lathe

TOOLMEX/WAFUM 25" X 80" MODEL TUR630A TOOLROOM LATHE, S/N 50714, 1,400 SPINDLE RPM, INCH/MM THREADING, 5-1/2" HOLE THRU SPINDLE, WITH 12" 3-JAW CH...

TOOLMEX/POREBA 36/47"' X 80" MODEL TRP-93X2M HEAVY DUTY GAP BED LATHE, S/N 7402-06-08002-06, 47" SWING THRU GAP UNDER CHUCK, 900 SPINDLE RPM, INCH...

Geminis GHT G2-1000x4000 Hollow Spindle CNC Lathe w/12.5" Spindle Bore Fagor 8055T CNC Control, 39.4" Swing Over Bed, 26.8" Over Cross Slide, 157....

Geminis CNC 5 Plus 870 x 3000 CNC Hollow Spindle Lathe w/9.05" Spindle Bore Fagor 8055T CNC Control, 34.25" Swing Over Bed, 22.04" Over Cross Slid...

Geminis CNC 5 Plus 870 x 3000 CNC Hollow Spindle Lathe w/9.05" Spindle Bore Fagor 8055T CNC Control, 34.25" Swing Over Bed, 22.04" Over Cross Slid...

Geminis CNC 5 Plus 870 x 3000 CNC Hollow Spindle Lathe w/9.05" Spindle Bore Fagor 8055T CNC Control, 34.25" Swing Over Bed, 22.04" Over Cross Slid...

LATHE TOOL POST ACCESSORIES

(6) INDEXABLE LATHE TURNING TOOLS

(8) INDEXABLE LATHE TURNING TOOLS\

Diehl TL-41 Woodworking Hyd. Lathe, 2.25 Shaft, 40" Cut, (Good parts machine, no hyd tank or pump, did not run, bearings rough)( Located in McClur...

(8) INDEXABLE LATHE TURNING TOOLS\

(8) INDEXABLE LATHE TURNING TOOLS\

(8) INDEXABLE LATHE TURNING TOOLS\

(8) INDEXABLE LATHE TURNING TOOLS\

(7) INDEXABLE LATHE TURNING TOOLS

INDEXABLE LATHE TURNING TOOLS AND KNURLING TOOLS

(12) INDEXABLE LATHE TURNING TOOLS

LARGE QTY ASSORTED LATHE TOOLING

ASSORTED STEEL AND LATHE ACCESSORIES ON ONE SHELF AND ON WALL

LARGE QTY CHUCK JAWS AND ASSORTED LATHE ACCESSORIES UNDER TABLE

Dean Smith & Grace Parts Lathe

LOT - (4) BOXES OF TOOLING: REAMERS, END MILLS, LATHE TOOLS, DRILLS AND DRILL EXTENSIONS

Sliven Parts Lathe (Not Complete)

Dianichi F35 CNC Lathe 13.7" Swing, 23.6" Max Turning Length, Spindle Speeds to 3500 RPM, 12-Position Turret

Ryazan 1M63H Gap Bed Lathe 27.5? Swing Over Bed, 118? Between Centers, 13.78? Swing Over Carriage, 10 ? 1250 RPM, Taper Attachment, 4.13? Spindle ...

LOT - TURRET LATHE MACHINE ADAPTOR SLEEVE TOOL HOLDER SHANK REDUCERS

LOT - TAP HOLDERS, LATHE CENTERS, 5C EMERGENCY COLLET, ETC.

Pernik C13MB Lathe

Pernik Parts Lathe

Kuraki KH6-30 Lathe w Tool Post Grinder

2 Pallets Misc. Lathe Parts

2 Pallets Ryazan Spare Lathe Parts

2 Pallets Ryazan Spare Lathe Parts

Assorted lathe tooling

Meuser lathe, serial number M4L -8091,Functionality and appearance indicate wear. 56 inch swing, 13 foot center center, four jaw combination chuc...

Monarch lathe, model 16CY, serial number 38588, 16-inch swing, 54-inch between centers. 3 jaw chuck, power crossfeed, power longitudinal feed, 21-...

MIxed lot of lathe tooling

Tarnow model TUJ48 X2500, serial number 3823, geared lathe, 20 inch swing, 96 inch center to center, taper attachment, 3 jaw chuck condition unkno...

Craven lathe, model serial unavailable, 114 inch swing, 23 foot centers, 80 inch bed, width,(2) 60 inch four jaw combination chucks, two steady re...

LeBlond Standard lathe, serial NT1351, powered by Westinghouse motor, 50 hp 224/440 V three phase , 32 inch swing, 16 foot center center, (2) stea...

Froriep lathe, 86-inch swing, four-jaw chuck, single compound cross slide, 296-inch center to center. 1.6 -46 RPM. Includes extra transmission an...

Leblond NC Engine Lathe, Tape-Turn Heavy Duty 3320, SN TCNF-727-R-2538, Fanuc GE Siri OI-TC controller, 32 in swing over the bed, 22' c to c, rem...

American engine lathe, model unknown, serial number 781617/67. 40" swing over bed, 24" swing over carriage, 127" center to center. Apron Pre Selec...

Enco Toolroom Turret Lathe, Model LHT-42, S/N 694-473

Brown & Sharpe Turret Lathe, 6-Position Turret, 11SC Collet Chuck, S/N 540-0-274

Leblond 15" X 30" Toolroom Engine Lathe, 8" 3-Jaw Chuck, Tailstock, In./Metric Threading, SS to 1800 RPM, S/N NA

TWS 12" X 36" Engine Lathe, Model BL-1237S, 6" 3-Jaw Chuck, Tool Post, SS to 1480 RPM, Inch/Metric Threading, 1-1/2" Bore, S/N 2939

Hardinge Dovetail Toolroom Lathe, Model DU-59, 5c Collet Closer, Pneumatic Fixture, Mclean 4-Axis Control, S/N NA

Contents of Corner; Wood Rack w/ Lathe Jaws, (2) 2-Door Cabinets w/ Tooling, Plastic Totes, Etc. Nut & Bolt Parts Bin, (2) Sections of Shelving, &...

Removal: Will start Saturday June 7, 2025 from 7:30 AM to 5:00 PM no loading on Sunday.  Monday, June 9th, 2025 through Friday June 13th, 2025 7:3...

1" Acme-Gridley RAN Screw Machine, 4th Position Threading, Logan Style, Old Style P.O. & B.F., Acme Pump, 4-Way Conveyor, 1-1/2" Ring Gear, 1/16" ...

1" Acme-Gridley RA-6 Screw Machine, 5th Position Reaming, 4th Position Threading, Internal Pump, 4-Way Conveyor, 3 Ring Gear, S/N 70517

9/16" Acme-Gridley RA-66 Screw Machine, 3rd & 4th Position Threading, 5th Position Drill Thru (Reaming), 4-Way Conveyor, 2-1/2 Ring Gear, Internal...

(6) Pallets & Crates of AST Screw Machine Collets/ Bushings, Cams, Gears, Etc.

1-1/4" Acme-Gridley RA-6 Screw Machine, Spindle Stop Machine Running Brass Cross Holes In 3rd Position, 5th Position Reaming, 4th Position Threadi...

1-1/4" Acme-Gridley RA-6 Screw Machine, 3rd & 4th Position Threading, 5th Position Reaming, 4 Ring Gears, Acme Coolant Pump, 4-way Conveyor, S/N 7...

1-1/4" Acme-Gridley RA-6 Screw Machine, 5th Position Reaming, 4th Position Threading, Internal Coolant Pump, 4-Way Conveyor, 3 Ring Gear, S/N 7042...