Balance Tank, stainless, approx 400 gallons capacity, 48"dia x 50" straight side, cone bottom, 16"x16" top MH, center bottom discharge with stainl...

Inspection Platform, stainless, 4 steps with safety rails [Line 4]

Hot Water Skid, includes (1) 12"dia x 5' insulated shell and tube HEX, rated for 150psi @ 375 deg F, 125psi @ 375 deg F, skid mounted with circula...

Centrifugal Pump, stainless, 2"x2", 7.5hp, 230/480v [Line 4]

Centrifugal Pump, stainless, 2"x2", 2hp, 230/480v [Line 4]

APV Plate HEX, model R56, s/n 79438, upgraded to AGC Proflow series with approx 78 stainless packed plates, approc 16"x64" [Line 4]

Endress+Hausser Flow Meter, with stainless flow tube and transmitter top mounted [Line 4]

Bag Filters, dual stainless vessel, with anderson gauges and (4) butterfly valves [Line 4]

Bag Filters, dual stainless vessel, with anderson gauges and (4) butterfly valves [Line 4]

Samson Steam Valve, diaphragm steam converting valve, air actuated, 2"x2" [Line 4] ...[more]

Centrifugal Pump, stainless approx 7.5hp, 1-1/2"x 2" [Line 4]

Solbern Liquid Filler, model LFF-103, cascade type straight line liquid filler, 2"wide feed lug chain conveyor, set currently for 5.5 oz. apple ju...

Holding Tubes, stainless, 12 pass, approx 3"x20'long per pass (valves are tag separately) [Line 4]

Angelus Can Seamer, model 120L, s/n 11004683, 12 seaming heads, steam flow, currently set for 202 size cans, currently runnning @ 700 cpm max, app...

Chartech Nitrogen Doser , model Ultra Doser Type Series , s/n W-00810, freestanding on stainless column support, rigid head, with  small headspace...

Fleetwood Roto Lid Feeder s/n 35826, currently use for size 202 cans with approx 50 stacks, @ approx 560 lids capacity/pockets, programmable contr...

ADR Closure monitor, model 50C, s/n 6057, self contained  in line universal closure monitor equipment, rated for 2" tot 6-1/4" dia, monitor low/hi...

Entech Fabrication Can Rinse/Inverter, stainless, set for 5.5 and 11.5oz size cans, with can twist feeder and inverter to Solbern filler [Line 4] ...

Inspection Platform, stainless and aluminum with (1) 10 steps caged access ladder, (1) with 7 steps [Line 4] ...[more]

PAC -RITE Evaporative Cooler s/n 11004683, stainless, approx 8'x 43-1/2"long, 11" high feed tunnel opening with (4) stainless water distribution/r...

I and H Accumulation Table, approx 8'x14-1/2' long with retractable can stop bar, modular belting, gear drives, control switch, stainless frame an...

Industrial Dynamics - Fil-Tec X-ray Level Detector, model FT-50, s/n 116902, high speed fill level inspection equipment, currently set for 5.5 and...

ADR Closure monitor, model 50C, s/n 6111, self contained in line universal closure monitor equipment, rated for 2" tot 6-1/4" dia, monitor low/hig...

Kayat Tray Packer, model TP50A, s/n TP50A-105,LH, currently set for 6x4 can set up, Nortdson 2302 hot melt glue system, blank carton magazine, 4 d...

Kayat Tray Stacker, model T1000, 2high case stacker, currently stack 5.5 oz, 24 cans trays [Line 4] ...[more]

Tri-Can Empty Can Depal, model 450-Depal, s/n TC8-3309, high level bulk can depalletizer, approx  11'high pallet elevator, various parts and compo...

SWF Case Former, model TF400V, s/n SWF10376, Tray-Matic tray former, with Nordson Pro-Blue hot melt glue machine fitted with EPC30 pattern control...

SWF Case Former, model TF400V, s/n 050522-1, Tray-Matic tray former, with Nordson Pro-Blue hot melt glue machine fitted with EPC30 pattern control...

SWF Case Former, model BL-400VK, s/n 050521-02, Bliss -Matic case former with Nordson Pro Blue hot melt glue machine fitted with EPC30 pattern con...

SWF Case Erector, model CL-451, s/n 050523-01, high speed case erector, with high capacity power blank carton hopper, fold/seal bottom flaps, RSC/...

SWF Case Former, model BF-400VK, s/n 050521-01, Bliss -Matic case former with Nordson Pro Blue hot melt glue machine fitted with EPC30 pattern con...

Bevco Bottle Laner, model M1-8L, s/n J15387,5.7kva, 460v, 3ph/60hz, 120vac control, with control panel, gear drive, stainless frame supports. Pneu...

Bevco Bottle Laner, model SER1, s/n J21162A, 51.5hp,  51.5hp, 480v/460v, 3ph/60hz, 120vac control, with control panel, 3R enclosure, AB PanelView ...

Standard Knapp Drop Case Packer, type 935-LH, s/n 530, type 935-LH, s/n 530, with 4 adjustable lane divider/grouper, rated @ approx 30cpm, dependi...

Bevco Bottle Laner, 5.7kva, 460v, 3ph/60hz, 120vac control, with control panel, gear drive, stainless frame supports. Pneumatic switching, approx ...

Standard Knapp Drop Case Packer, type 935, s/n 935-3B-174,  with 4 adjustable lane divider/grouper, rated @ approx 30cpm, depending on product siz...

Robert PolyPro Bottle Carrier Applicator, model 2163, s/n 2163000X-1/2163, currently set for 6 pack, 60oz bottles, with feed conveyor, approx 12"x...

Robert PolyPro Bottle Carrier Applicator, model 2163, s/n 2163000X-2/2163, curently set for 6 pack, 60oz bottles, with feed conveyor, approx 12"x4...

Elliot Case Taper , model HMT-MINI-T, s/n 06-1106, auto top apply glue or tape case sealer, with with approx 14"x11' long v-belted feed conveyor, ...

Solbern Liquid Filler, mod LFF 103, s/n 2508, with 50 travelling funnels/spouts, previously used for 6 oz @ 1000 cpm, 12 oz@ 900 cpm and 46 oz @ ...

Fristam Centrifugal Pump, mod FPX3451-250, s/n SPX#4510301195, stainless, 5 hp/1750 rpm, 230/460 v

Tri Clover Centrifugal Pump, stainless, approx 3 hp

Inline Magnetic Trap, stainless, approx 8" dia

American Felt and Filter, s/n 1160-20, stainless, 150 psi@ 450d eg F , -20 deg F @ 120 psi, approx 8" dia x 15" straight side on stainless frame s...

Angelus Can Seamer, mod 60L, s/n 7398869, 8 seaming stations, previously use for 46 oz can products @ approx 175 to 500 cpm, min / max can size @ ...

[LOT] Discharge /Feed Conveyors, (1) dual belt mass flow feed conveyor, approx 8"wide belt x 2 x 28' long 2 hp/1720 rpm to spray cooler and (1) 8"...

I and H Conveying and Machine Co. Spray Washer, s/n 9577, approx 8' w x 48 'L, stainless clad with (5) 2 hp /3450 rpm, 200-230/460 v recirculating...

[LOT] I and H Conveying and Machine Co. Discharge /Feed Conveyors, (1) dual belt mass flow discharge x 14' long with (1) 90 deg turn, (1) 8" wide...

Accumulation Conveyor, approx 8' wide x 12' long with 3/4 hp/1725 rpm drive motor, 208-230/460 v, 3 ph/60 hz, stainless clad, with sweep bar, intr...

Feed Conveyor, approx 8" wide x 30' long feed to labeler with 1/2 hp drive motor, stainless frame and support

[LOT] Air Blast Inc Air Knives / Belt Wiper System, mod 37-18-7.5, s/n 2532-92, system includes (1) 7.5 hp/3450 rpm, 208-230/460 v fan blower, (1)...

Krones Labeler, mod Canmatic, s/n 73-D55, wrap around, pre cut, previously used for 46 oz container, with 12 stations container labelling table, a...

Food Instrument Corp Universal Closure Monitor, mod ADR-50C, s/n 5924, 200-240, 1 ph/60hz with angled reference strip, rated to 800 cpm @ high sp...

Filtec / Industrial Dynamics Dud Detector /Level Inspector, mod FT-50, s/n 110239, previously used to inspect underfill/overfill level of 46 oz p...

[LOT] Columbia and Welliver Discharge /Feed Conveyors, including (1) dual belt x 8" wide x approx 7' long with directional guide, (4) 8" wide 90 ...

Fiberboard Pak-Master Case Packer, mod PM-II, wrap around type, with right angle universal product infeed model SECT-120, s/n 2-101, approx 14" ...

Interlake and Ermanco Full Case Transfer Conveyor System, system includes, approx 16" wide live roller with 90 deg turn and V-belt take away full ...

Feed Conveyor, V- belted conveyor @ 16" wide x 3' long to live roller @ 16" wide x 20' long with 45 deg turn, 3/4 hp drive motor, (NOTE: Lot termi...

Stainless Tank, approx 4' dia x 4' high with hinged lift up lid cover, center bottom discharge, cone bottom, stainless legs

Fristam Centrifugal Pump, mod FPX3451-250, stainless, approx 7.5 hp