafer sheets come out of the oven. Bake the wafer sheets evenly and produces good quality wafer sheets for next procedure. In PLC there is a PID controller which is used for controlling the temperature of the baking plates automatically. The collection of required signal of PID is supplied by an infrared sensor. The oven status display and the data reset are supplied by a touch screen. All motors have the starting current protection and thermal overload protection. There’re ventilation door.
The gas accessories meet the standard of FM approval, and there’s one alarm if the gas leaking. There’re two ways of temperature controlling: one for testing the baking plates, another for testing the baking chamber, both of them can be showed of the touch panel and you just need to choose one. They’re sealed by silica gel.
There are two set of centrifugal fan on the top of oven for exhaust gas.

AC contactor is supplied by SCHENEIDER.
The stepping wheel bearings of the mould rack are supplied by SKF.
The pressing roller bearings are supplied by SKF.
Main Pneumatic components are supplied by FESTO.
The main drive reducing motor is supplied by SEW, in the front of baking oven with waste withdraw ahead and automatic tightening. Oven track is of 45#heat treatment, size 25X25.
The top of electrical cabinet is inclined 45 º, plus four ?65 round leg (heigh 400 ). There’re data box, explosion-proof lamp, 2-3 socket, circuit diagram in side.
Supplies two sets of batter pump and batter pipe.
Batter pump is rotor type of NISSINbrand.
PLC isSIEMENS300; Transducer isSIEMENS; 10 inch color screen touch screen; SCHENEIDERcontactor; trunking galvanized; Photo-electricity is supplied by SICK.
There is an automatic spurring-cleaned device at the bottom of the baking oven.
There is second pressure relief valve.
The floating system is stainless steel ball type.
The pressing system, opening system and tension system are improved about the heat-treatment. The main bolts are screws are 8.8 or 12.6 grade.
There is a safety cover for batter inductive switch.
There are safety windows at both sides of the baking oven.
The connecting system is “three-leaf” type.
All the belt rollers of the whole line are made from aluminium alloy.
All of motors, electric wire, and cable protection pipes accord with the UL standard.
The motors have the UL certificate, and the electric wire would be not visible.
The doors of electric cabinet can be opened only in case of the main power had cut off.
All weld is solderless joint.
Oil paint have not the lead.
All the doors are watertight doors.
Button Label use English.
Main technical parameter:

  • Total quantity of GAS heated Baking Plates: 75pairs.
  • Baking Plate Size: 470mm x 325mm
  • Pattern of the wafer sheet: 2.5×2.5×0.5 (Standard), should be confirmed during one month after this contract signed, or the Seller has right to delay the delivery date.
  • Wafer sheet weight: 50-65g
  • Output: Up to 38 Sheets /min.
  • LPG consumption: 20m³ / hour max.
  • LNG consumption: 60m³ / hour max.
  • Compressed air consumption: 0.2m³/min /0.8Mpa. Pressure

Skidding and Load out charges:There will be loading and skidding charges added to your purchase at market rates for your convenience.
Location: El Monte, CA

1-Used  Model KHG-75 Gas Oven

The baking oven is the most important machine in the whole wafer production line. The oven is in wholly frame structure, which supplies enough support. Its mechanical drive system adopts baking tongs with hinges, which runs on the rails inside the oven and baking plates are installed in the baking tongs. The speed of tong carriage is controlled by the frequency converter, the batter deposit system is batch-type, and the wafer baking system uses LPG for heating of the baking plates. The functions of the baking oven is fully automatic from spreading batter on the plates through until baked wafer sheets come out of the oven. Bake the wafer sheets evenly and produces good quality wafer sheets for next procedure. In PLC there is a PID controller which is used for controlling the temperature of the baking plates automatically. The collection of required signal of PID is supplied by an infrared sensor. The oven status display and the data reset are supplied by a touch screen. All motors have the starting current protection and thermal overload protection. There’re ventilation door.
The gas accessories meet the standard of FM approval, and there’s one alarm if the gas leaking. There’re two ways of temperature controlling: one for testing the baking plates, another for testing the baking chamber, both of them can be showed of the touch panel and you just need to choose one. They’re sealed by silica gel.
There are two set of centrifugal fan on the top of oven for exhaust gas.

AC contactor is supplied by SCHENEIDER.
The stepping wheel bearings of the mould rack are supplied by SKF.
The pressing roller bearings are supplied by SKF.
Main Pneumatic components are supplied by FESTO.
The main drive reducing motor is supplied by SEW, in the front of baking oven with waste withdraw ahead and automatic tightening. Oven track is of 45#heat treatment, size 25X25.
The top of electrical cabinet is inclined 45 º, plus four ?65 round leg (heigh 400 ). There’re data box, explosion-proof lamp, 2-3 socket, circuit diagram in side.
Supplies two sets of batter pump and batter pipe.
Batter pump is rotor type of NISSINbrand.
PLC isSIEMENS300; Transducer isSIEMENS; 10 inch color screen touch screen; SCHENEIDERcontactor; trunking galvanized; Photo-electricity is supplied by SICK.
There is an automatic spurring-cleaned device at the bottom of the baking oven.
There is second pressure relief valve.
The floating system is stainless steel ball type.
The pressing system, opening system and tension system are improved about the heat-treatment. The main bolts are screws are 8.8 or 12.6 grade.
There is a safety cover for batter inductive switch.
There are safety windows at both sides of the baking oven.
The connecting system is “three-leaf” type.
All the belt rollers of the whole line are made from aluminium alloy.
All of motors, electric wire, and cable protection pipes accord with the UL standard.
The motors have the UL certificate, and the electric wire would be not visible.
The doors of electric cabinet can be opened only in case of the main power had cut off.
All weld is solderless joint.
Oil paint have not the lead.
All the doors are watertight doors.
Button Label use English.
Main technical parameter:

  • Total quantity of GAS heated Baking Plates: 75pairs.
  • Baking Plate Size: 470mm x 325mm
  • Pattern of the wafer sheet: 2.5×2.5×0.5 (Standard), should be confirmed during one month after this contract signed, or the Seller has right to delay the delivery date.
  • Wafer sheet weight: 50-65g
  • Output: Up to 38 Sheets /min.
  • LPG consumption: 20m³ / hour max.
  • LNG consumption: 60m³ / hour max.
  • Compressed air consumption: 0.2m³/min /0.8Mpa. Pressure

Skidding and Load out charges:There will be loading and skidding charges added to your purchase at market rates for your convenience.
Location: El Monte, CA

Food Processing Packaging Auction

Se termine à partir de
Lieu de la vente
Online Only (MULTIPLE LOCATIONS)
California
Tennessee
New Jersey
Washington
California
MULTIPLE LOCATIONS
United States

General delivery information available from the auctioneer

Skidding and Load out charges:
There will be loading and skidding charges added to your purchase at market rates for your convenience.

Importantes Informations

Food Processing Packaging Auction

Auction Date: lots start closing on Thursday, September 12, 2019 at 10:00 am PST

 

18% Buyers Premium applies on all online purchases.

 

 

BidSpotter Customer Service Support Department 

Have a question pertaining to the bidding process? 

Visit our Frequently Asked Questions!  

You can also start a live chat with a Bidspotter Support Representative by selecting Live Chat at the top of Bidspotter.com. More information on our chat system can be found by clicking here. 

Customer Support Hours:

  • Monday – Thursday, 8:00 AM EST – 10:00 PM EST
  • Friday, 8:00 AM EST – 6:30 PM EST 

Email: support@bidspotter.com

Office: (253) 858-6777      Toll Free: (866) 597-2437

Frequently Asked Questions

Conditions Générales de Ventes

Terms of Sale Agreement:
SELLER RESERVES THE RIGHT TO ACCEPT OR REJECT ANY AND ALL BIDS


1. Only Checks, Wire Transfers or Cashiers Checks payable to Chris Hillseth Enterprises will be accepted for payment. No equipment will be removed from the sale site until payment is received by Chris Hillseth Enterprises. NO EXCEPTIONS! 

2. While descriptions are believed to be correct, the sellers agent or the owners make no warranties or guarantees expressed or implied, as to the genuineness, authenticity of, or defect in any lot and will not be held responsible for advertising discrepancies or inaccuracies. Everything sold AS IS and WHERE IS except as expressly made in writing. No warranties are made as to the merchantability of any items or their fitness for any purpose.

3. International bidders (outside of the United States) require a $10,000 earnest-money deposit. This is non-negotiable and accounts for 5% to 10% of the purchase price (depending on the total gross dollar amount of the winning bid(s) of the purchase. Not including taxes). This money is held by the seller's broker to be used as a credit toward the down payment and closing costs.

 

If no items has been purchased the entire earnest-money deposited amount will be returned to the original depositor in the same means it was received



4. Purchaser hereby agrees to defend, indemnify and hold harmless Seller its directors, officers, employees and other agents and representatives from and against any and all liabilities, judgments, claims, settlements, losses, damages, penalties, obligations and expenses, including attorney`s fees and expenses and other professional fees and expenses, incurred or suffered by such person arising from, by reason of, or in connection with any loss, damage or injury to person or property arising from, by reason of or in connection with the Goods sold hereunder. This indemnification shall survive delivery of the Goods to Purchaser and any subsequent sale or other transfer of the Goods to a third party.

5. It is the buyers’ responsibility to secure all safety equipment to meet all applicable government safety standards in using or removing items purchased.

 

6. Sales Tax will be added to the purchase of all taxable items. Dealers who purchase for resale must file their resale permit numbers. If sales tax is not collected at the time of sale and is deemed “needed to be paid” at a later date, buyer agrees to pay all required taxes.

7. Purchaser does hereby indemnify and hold harmless auctioneer and seller from any and all damages, claims or liabilities from injuries to persons or property of any type whatsoever caused during the sale or by the removal of items purchased.

8. Sellers agent and Seller shall have no liability to the purchaser due to non-delivery of any item for any reason other than to return to the Purchaser the monies deposited for non-delivered items.

9. In the event the purchaser fails to pay the whole of the purchase within the time set forth by the auctioneers and/or fails to comply with any of the conditions or terms of sale, the seller may retain and/or recover the deposit specified as liquidated damages and, in addition thereto, items that are not paid for can be resold at public or private sale without further notice. Any deficiency resulting from such resale shall be paid to the auctioneers by the defaulting purchaser together with all charges, fees, and expenses incurred by such resale and enforcement of the obligation hereunder.

10. The Bidder becomes solely responsible for all items purchased by him immediately following his winning bid at the auction. Therefore, he is advised to further guard and insure his items at his own discretion.

11. No item can, on any account, be removed before buyer receives payment in full. Removal shall be at the expense, risk and liability of the purchaser. Auctioneers shall not be responsible for items not removed within the time allowed. If equipment is not removed within specified removal time, purchaser shall be liable for any moving and storage costs incurred and, if not so removed, the items shall be deemed abandoned.


12. If any shortage exists on estimated counts, an adjustment will be made if claims are made at time of removal. No adjustment will be allowed after items are removed from the premises.

13. If any dispute arises between two or more bidders, the sellers’ agent may or may not put the lot up again at once, and resell. 

14. The sellers’ agent, when acting as agent only, is not responsible for acts of its principals.

15. A 18% Buyers premium will be applied to all sales in Addition to Applicable Local and State Sales Tax. 

16. By accepting a sale listing catalog and signing this form the buyer agrees to these terms and any announced terms at the sale.

17.You will receive notifications from us regarding your purchases.

18. Seller reserves the right to accept or reject any and all bids.

19. All Bills must be completed on Day of Sale unless arrangements are made with Auction House prior to bidding.

20.Full Payment at Termination of Sale.


21. A 3% fee will be applied to all CC orders.

22. Skidding and Load out charges: There will be loading and skidding charges added to your purchase at market rates. 

Inspection date (day only) is:  

May 10-15

By Appointment Only. Call 818 495 3038 to Schedule.

 

Inspection locations:

Various Locations, call for specific item.

Inspection by appointment only. Call / email Randy Aguilar at 818 495 3038 / randy@hillseth.com or  Patrick Hillseth at 818 495/3038  patrick@chrishillsethenterprises.com

See Full Terms And Conditions