{ Group of lots: 120, 121, 122 } 5'' MACHINE VISE

{ Group of lots: 120, 121, 122 } 6'' DOUBLE SIDED VISE

MULLEN TESTER, BURST TESTER, S/N: 65-A-235

HARTFORD 8'' DIVIDING LEAD

KEARNEY & TRECKER 9 1/2'' ASTRONOMICAL DIVIDER

{ Group of lots: 126, 127 } (3) AIR HOSES

{ Group of lots: 126, 127 } (2) SETS OF OXY/ACETELYNE HOSES

WALKER TURNER 20'' FLOOR TYPE DRILL PRESS

ALLEN 18'' FLOOR TYPE DRILL PRESS, WITH 300-1200 RPM

WYSONG 28'' FLOOR TYPE DRILL PRESS

PRODUCTO SCREW PRESS, WITH 31'' OPENING

PORTER CABLE TYPE BG-8 WET / DRY BELT GRINDER, WITH 8'' BELT, S/N: 5078

BROWN & SHARPE MDL. 510 HAND FEED SURFACE GRINDER, WITH 5'' X 10'' BROWN & SHARPE MICRO MESH CHUCK, S/N: 523-510-1029

DOALL MDL. G-1 SURFACE GRINDER, WITH MAGNALOCK, 6'' X 18'' ELECTROMAGNETIC CHUCK, DoALL SELECTOR, 6 1/2'' WHEEL, S/N: G1-49622

2 DOOR STEEL CABINET & CONTENTS

DOALL MDL. DH-612 AUTO FEED SURFACE GRINDER, WITH 6'' X 12'' MAGNALOCK, ELECTROMAGNETIC CHUCK, HYDRAULIC TANK, S/N: 138-703302

SANFORD MFG CO MDL. MG HAND FEED SURFACE GRINDER, WITH WALKER 5'' X 10'' MAGNETIC CHUCK, S/N: 152596M

REID MDL. 618V PRECISION AUTO FEED SURFACE GRINDER, WITH WALKER 6'' X 18'' MAGNETIC CHUCK, 1.25HP

GRINDING WHEELS

BRIDGEPORT 1HP VERTICAL MILLING MACHINE, WITH 9'' X 42'' TABLE, 80-2720 RPM, S/N: 12BR 43854 (AS IS; NEEDS WORK)

STERNVENT DUST COLLECTOR

THOMPSON MDL. 4C 14'' X 48'' HYDRAULIC SURFACE GRINDER, S/N: 22106

DOALL MDL. ML 24'' X 24'' VERTICAL BANDSAW, WITH 16'' THROAT, BLADE WELDING & GRINDING ATTACHMENT, 0-1600 RPM, S/N: 4611305

{ Group of lots: 143, 144 } (4) SETS OF PARTS DRAWER CABINETS

{ Group of lots: 143, 144 } (10) SECTIONS OF SHELVING WITH PUNCH DIE SETS

FINGER RACKS WITH PART BINS & CONTENTS

BUDGIT 1 TON ELECTRIC HOIST WITH PENDANT CONTROL

DOALL MDL. C-4 HORIZONTAL BANDSAW, WITH MANUAL CLAMPING, 16'' OPENING, 16'' WIDE CONVEYOR, COOLANT, S/N: 234-691482

(3) SECTIONS OF RACK WITH ASSORTED RAW MATERIAL, FLAT STOCK, BARS, PIPE, TUBES, ANGLE, ETC.

DIACRO MDL. 4 24'' HAND BRAKE, S/N: 4089

ROCKWELL 1/2HP DOUBLE END CARBIDE GRINDER

WARNER & SWASEY NO. 1A TURRET LATHE, WITH 12'' 3-JAW CHUCK, M-470, 3'' BORE, S/N: 539343

OKUMA MDL. L-S 21'' X 60'' LATHE, WITH 35-1800 RPM, INCH / MM THREADING, STEADYREST, TAILSTOCK, (2) 12'' 3-JAW CHUCKS, 2'' BORE, TAPER ATTACHMENT,...

ALORIS MDL. CA TOOL POST WITH TOOL HOLDERS

LOGAN 10'' X 24'' LATHE, WITH 4'' & 5'' 3-JAW CHUCKS, TAILSTOCK, S/N: 850

HERCULES II 20'' X 60'' GAP TYPE LATHE, WITH TAILSTOCK, STEADYREST, 17 1/2'' 4-JAW CHUCK, 14'' 4-JAW CHUCK, FACE PLATE, JIB ARM, APPROXIMATELY 28'...

ALORIS MDL. CA TOOL POST WITH TOOL HOLDERS

DAREX MDL. E-90 DRILL SHARPENER

RALMIKE MDL. 8D RADIUS CUTTER

{ Group of lots: 159, 160 } MICROMETERS

{ Group of lots: 159, 160 } PIN GAGE SET

MICROMETER

{ Group of lots: 162, 163 } HYDROSCOPE

{ Group of lots: 162, 163 } PIN GAGE SET

3C COLLET FIXTURE WITH COLLETS

{ Group of lots: 165, 166 } NSK MICROMETER SET

{ Group of lots: 165, 166 } BROWN & SHARPE 19'' HEIGHT GAGE

{ Group of lots: 167, 167A } 6'' BENCH VISE WITH BENCH

{ Group of lots: 167, 167A } BORE GAGE

{ Group of lots: 168, 169 } 2 DOOR STEEL CABINET & CONTENTS

{ Group of lots: 168, 169 } (2) RACKS WITH CONTENTS, DIE SHOES & SPACERS

PARTS DRAWER CABINETS WITH ARBORS

HANNIFIN MDL. 16 TONF-160-AOG DOWNACTING C-FRAME PRESS, WITH SINGLE LEVER, S/N: C-65891

STARRETT 12''-16'' MICROMETER

DUMORE TOOL POST GRINDER

THE CUSHMAN 9'' 4-JAW CHUCK

ATLAS NO. 4 COMPOUND MANDREL PRESS

{ Group of lots: 176, 177, 178 } 8'' LAPPING PLATE

{ Group of lots: 176, 177, 178 } CARBIDE INSERTS

{ Group of lots: 176, 177, 178 } STARRETT HEIGHT STAND