Valve Sudmo 2" Air Valve Cluster, Type DN2"/PN6/1.4404

Valve Sudmo 2" Air Valve Cluster, Type DN2"/PN6/1.4404

Valve 2" Air Valve Cluster includes Pipe Manifold in Between Valves

S/S Solenoid Control Panel

CIP Chemical Feed System including: (13) Pumps, Regulator Control Panel and Barrel Containments

Aprox. 192 ft. Installed 2" S/S Piping Located in CIP Room Only including: Piping, Hangers, Aprox. 11 ft. Above CIP Systems Horizontal (NOTE: Does...

Emergency Eyewash/Shower Station

Open Lot

Open Lot

Open Lot

Open Lot

Open Lot

BULK BID LOT #126 TO LOT #131 - LINE 1 GAL. ROTARY JUG FILLING LINE

Federal 26-Valve Rotary Filler, Machine #1771GWS6/268R1068 with 8-Head Screw Capper with Cap Feeder Set-Up to Run Portola DBJ 38 mm Caps, (Set up ...

2008 Enercon Tamper Induction Super Sealer, Model LM5022 - 213, S/N C23377-01

2011 Barry Wehmiller S/S Slant Caser, Model EC40A, S/N EC40A115 with Allen Bradley MicroLogix 1000 PLC Controls includes Aprox. 11 ft. Infeed/Outf...

Aprox. 19 ft. S/S Product Conveyor with 4-1/2" W Plastic Table Top Chain, Side Rails, Leg Supports and (1) Drive

2011 Barry Wehmiller S/S Hydraulic Double Stacker, Model Double Stacker, S/N ES20A118 with Allen Bradley MicroLogix 1000 PLC Controls

2011 Barry Weimiller Aprox. 101" H S/S Case Inverter, Model EX10A, S/N EX10A191, 120 V, Single Phase

Open Lot

BULK BID LOT #134 TO LOT #139 - LINE 2 HALF GAL. ROTARY JUG FILLING LINE

Federal 26-Valve Rotary Filler, Machine #1725GWS6/268R1038 with 8-Head Screw Capper with Cap Feeder Set-Up to Run Portola DBJ 38 mm Caps, (with Ga...

2008 Enercon Tamper Induction Super Sealer, Model LM5022 - 213, S/N C23377-02

2011 Barry Wehmiller S/S Slant Caser, Model EC40A, S/N EC40A114 with Allen Bradley 1000 PLC Controls

Aprox. 19 ft. S/S Product Conveyor with 4-1/2" W Plastic Table Top Chain, Side Rails, Leg Supports and (1) Drive

2011 Barry Wehmiller S/S Hydraulic Double Stacker, Model Double Stacker, S/N ES20A117 with Allen Bradley MicroLogix 1000 PLC Controls

2011 Barry Wehmiller Aprox. 115" H S/S Case Inverter, Model EX10A, S/N EX10A190, 120 V, Single Phase

Open Lot

2009 Barry-Wehmiller/Thiele S/S Double Hydraulic Case Stacker, Model ES20A, S/N ES20A114 with Allen Bradley MicroLogix 1000 PLC Controls

Aprox. 190 ft. L 2-Lane Overhead Case Conveyor System with 15" W S/S Tradck, Rex Plastic Chain, Straight Sections, Bends, (2) Drives, Supports, La...

Aprox. 86 ft. L Ground Level Case Conveyor System with Above Ground S/S Case Conveyor Track, Union DF-3498 Series Chain, including Straight Sectio...

Case Conveyor Control System including: (2) Starter Control Boxes with (14) Allen Bradley Size 1 Starters and (2) VFDs (NOTE: Does Not include and...

Aprox. 9 ft. H x 6 ft. W Grip Type Adjustable S/S Lowerator Conveyor (Utilized with Small Bottle Line)

Aprox. 7-1/2 ft. L 3-Lane Small Bottle Conveyor

Ecolab Aprox. 99" L x 24" W x 21" Deep Portable S/S Jet Spray COP/Wash Trough with Aprox. 7-1/2 hp Centrifugal Pump, Anderson AJ-300 and Partlow M...

Sudmo 2" S/S Clamp Type Air Valves, Type DN2"/DN6-1.4404

Aprox. 230 ft. Installed 1-1/2" to 2" S/S Piping with Hangers and Fittings (NOTE: Includes Piping in This Room Only)

Reelcraft S/S Retractable Hose Reel with Hose and Nozzle

Ecolab Foaming Stations, Model TDF, (1) S/N 001230

(3) Pcs. - S/S Ink with Foot Controls, Artisan Heater and Bradley Emergency Eyewash Station

Open Lot

Open Lot

BULK BID LOT #156 TO LOT #157 - 2009 ROCHELEAU 12-HEAD HDPE BLOW MOLDER WITH 8 OZ. SINGLE SERVE MOLD SET

2009 Rocheleau 12-Head HDPE Blower Molder, Model RS70, S/N RS70-09-19 with Aprox. 48-1/2" l X 14" w Platen, 43-3/4" Center to Center Tie Bar Spaci...

2009 12-Wide Single Serve Half Pint/8 oz. HDPE Mold Snap Screw Trim Finish (NOTE: Installed But Never Operated!!) ...[more]

BULK BID LOT #159 TO LOT #160 - UNILOY 6-HEAD HDPE BLOW MODER WITH GAL. MOLD SET

Uniloy 6 Head HDPE Blow Molder, Model 350R2, S/N 3709, Set-Up with Platen Size Aprox. 15-1/2" W x 67" L, Tie Bar Spacing Aprox. 31" and 62" W, 8" ...

Gal. HDPE Molds, Mold #80122 with DBJ Screw Cap Trim Finish (Operated Average Range Bottles Between 58 gram to 63 gram)

BULK BID LOT #162 TO LOT #163 - UNILOY 6-HEAD HDPE BLOW MOLDER WITH HALF GAL. MOLD SET

Uniloy 6-Head HDPE Blow Molder, Model 350R2, S/N 3733, Set-Up with Platen Size Aprox. 45" L x 15", Tie Bar Spacing Center to Center Aprox. 40" W, ...

Half Gal. HDPE Mold Set, Mold #70219 with DBJ Screw Cap Trim Finish (Operated Average Range Bottles Between 58 gram to 63 gram)

BULK BID LOT #165 TO LOT #166 - UNILOY 4-HEAD HDPE BLOW MOLDER WITH GAL. MOLD SET

Uniloy 4- Head Blow Mold, Model 350R2, S/N 2502, Set-Up with with Platen Size Aprox. 41" L x 15-1/4", Tie Bar Spacing Center to Center Aprox. 36" ...

Gal. HDPE Mold Set, Mold #80131 with DBJ Screw Cap Trim Finish (Operated Average Range Bottles Between 58 gram to 63 gram)

BULK BID LOT #168 TO LOT #169 - UNILOY 4-HEAD HDPE BLOW MOLDER WITH GAL. MOLD SET

Uniloy 4- Head Blow Mold, Model 350R2, S/N 2501, Set-Up with with Platen Size Aprox. 41" L x 15-1/4", Tie Bar Spacing Center to Center Aprox. 36" ...

Gal. HDPE Mold Set, Mold #80122-1000 with DBJ Screw Cap Trim Finish (Operated Average Range Bottles Between 58 gram to 63 gram)

Open Lot

Foremost 15 hp HDPE Resin Regrinder, Model HD6, S/N 15586 (Regrinder #1)

Foremost 15 hp HDPE Resin Regrinder, Model SHD6, S/N 31751 (Regrinder #2)