IMPORTANT REMOVAL INFORMATION - COVID-19 Lot removal to be coordinated with Site Supervisor or An Approved Machinery Mover. **SITE WILL BE ACCESSI...

1993 PERINI 1032 Embosser, s/n 07086, Type: Steel-to-Steel, Style: Matched, Max Width: 83.5”, Emboss Pattern: Flower US, Emboss Name: Plainwell Bu...

PERINI 1200 Backstands, s/n 2895, Max Parent Roll Width: 102”, Max Parent Roll Diameter: 100”, Shaftless, (2) Back Stands (B2 BACKSTAND)

BACKSTANDS DRIVE CABINET, AND MAIN ELECTRICAL CABINET,WITH PLC AND DRIVES (B2 BACKSTAND) ...[more]

PALLET WITH SPARE PARTS, FOR BACKSTANDS, CYLINDERS, BELTS BEARINGS, (B2 BACKSTAND)

GUARDING, PERIMETER, SQUARE TUBING WITH WIRE MESH, BARE METAL AND ORANGE AND BLACK, ALL GUARDING AROUND EMBOSSER AND BACK STANDS INCLUDING LIGHT C...

OPERATOR STATION WITH ALLEN BRADLEY PANEL VIEW 1000, (B2 WINDER)

SPARE PARTS, 2 BOXES, 150 SERIES  WINDER PARTS (B2 WINDER) ...[more]

2006 PCMC RotoSeal Tail Sealer, s/n 1004450.026, Type: Wire, 45 Logs/min Max, Max Width: 135”, Allen Bradley Control (B2 TAIL SEALER)

ROTOSEAL TAIL SEALER SPARE PARTS, SMALL BOX SENSOR, GLUE CABLE, SHOCK ABSORBER (B2 TAIL SEALER) ...[more]

PERINI Accumulator, (150) Buckets, Max Log Width: 83”, (4) Lane Discharge (B2 ACCUMULATOR)

SPARE PARTS, FOR PERINI ACCUMULATOR, (B2 ACCUMULATOR)

2006 PCMC ProLog LT Log Saw, s/n 1004589.033, Servos, Cut Length / Slitter Position: Variable, 250 Cuts/min Per Lane Max, Max Width of Logs: 82”, ...

PALLET OF SPARE PARTS FOR PCMC LOG SAW PROLOG LT, CLAMPS, BELTS (B2 LOG SAW)

PALLET OF 24" LOG SAW BLADES, TKM, IKS (17 BLADES  TOTAL)  AND BLADE GUARDS (B2 LOG SAW) ...[more]

Trim Blow (Grinding Assembly Refurbished in 2018), NEED TO BE REBUILD NOT READY FOR INSTALL, (B2 LOG SAW DISCHARGE)

3-ton Cap. Crane, 17 FEET IN BETWEEN BEAM WIDE X 61 FOOT LONG X 60 FEET OF TRAVEL, MONO RAIL, 18 FEET FROM THE FLOOR TO THE TOP OF THE CRANE STRUC...

EATON /CUTLRT-HAMMER HEAVY DUTY SAFETY SWITCH, 400 A,600 V (B2 ELECTRICAL CABINET EXTERNAL DISCONNECT)

GLUE TOTE STAND (B2 BACKSTAND)

DYNAMIC CONVEYOR CORP, TRIM CONVEYOR, POWERED 110 VOLT 16" WIDE X 12' LONG X 76" HIGH (B2 LOG SAW) ...[more]

90 DEGREE CONVEYOR, 9' X 18' LONG, 4 LANE ADJUSTABLE RAILS (B2 LOG SAW DISCHARGE)

CROSS OVER STAIRS, 7 STEPS, 51" TALL CLEARANCE (B2 UNO WRAPPER INFEED)

PACK AIR, PACK TURNER CONVEYOR, 20" WIDE X 50" LONG (B2 UNO DISCHARGE)

PACK AIR DIVERTER TO HAND PACK STATION, DIVERTER 20" WIDE X 14' LONG, WITH 90 DEGREE HAND PACK CONVEYOR 9' X 13' LONG (B2 BETWEEN UNO AND CASE PAC...

INFINITY PACK UP ENDER, 25" WIDE X 118" LONG (B2 BETWEEN UNO AND CASEPACKER)

STRAIGHT CONVEYOR, 12" X 86" (B2 INFEED TO CASEPACKER)

PACK AIR, INCLINE CONVEYOR, 12" WIDE X 92" LONG (B2 INFEED TO CASE SEALER)

PACK AIR CONVEYOR, 90 DEGREE 12" WIDE X 6' SHORT LEG AND 19' LONG LEG (B2 KD PRINTER DISCHARGE)

CONVEYOR DRIVE CABINET

CORE ELEVATOR, HOPPER, WITH WHITE CART AND CONVEYOR UNDER HOPPER (B2 LINE)

LIGHTED QUALITY CHECK BOARD (B2 LINE)

HYDRAULIC PUMP, 15 GALLON TANK (B2 PUMP UNDER CORE HOPPER)

SERVO MOTORS, (5) ALLEN BRADLEY, (2)REXROTH SERVO MOTORS, NEED TO REMOVE FROM MACHINE (B2 REWINDER)

MARKEM IMAGE, 9232 PRINTER WITH PRINT HEAD (B2 WRAPPER)

MARKEM IMAGE, 5200 PRINTER WITH TWO PRINT HEADS AND STANDS, AND TRANFORMER (B2 KD PRINTER) ...[more]

CONVEYOR, 23" WIDE X 58" LONG, BELT TOP (B2 KD PRINTER CONVEYOR)

MARKEM IMAGE 5400 AND 9232 SPARE PARTS (B2 KD PRINTER) ...[more]

CORE LOAD SYSTEM FOR WINDER (B2 WINDER)

METTLER TOLEDO SCALE, 5' X 7' PLUS RAMP, 5000# MAX WITH DISPLAY UNIT, 110 VOLTS (B2 LINE) ...[more]

TMC UNO TISSUE WRAPPER, MACHINE #A3687, 4 LANE INFEED. (B2 UNO WRAPPER)

TMC UNO WRAPPER SPARE PARTS (B2 UNO WRAPPER)

PCMC CORE WINDER, MODEL 8032, INCLUDING 2 BACK STANDS, WINDER, SAW, ROLL DOWN TABLE, ELECTRICAL CAINET, VACUUM BLOWER FOR SAW HOUSE AND DRUM, COMM...

ABELL-HOWE JIB CRANE, WITH CM ELECTRIC CHAIN HOIST RATED FOR 300 LBS, WITH A BUSHMAN EQUIPMENT CORE STOCK CLAMP (B2 CORE MACHINE)

1991 PCMC/NORTHERN ENGRAVING 26481 Embosser, s/n N/A, Type: Rubber-to-Steel, Max Width: 102”, Emboss Pattern: Micro, Usual Nip Width: 31mm, Ply Bo...

BOX OF SPARE PARTS FOR PCMC EMBOSSER, (B3 EMBOSSER)

PCMC PLY BONC UNIT (B3 PLY BONDER)

PALLER OF SPART PARTS FOR PLY BONDER UNIT, SPARE WHEELS, NEW SPLIT WHEEL AND HUBS (B3 PLY BONDER)

STEEL EMBOSSING ROLLS, PATTERN N-3246 17.249" OD X 108" FL X 105" ENGRAVED LENGTH (B3 Back wall) (NOTE: PATTERN RIGHTS OWNED BY CASCADES, PATTERN ...

RUBBER EMBOSSING ROLL,GREEN NEOPRENE 18" OD WITH 16.028 CORE DIM, 108.250 FL X 105.125 WFL (B3 BACK WALL)

SPARE EMBOSSING ROLL BEARING HOUSINGS (B3 BACK WALL)

APPLIED ROLLER TECHNOLOGY, BOW ROLL SERIAL NUMBER 105HB15455.12"DIAMETER, 104.625" FACE WITH 1" OF BOW, AND 122.625 OVERALL LENGTH, 2.25" DIAMETER...

PICK UP GLUE APPLICATOR ROLL FOR 250 SERIES WINDER, RUBBER COATING, 101.5" RUBBER FACE, 7" DIAMETER (B3 BACK WALL)

PCMC Backstands, s/n 7295, Max Parent Roll Width: 104”, Max Parent Roll Diameter: 100”, Shaftless, (2) Back Stands (B3BACK STAND #1)

PCMC Backstands, s/n 7295, Max Parent Roll Width: 104”, Max Parent Roll Diameter: 100”, Shaftless, (2) Back Stands (B3BACK STAND #2)

PALLET OF SPARE PARTS FOR PCMC BACKSTAND, SERVO MOTORS, CYLINDERS (B3 BACK STANDS)

PCMC M-2536 Tail Sealer, s/n M-2536, Type: Wire, 45 Logs/min Max, Max Width: 111”, Giddings & Lewis Control c/w Winder INCLUDING ELECTRICAL CONTRO...

BOXES OF SPARE PARTS FOR PCMC TAIL SEALER, SENSORS, POWER SUPPLY, SERVO CONTROLLERS, AND SERVO MOTORS (B3 TAIL SEALER )

PCMC Accumulator, (295) Buckets, Max Log Width: 108”, (5) Lane Discharge (B3 ACCUMULATOR)

SPARE PARTS FOR PCMC ACCUMULATOR, (B3 ACCUMULATOR)

PERIMETER GUARDING 80/20 MATERIAL, AROUND ACCUMULATOR, 3 SIDES (B3 ACCUMULATOR)