LOT of (34) Reliance Metal aluminum sheets, 0.125 x 36" x 28.8", approx 12lbs/sheet, approx only [CONEX]

Steel Storage Box, Approx 8'x 30' x 8-1/2', with front and back vented dual doors, roof vents, plywood panels on wall, ceiling and floor, power ou...

LOT of (4) Fanuc production robot assembly, model S-5 Arc Mate, For parts /repair, 6-axis articulated, with (4) R model G-2 control cabinets, asso...

Shop Grinder / Sander Stand, with 1-1/2hp belt driven drive motor, on/off switch + (2) electrical enclosure [CONEX]

Steel Channels, approx (25) 1"x1" x3" x 30", slotted gray painted [CONEX]

Fanuc production robot, model S-5 Arc Mate, s/n R91865261, 6-Axis, articulated, light parts handling, with RG2 Controller, servo system, unit F-11...

Fanuc production robot, model S-5 Arc Mate, s/n R93865193, 6-Axis, articulated, light parts handling, with RG2 Controller, servo system, unit F-17...

Fanuc production robot, model S-5 Arc Mate, s/n R93865193, 6-Axis, articulated, light parts handling, with RG2 Controller, servo system, unit F-79...

Steel Storage Box, Approx 8'x 30' x 8-1/2', with front and back vented dual doors, roof vents, plywood panels on wall, ceiling and floor, power ou...

[Lot] Roller Ball Transfer Table and Gravity Roller Conveyor Assembly Parts, Steel and aluminum extrusion framings by Roach Conveyors, associated...

Equipment Rollers, HD, including (1) set of Hillman rollers, (1) push and swivel type as shown [CONEX] ...[more]

LOT of (2) Altergy hydrogen engine, model FCM5, on pallet as shown [CONEX]

Yellow Stone scaffolding members, model 60600099, 750lbs load capacity [CONEX]

Steel Storage Box, Approx 8'x 30' x 8-1/2', with front and back vented dual doors, roof vents, plywood panels on wall, ceiling and floor, power ou...

Pallet Rack, 3 Sections with (10) x 8' cross beams, (4) x 9' uprights, wood slat shelvings [CONEX]

LOT of (2) Alpha power supply equipment, model PN-3, Rainproof Type 3R, 120/240vac input/87/75/63 output 60hz, 031-103-XX(1-UPS), 2 compartments f...

Steel Storage Box, Approx 8'x 20' x 7-1/2', with front vented dual doors, d bar stop socket on (2) raised floor on approx 2" x 6", I-beam base sup...

Nacelle power supply /backup equipment, Compact unit, pole mounted, 32bit digital signal controller, approx 16" x 47" x 17", was rated for 2.5kw, ...

LOT of (3) LKM steel molding equipment components, model B903-23, B903-77, s/n 881269, Side Gate system mold base, spring ejector, with (2) skid o...

Dayton pressure fan blower, model 2C890, 10" fan wheel dia, 115v with AC tech SCM series drive control [CONEX]

Bike Rack Assembly + Miscellaneous Items, bolt on floor bike stand, water cooler, PVC curtain strips, slotted angle frames, PVC pipes [CONEX]

Power Back up Equipment System Cabinets, Including (1) FCE-5kw and (2) TPM power module components 125A/80VDC, with air cooling fan ductings on pu...

Power Back up Equipment System Cabinets, Fuel Tank Cabinet for 20kW Fuel Cell, Approx 37"x40"x72", with (3) Lincoln Composite Hydrogen tanks, mode...

LOT of (5) Fuel Storage Cabinets, approx 24" x 40" x 72", vented doors [CONEX]

LOT of (5) Fuel Storage Cabinets, approx 24" x 40" x 72", vented doors [CONEX]

Graco pressure tank, model 236149-series J06A, 5 gallons capacity stand alone spraying HVLP, to 100psi max, ASME rated, 30.5" x 65lbs, stainless, ...

Graco pressure tank, model 236149-series J06A, 5 gallons capacity stand alone spraying HVLP, to 100psi max, ASME rated, 30.5" x 65lbs, stainless, ...

Graco pressure tank, model 236149-series KO6A, 5 gallons capacity stand alone spraying HVLP, to 100psi max, ASME rated, 30.5" x 65lbs, stainless, ...

1 FC Engine unit, mounted on aluminum extrusion frame, battery, power battery cable / terminal, with voltage tap, damper control, stack load PCB c...

1FC Engine unit, 15 cell stacks, with associated PCB controls as shown [Production Area]

Reformer Unifier unit, s/n 48008, with catalyst reactor, Fenwal cat# 35-530501-003 ignition control, 12vdc, HGS-M controller, p/n 190--1-001-Rev B...

LOT of (96) Neon Control, Stainless Pressure Regulators, p/n 15-247B1-2AF7-LH--UM, 0-100psi [Warehouse Area]

LOT of (40) Copper Coils and Other Parts, including Reego brass fittings [Warehouse Area]

LOT of (80) FCE Engine Cabinet Drawer/Tray Slides [Warehouse Area]

LOT of PCB Control Boards, including voltage taps, FCE engine control processors, FET-Switches, DAC expansion boards, current sensors, among trher...

LOT of (3) Tank Hold Units, (1) with redundant valve manifold, associated hoses and fill /purge valve as shown, (2) not installed, bare units [Pro...

Benning power inverter, model Invertronic Modular, s/n BY2016-114, Pn 6140023088/type INVM-1-2-3-4, with backfeed control unit, bypass switch, 120...

LOT of (2) Methanol Reformers, 5kw fitted with tachometer speed control, thermocouple, 24v blower, distribution burner tube, control board p/n 109...

LOT of (2) Nokia base station, model Flexi WCDMA -BTS, FSMD system module, (4) ANT, TX/RX, [Back Inside Building]

LOT of (2) Nokia base station, model Flexi WCDMA -BTS, FSMD system module, (4) ANT, TX/RX, [Back Inside Building]

BIRC II Fuel Cell Recirculating Engine, model FPS-548, 4kw, 48vdc nominal output, 105A, Stanby power input @ 0.015kw, 48vdc, 0.3A, 40psig min, 150...

BIRC II Fuel Cell Recirculating Engine, model FPS-548, 4kw, 48vdc nominal output, 105A, Stanby power input @ 0.015kw, 48vdc, 0.3A, 40psig min, 150...

Hydraulic Scissor Lift Table, model H1784, s/n 14666, Lockable whell casters, foot control [Back Inside Building]

Hydraulic Scissor Lift Table, Lockable wheel casters, foot control [Back Inside Building]

Hydraulic Scissor Lift Table, Lockable wheel casters, foot control, stainless table top [Back Inside Building]

5kw FCE Cabinet, Multiple compartments, for hydrogen gas generator, methanol reformer and batteries, fitted with approx 7 gal yellow air tank, met...

5kw FCE Cabinet, Multiple compartments, for hydrogen gas generator, methanol reformer and (4) batteries, fitted with approx 7 gal yellow air tank,...

5kw FCE Cabinet, Multiple compartments, for hydrogen gas generator, methanol reformer and (4) batteries, fitted with approx 7 gal yellow air tank,...

5kw FCE Cabinet, Multiple compartments, for hydrogen gas generator, methanol reformer and (4) batteries, fitted with approx 7 gal yellow air tank,...

Integrated Power Back up Equipment Cabinet, Multiple compartments with drawer slide for FCE or TSM, foam insulated interior wall, vented/cooling f...

Integrated Power Cabinet, for 10kw BIRC II installation, insulated interior, pull out drawers with provision for heater assembly, approx 30" x 26"...

Fuell Cell Storage Cabinet with Composite Hydrogen Fuel Tanks, approx 40" x 25" x72" all weather enclosure, rated to be hot swappable or refillabl...

LOT of (2) Power Cabinet for 2.5kw and 1kw Engine, with built in fuel cabinet below @ 2.5kw + 12 hrs storage, approx 38" x 24" x 84", fitted with ...

Data Server Power System, Server cabinet fitted with Altergy FPS-5 and TPM power module, plus IT stuff including HP ethernet switches, Dell Powere...

LOT of (3) Hydrogen Fuel Tank Storage Cabinet, with Door latches, vent on doors, for (8) tanks, approx 25" x 40" x 72" [Production Area]

LOT of (3) Hydrogen Fuel Tank Storage Cabinet, with Door latches, vent on doors, for (8) tanks, approx 25" x 40" x 72" [Production Area]

LOT of (3) Hydrogen Fuel Tank Storage Cabinet, with Door latches, vent on doors, for (8) tanks, approx 25" x 40" x 72" [Back Inside Building]

LOT of (3) Hydrogen Fuel Tank Storage Cabinet, with Door latches, vent on doors, for (8) tanks, approx 25" x 40" x 72" [Back Inside Building]

LOT of (3) Hydrogen Fuel Tank Storage Cabinet, with Door latches, vent on doors, (1) with tank hold/straps for (8) approx 25" x 40" x 72" [Back In...

Hydrogen Fuel Cell Engine Cabinet Assembly and Parts, Including, (1) bare (2) 3 compartment, for 5kw BIRC II, plus (17) vented door enclosures, [B...