Unused 300 ton Trane chiller, model CVHE400, type CVHE040KA4XWRSNLS5568B6MCA0000000RD1OOGOLSW0003C100B, water cooled, 3 stage compressor, R123 ref...

Line Control Panel with 400A, 3 phase breaker ...[more]

Heavy Duty Metal Cutting Band Saw, 40" deep throat, 5HP/208-230/440v ...[more]

inclined belt conveyor, 48" wide x 360" long smooth belt, driven by 3 hp, 230/460 volt.***Loading Fee $250.00*** 

Roach smooth belt conveyor, 36" wide x 288" long, driven by 2 hp, 230/460 volt motor, serial# 472568-1.***Loading Fee $100.00***

W.E.S box dumper, 50" wide x 42" deep x 54" high, hydraulic actuation, on 72" high carbon steel frame. ...[more]

Roach belt conveyor, 60" wide x 360" long, driven by 2 hp, 230/460 volt motor, serial# 472569.***Loading Fee $100.00***

 48" x 48" x 44" Deep Carbon Steel Hopper on wheels ...[more]

cleated belt conveyor, 36" wide x 246" long, with gearbox less motor.***Loading Fee $150.00***

Meber band saw, approximately 24" cutting area, approximately 2 hp drive. ...[more]

 28" wide x 19' long smooth belt conveyor, no motor ...[more]

Hydracolor Volumetric Blender/Feeder, Model MM-300-3, carbon steel construction, 3 material design, with drives and controls, 10'6" overall height...

 Hapman Pneumatic Loader, stainless steel construction with blower, mounted on approximately 55 cu. ft. stainless steel hopper, 4' X 4' X 3" strai...

Toyota hand truck with Battery Handling Systems (BHS) battery carrier, BHS model ATC-36 Mag, Toyota model# 6HBW20, serial# 20326, 4000# capacity, ...

West Salem Machine bale breaker, model 15-60, with approximately 48" wide x 174" long feed conveyor, with (3) 7- blade choppers, (1) 14-blade saw ...

Process Control Corporation material push/pull vacuum pump with associated controls.

weir style float / sink tank, carbon steel construction, approximately 7'6" wide x 13' long x approx 10' high, dual cone bottom hoppers on legs

Toyota hand truck with Battery Handling Systems (BHS) battery carrier, BHS model ATC-36 Mag, Toyota model# 6HBW20, serial# 19137, 4000# capacity, ...

 Gardner Denver air compressor, model EDF99D, 125 maximum psi, 75 hp motor, 460 volt, with control cabinet and air cooling, serial# S031981, built...

34" diameter x 39' long drum dryer, carbon steel construction, with internal baffles, 8" discharge on bottom end, approximately 45" discharge heig...

Conair stand pelletizer, model 3508, 8" wide helical rotor, pull roll assembly with rubber pull roll, 15 hp, 230 volt motor, serial# 12-080283. *...

2.5" Sterling extruder, 24:1 L/D, electrically heated, air cooled, with 40 HP DC motor with SCR controller, 3.95:1 gearbox ratio, 100 RPM output s...

inclined, dewatering twin screw conveyor, carbon steel construction, approx. 35" wide x 14' long trough, 15" diameter screws, individually driven ...

Sterling blower, model 13 MS, no motor, 14" inlet/outlet, serial# 18465, built 1995. ...[more]

Conair granulator, model CW1824, 18" x 24" feed opening, 3 knife open rotor, 25 hp, 460 volt motor, with sound enclosure, serial# 491-100708.1, bu...

 30" W x 12' L Hytrol Belt Conveyor ***Loading Fee $100.00*** ...[more]

10 hp Conair blower system, model CR2000, indoor use, in enclosure, 480 volt, in cabinet, with controls, serial #64354

Sterling run off table, 70" wide x 120" long, with dual parallel 25" wide belts, driven by estimated 2 hp motor, with 50" wide inclined air table....

Chicago blower, size 24-1/2 , 25 hp blower, 460 volt, 24" inlet, 21" x 23" outlet, serial# 86289-1, built 2010 ...[more]

 2.5" Diverter Valve, carbon steel construction, with hydraulic pump.

pipe coiler, approx. 24" wide x 18" diameter hub, approx. 82" diameter coil take up, 3/4 HP, 90 volt DC motor with controllers. ***Loading Fee $1...

 Process Control gravametric blender, model XBECYUKJED, 4 material with loaders and receivers, rated up to 650#/hour, serial# 70100002, new 1997. ...

cyclone dust collector, carbon steel construction, approximately 36" diameter x 20" straight side x 42" cone bottom, 8" inlet, 6" outlet. ...[mor...

Inclined Screw Conveyor, with 8" screw x 148" in length, discharge height 58", approx 1 HP. ...[more]

Una Dyn Hopper Dryer with Heater and Blower, 200# Hopper with receiver.

Novatech hopper dryer system, model POD-250-B, rated 250 CFM, with blower, controls, 230 volt, with ten (10) Novatech hopper receivers model PEE-W...

Roach cleated belt conveyor, 36" wide x 288" long, with gearbox less motor, serial# 469948-2.***Loading Fee $200.00***

 Weir style float sink tank, carbon steel construction, approximatelyt 110" x 100" x 72" deep x 65" cone bottom chamber, on legs with approximatel...

Gala Industries underwater pelletizing system with Gala model 8MUP cutting head with 5 hp XP motor, with oil heated die plate and water box, with ...

 Mitts & Merrill Hog Mill model 13 CSD 15" x 18" feed opening, 30" diameter rotor, belt driven by 100 hp, 460 volt motor, with infeed belt conveyo...

 34" diameter 39' long drum dryer, carbon steel construction, with internal baffles, 7" x 9" discharge, approximately 56" discharge height, on fra...

 60" Sweco screen, model XS60S888LKUE, stainless steel construction, single deck, on base with 2.5 hp, 460 volt motor, serial# 968076-A11/10. ......

Yale hand truck with Battery Handling Systems (BHS) battery carrier, Yale model MPW060LEN2412748, serial# A897N02853B, vacuum securing mechanism w...

30" Russel Finex sieve, model 26070LDAES, stainless steel construction, single deck, 1.5 hp, 230/460 volt motor, on base with casters, serial # RA...

NPK vacuum system, type HITB-06E 220/R6 HL, carbon steel construction, with 10 hp, 230 volt blower, rated 6 cu meter/minute, 2200 MMAQ with receiv...

Gardner Denver air compressor, model EDE99K04, 125 maximum psi, 50 hp motor, 460 volt, with control cabinet (no interface or internals), air cooli...

500 gallon plastic tank, 64" diameter x 34" straight side, hole cut in top, 2" side bottom outlet, on carbon steel frame, serial# 0130122711001, b...

Float sink tank, carbon steel construction, 96" long x 60" wide x 38" triangular bottom.***Loading Fee $200.00***

Sterling blower, model 1120FV, no motor, 12" inlet/outlet, serial# 69166 4A, built 2000. ...[more]

 Herbold Granulator, Model SMS45/80, 18" x 30" grinding chamber, 150 H.P. drive motor, 460 volts, 5 knife rotor, 3 bed knives, additional flywheel...

13' Universal Industries bucket elevator, model# C6-600-ED, carbon steel construction, approximately 15' discharge height, plastic belts and bucke...

Process Control gravametric blender / feeder, carbon steel construction, 4 material with loaders and receivers, 115 volts ***Loading Fee $100.00*...

Process Control Corporation material push/pull vacuum pump with associated controls. ***Loading Fee $100.00*** ...[more]

Killion lab multi-filament extrusion system with One(1) 1" Killion extruder, 24:1 L/D, electrically heated, air cooled, jacketed feed section, 3 H...

conveyor, approxmately 36" wide x 252" long smooth belt, with 2 hp, 208-230/460 volt drive.

 Sterling blower, 10 hp blower, 230/460 volt, 10" inlet/outlet. ...[more]

Stokes oil seal vacuum pump, model 146-13, rated 30 cfm with 1.5 hp xp motor, lot# 78491-1, serial# 84902.

Keaser Air Compressor, Model ICS90, 75 H.P. 460 volt motor, 350 CFM @ 110 PSI, air cooled, 3439 service hours, 45345 load hours, Serial No. 752619...

Acrison volumetric feeder, model BDF-4-N/2, stainless steel construction, twin conditioning screws driven by independent 3 hp, 230/460 volt xp mot...

Flex-Weigh Corp balance, model PGC-1318, approximately 13" x 18" stainless steel top, rated 200# capacity, .05 accuracy, with digital readout, ser...