HENDEY 12" METAL SHAPER, 60" X 47" X 58", 2,800-LBS., VISE AND ANGLE HEAD [LOCATED IN BIRMINGHAM, OH, CONTACT FRED OR HENRY 440-965-4051]

HARNISCHFEGER, P 7 H WELDING DIVISION MODEL DAR-300HFGW, P 7 H TIG WELDER, S/N E3258806 919580, FOOT PEDAL, AIR COOLED TIG TORCH, POWER, GAS, AND ...

HOBART MODEL RC-250, MIG WELDER, S/N 80WS07462 (1975), MIG TORCH, GROUND CLAMP, 300 LBS, WELDER IS HARD WIRED INTO THE BOX. EASILY REMOVED WITH FL...

TENNANT MODEL 480, SWEEPER SCRUBBER, S/N N.A., 110-VOLT BATTERY CHARGER, 500-LBS. [LOADING FEE $50] [LOCATED IN MT. MORRIS, MI, CONTACT DAN 517-97...

POWERMATIC MODEL 87, VERTICAL BAND SAW, S/N 587007, 600-LBS. [LOADING FEE $50] [LOCATED IN MT. MORRIS, MI, CONTACT DAN 517-977-8704]

BRIDGEPORT MODEL ROUND RAM M HEAD, 9" X 42" VERTICAL MILL, S/N N.A., (WILL SUPPLY SOME END MILLS WITH MACHINE) 2,000-LBS., "M" HEAD WAS JUST REBUI...

UNKNOWN NAME MODEL N.A., 6-PIECE STORAGE UNITS, EACH WITH 24 SPACES, S/N N.A., 96" LONG X 24" WIDE X 44" TALL, 5000-LBS. EACH, CUBE DIMENSION: 15"...

UNKNOWN NAME MODEL N.A., 6-PIECE STORAGE UNITS, EACH WITH 32 SPACES, S/N N.A., 500-LBS. EACH, EACH CUBE DIMENSION" 11' WIDE X 9" TALL X 23" DEEP, ...

STANLEY-VIDMAR MODEL N.A., 7-DRAWER TOOL CABINET ON WHEELS, 30" WIDE X 28" DEEP X 50" TALL, S/N N.A., 350-LBS., [LOADING FEE $25] [LOCATED IN TEMP...

ELLIS MODEL UNKNOWN, INDEXING DIVIDER HEAD MACHINIST TOOL, S/N N.A., 6" CHUCK AND SINGLE PLATE HAS 6 ROWS TAIL STOCK [LOCATED IN TEMPE, AZ, CONTAC...

DAYTON MODEL 9N100B, ELECTRIC 1-TON HOIST, S/N PR605834B, 120-LBS., 230/460 V, WIRED FOR 460V, 10' CHAIN, 8 FPM [LOCATED IN TEMPE, AZ, CONTACT PHI...

FOD BUSTER MODEL R548, PULL BEHIND SWEEPER, S/N N.A., 500-LBS., [LOADING FEE $25] [LOCATED IN TEMPE, AZ, CONTACT PHIL 480-986-2453] ...[more]

TAYLOR WINFIELD MODEL ERE-18-150, AIR OPERATED PRESS TYPE SPOT WELDER, S/N 72354-B, 3,000-LBS., 460V, 150KVS, 60 CYCLE, SINGLE PHASE MICROPROCESSO...

1-LELAND-GIFFORD MODEL NO. 2-LVS, VARISPEED FLOOR TYPE DRILL, S/N 2V-1526-205 (1968), 700-LBS., 230/460/3/60, 6.2/3 AMPS [LOADING FEE $25] [LOCATE...

KINEFAC MODEL MC-6, KIN-ROLLER, S/N 113, 84" X 54" X 80", 3000-LBS., 230/460 V, 40 AMPS, 60 CYCLES [LOADING $25] [LOCATED IN TEMPE, AZ, CONTACT PH...

DENISON MODEL HA15C99D01A46A127A68, 15-TON HYDRAULIC PRESS, S/N 1204-28769B-P9, 5,000-LBS., 240/480V, 3-PHASE, 38/19 AMPS [LOADING FEE $25] [LOCAT...

AIDA MODEL PC-5, (2), 55-TON PUNCH PRESS, S/N N.A., 900-LBS., 70-STROKES PER MINUTE, STROKE 5.9", 480V, 3-PHASE, 60 HZ, [LOCATED IN TEMPE, AZ, CON...

AIDA MODEL PPI-GC30, 30-TON PUNCH PRESS WITH LIGHT CURTAIN, S/N NA.A., 30" WIDE X 45" DEEP X 80" TALL, 5500-LBS.. 70 STROKES PER MINUTE, 24" X 17"...

WILLIAM WHITE & CO. MODEL 50-TON CAPACITY HYDRAULIC HORIAONTAL PRESS WITH INDEXER, S/N C-2977, 19' X 7' X 8', 12,000-LBS., 440V, 60 CYCLE [LOCATED...

EATON LEONARD MODEL VBCE5D, TUBE BENDING MACHINE, S/N VBH50-34-GRV, 115" X 32" X 62", 900-LBS., 110 V [LOADING FEE $25] [LOCATED IN TEMPE, AZ, CON...

EATON LEONARD MODEL VECTORBEND, TUBE BENDING MACHINE, S/ N VB75-5, 180" X 48" X 76", 1600-LBS., 230/460V, 32/16 AMP, 60 CYCLE, [LOADING FEE $25] [...

EATON LEONARD MODEL VECTORBEND, TUBE BENDING MACHINE, S/ N VB73-21, 180" X 48" X 64", 2200-LBS., 440V, 60 CYCLE, [LOADING FE $25] [LOCATED IN TEMP...

ROLL UP DOOR 8' X 8' WITH TRACK (NEVER INSTALLED) (CAN REMOVED BY SELLER, AT NO COST] [LOCATED IN ROMULUS, MI, CONTACT KURT 734-326-3610] ...[mor...

MITUTOYO COORDINATE MEASURING MACHINE, S/N N.A. (1990), GRANITE PLATE SIZE 22" X 24", NO PROBE, GOOD CONDITION (CAN BE LOADED BY SELLER AT NO COST...

BLISS MODEL SE496X54, 300-TON STRAIGHT SIDE PRESS, S/N N.A., (1965), AIR CLUTCH, BED SIZE 96" X 54", STROKE 16", SHUT HEIGHT AT BOLSTER 32", BOLST...

HARDINGE MODEL HC, CHUCKING TURRET LATHE, S/N HC6769-T, 13" SWING X 14-1/2" CC, 2500-LBS. [LOCATED IN JACKSON, MI, CONTACT JIM 517-787-3100] ...[...

HARDINGE MODEL HSL, SPEED/POLISHING LATHE, S/N HSL5C-1494F, 300-LBS. [LOCATED IN JACKSON, MI, CONTACT JIM 517-787-3100]

HARDINGE MODEL HSL, SPEED/POLISHING LATHE, S/N HSL5C-6251T, 300-LBS. [LOCATED IN JACKSON, MI, CONTACT JIM 517-787-3100]

ACRA MODEL ATS-27, CHUCKING TURRET LATHE, S/N 8610704, 2500-LBS., 13" SWING X 14-1/2"CC [LOCATED IN JACKSON, MI, CONTACT JIM 517-787-3100]

LNS MODEL QUICK LOAD BAR FEEDER, S/N 19706-96, 4", 500-LBS., WITH HAND HELD OPERATOR STATION [LOCATED IN JACKSON, MI, CONTACT JIM 517-787-3100]

SMW SPACE SAVER MODEL 6.8, AUTO LOAD BAR FEEDER, S/N 6.8.562, 4', 5000-LBS. [LOCATED IN JACKSON, MI, CONTACT JIM 517-787-3100]

ULTRAMATIC MODEL PORTA3, PARTS TUMBLER, S/N 7891, 1,000-LBS. [LOCATED IN JACKSON, MI, CONTACT JIM 517-787-3100]

ACME MODEL C-2, AUTOMATIC BUFFING & DEBURRING MACHINE, S/N 24882 (1984), WITH THROUGH FEED, COOLANT [LOCATED IN WARREN, MI, CONTACT JOE 586-256-13...

PINES MODEL DYNA-CUT, AUTOMATIC TUBE CUT OFF MACHINE, S/N 33550-72176, WITH FEED UNIT [LOCATED IN WARREN, MI, CONTACT JOE 586-256-1331]

FOSDICK MODEL 1360, 13" X 5' ARM RADIAL ARM DRILL, S/N 19429, WITH 30" X 30" SUB TABLE [LOCATED IN HUNTSVILLE, AL, CONTACT HEATH 256-536-1319] .....

DOALL MODEL C410A JOB SELECTOR, HORIZONTAL HEAVY DUTY CUT OFF BAND SAW, S/N 485-921-22 (1992), 14" WIDE X 16" HIGH X, AUTO ADVACNED WITH 24" STROK...

ARMSTRONG-BLUM MARVEL MODEL 15 AB/PC, AUTOMATIC HORIZONTAL CUT OFF BAND SAW, S/N 152007007PCW (1990), 16" X 20" CAPACITY, 3-HP HYDRAULIC SYSTEM, 1...

CHEVALIER MODEL FSG 1020 AD, AUTOMATIC SURFACE GIRNDER, S/N 25109 (1986), 10" X 20" CAPACITY, INCREMENTAL DOWN FEED, COOLANT SYSTEM, WHEEL DRESSER...

WELTY WAY SEAR MODEL SLR 6018, HIGH SPEED FLYING SHEAR, 60" X 18-GAUGE, SLITTING BEADING 10,000-LBS., 60" UNCOILER [LOCATED IN HUNTSVILLE, AL, CON...

LEBLONDE MODEL 4025, HEAVY DUTY ENGINE LATHE, S/N 3NK863, 40" X 112", 25 CROSS OVER SLIDE, 600 RPM, 27-1/2", 4 JAW CHAUCK, 50-HP MAIN MOTOR, 3" SP...

OLOFSSON MODEL 1075, VERTICAL TURNING MACHINE, S/N 13877 (1999), 10" X AXIS TRAVEL SINGLE SPINDLE, CHIP CONVEYOR, COOLANT TANK, 13,000-LBS. 2-PIEC...