HARRINGTON OVERHEAD CRANE SYSTEM, 85’L X 3-TON CAP., CHAIN HOIST, PENDANT CONTROL (BATH B1)

8', 4,000LB CAP. SPREADER BAR W/ LIFTING HOOKS (BATH B1)

PACK AIR ASSEMBLY INC. DUAL BELT CONVEYOR, (2) 3-1/8"W BELTS X 25'L APPROX. (BATH B1)

2-LANE BELT CONVEYOR W/ MOTOR, TRANSFORMER AND CONTROLS (BATH B1)

PACK AIR INC. APPROX. 57'L X 26"W 4-LANE POWERED BELT CONVEYOR W/ CONTROLS (BATH B1)

APPROX. 16'L X 12"W SINGLE LANE POWERED INCLINE BELT CONVEYOR W/ CONTROLS AND 4' ROLLER CONVEYOR W/ SLIDE (BATH B1)

PACK AIR ASSEMBLY INC. APPROX. 80'L X 12"W POWERED BELT CONVEYOR W/ CONTROLS (BATH B1)

PACK AIR ASSEMBLY INC. APPROX. 12'L X 12"W POWERED BELT CONVEYOR W/ CONTROLS AND METAL ROLLER GATE (BATH B1)

PACK AIR ASSEMBLY INC. APPROX. 9'L X 24"W POWERED DUAL TWIST CONVEYOR W/ POWER FLEX 4 DIGITAL CONTROLS AND CONTROL PANEL (BATH B1)

APPROX. 8'L X 16"W POWERED BELT CONVEYOR W/ CONTROLS (BATH B1)

LOT OF (3) METAL POWERED ROLLER CONVEYORS INCLUDING HYTROL 38"W X 5'L, HYTROL 26"W X 10'L, 21"W X 8'L (BATH B1)

CATWALK/STAIRWAY OVERPASS, APPROX. 10'L W/ 6-STEPS (BATH B1)

CROWN TITON 10HP MOTOR W/ BLOWER AND APPROX. 15'L X 12"W SOUND ENCLOSURE (BATH B1)

LOT OF (2) BRETTING BACKSTANDS, S/N 4548-91, 83”W, 72”DIA. W/ CONTROL PANELS (BATH B4)

1963 PCMC EMBOSSER, S/N M826, , 85” MAX WIDTH, PERFORATED ROLL, 85.5”W, 28.6” CIRCUMFERENCE, 4,091” PERF. LENGTH MIN, 4.091” PERF. LENGTH MAX, (6)...

GE KINMATIC DC MOTOR 60HP W/ LEESON 1HP MOTOR/BLOWER (BATH B4)

LOT OF (4) OHIO GEARBOXES, RATIO 1/1 W/ STANDS AND SHAFT (BATH B4)

BALDOR 3HP MOTOR W/ HYDRAULIC POWER PACK (BATH B4)

LOT OF (2) INDRAMAT SERVO DRIVES 132C-B350B3-B503-B37T/5020 AND 132C-B35033-B503/B3V1/5020 (BATH B4)

SEW EURODRIVE RFB2DT2ID6BMG05HR AND (2) OTHER DRIVE MOTORS (BATH B4)

ELECTRICAL CONTROL STAND W/ ALLEN BRADLEY PANELVIEW PLUS 600 (BATH B4)

2-DOOR ELECTRICAL CABINET W/ REXROTH DRIVES/CARDS, ETC. (BATH B4)

LOT OF (2) OLSUN ELECTRICAL AND GE TRANSFORMERS, 3 PHASE, 75KVA AND 25KVA (BATH B4)

ELECTRICAL CONTROL CABINET W/ INDRAMAT SERVO CONTROLLERS AND RITTAL COOLING UNIT (BATH B4)

KARNEL MRD2 TAIL SEALER, FIXED GUN, 15 LOGS/MIN MAX CYCLE SPEED, 83” MAX WIDTH, SLC504 PLC (BATH B4)

ROLCO ACCUMULATOR, S/N 6586, (315) BUCKETS, 83” MAX LOG WIDTH, (2) LANE DISCHARGE, SLC504 PLC (BATH B4)

1977 PCMC 100 SERIES LOG SAW, S/N 5922, GEARS, 4.25” CUT LENGTH POSITION, (120) MAX CUTS, 94” MAX WIDTH OF LOGS, , ROTARY GRINDING, TRIMEX TYPE SH...

1999 LANGEHAMMER F81-M130-2-5/300 DIVERTER, 2:2, 2:3,2:4 CONFIGURATION, CONTROLLED BY SAW (BATH B4)

1984 HAYSSEN UF160 RIGHT HAND WRAPPER, S/N 16417, (3) INFEED LANES, POLY WRAPPING MATERIAL, 4 – 6 (176SH) FORMAT, 16.5” MAX PACK WIDTH, 6.0” MAX P...

VALLEY TISSUE SINGLE ROLL WRAPPER, (2) INFEED LANES, (1) LAYER, WRAPPING MATERIAL PAPER, 140PPM MAX CYCLE SPEED, 480VAC, ABSLC504 ELECTRONIC PLATF...

1992 SALWASSER L44, R402 CASE PACKER, S/N 9208155, (2) TO (5) INFEED LANES, MANUAL MAGAZINE FEEDER, (300) CASES IN MAGAZINE, 20” MAX CASE WIDTH, 1...

LOT OF (13) PALLETS/CRATES OF CASE PACKER CHUTES AND PARTS (BATH B4)

LOVESHAW 16B CASE SEALER, TAPE – EXTERNAL, MICROLOGIX PLC (BATH B4)

HARRINGTON OVERHEAD CRANE SYSTEM, 85’L X 3-TON CAP., CHAIN HOIST, PENDANT CONTROL (BATH B4)

8' SPREADER BAR W/ LIFTING HOOKS, 4,000LB CAP. (BATH B4)

PACK AIR ASSEMBLY INC. DUAL POWERED BELT CONVEYOR, 3-1/8"W BELTS X APPROX. 25'L W/ ALLEN BRADLEY CONTROLS (BATH B4)

PACK AIR ASSEMBLY INC. APPROX. 20'L X 19"W POWERED CONVEYOR, 3-3-1/4" LANES W/ CONTROLS (BATH B4)

PACK AIR ASSEMBLY INC. APPROX. 12'L X 3-1/4" POWERED BELT CONVEYOR W/ SHUTOFF (BATH B4)

APPROX. 18'L X 12"W POWERED BELT CONVEYOR W/ CONTROLS AND GATE (BATH B4)

APPROX. 36"L X 12"W POWERED INCLINE BELT CONVEYOR W/ CONTROLS (BATH B4)

APPROX. 20'L X 12"W POWERED BELT CONVEYOR W/ CONTROLS AND GATE (BATH B4)

APPROX. 7-1/2'L X 30"W ACCUMULATION TABLE (NO MOTOR) (BATH B4)

APPROX. 13'L X 12"W POWERED BELT CONVEYOR W/ CONTROLS AND GATE (BATH B4)

PACK AIR ASSEMBLY INC. APPROX. 60'L X 12"W POWERED BELT CONVEYOR W/ CONTROLS (BATH B4)

PACK AIR ASSEMBLY INC. APPROX. 35'L X 3"W POWERED CONVEYOR W/ CONTROLS (BATH B4)

CATWALK/STAIRWAY OVERPASS, 5-STEPS (BATH B4)

CATWALK/STAIRWAY OVERPASS, 5-STEPS W/ APPROX. 10'L PLATFORM (BATH B4)

LOT OF (4) POWERED ROLLER/BALL CONVEYORS - APPROX. 10'L X 21"W W/ CONTROLS, HYTROL 5'L X 37"W, MATTHEWS 10'L X 21"W, 3'L X 21"W (BATH B4)

ELECTROMAX 10HP MOTOR W/ BLOWER AND SOUND ENCLOSURE (BATH B4)

LOT OF (2) PCMC BACKSTANDS, 69”W, 72" DIA. (TOWEL T1)

MARATHON ELECTRIC BLUE MAX 30HP MOTOR, 230/460V, 3,600 RPM, 286T FRAME (TOWEL T1)

MARATHON ELECTRIC BLUE MAX 30HP MOTOR, 230/460V, 3,600 RPM, 286T FRAME (TOWEL T1)

1990 PCMC NESTED EMBOSSER, S/N 7257, RUBBER-TO-STEEL, NESTED STYLE, DIAMOND PATTERN, 1.25” FLAT USUAL NIP WIDTH, LAMINATOR, N-2496, PERFORATED ROL...

MARATHON BLUE MAX 75HP MOTOR, 230/460V, 3,000 RPM, 365TC FRAME (TOWEL T1)

SPARE LAMINATOR FOUNTAIN ROLL IN CRATE (TOWEL T1)

SPARE TOWEL LAMINATOR TRANSFER ROLL IN CRATE (TOWEL T1)

SPARE ROTADYNE ROLL (TOWEL T1)

SPARE TOWEL ANILOX ROLL IN CRATE AS DESCRIBED ON LABEL IN PHOTOS (TOWEL T1)

SPARE TOWEL RUBBER GLUE ROLL IN CRATE AS DESCRIBED ON LABEL IN PHOTOS (TOWEL T1)

SPARE RT PLATE ROLL IN CRATE AS DESCRIBED ON LABEL IN PHOTOS (TOWEL T1)