338
Cookies help us deliver our services. By using our services, you agree to our use of cookies.
Accept Cookies Learn MoreLote
338
For rigger information, visit heathindustrial.com/riggers
If you want us to ship / palletize your purchases (if available) please fill out the following form:
https://heathindustrial.com/ship
We offer LIMITED services to the contiguous United States (aka “lower 48”). We do not ship to P.O. Boxes, Alaska, Hawaii or US Protectorates.
WE WILL ONLY SHIP TO ADDRESS ON FILE WITH BIDSPOTTER. If your address is incorrect in bidspotter, FIX IT. DO NOT ask us to ship to another address, we will only ship to address on file.
Our services include boxed, and limited palletized freight options. This does NOT include disassembly of assets.These services are also contingent on the location of the equipment and resources available at that location.. Shipping is subject to regulation. In situations where we do not have a forklift onsite, you will have to contract with another service provider to load your equipment.
BOXED SHIPMENT is available to support you with shipment services contracted by us for small purchases that can be boxed.
The Standard Processing Fees are as follows:
1 - 4 Lots: $15 per Lot
5-9 Lots: $10 per Lot
10 + Lots: $8 per Lot
This fee is based on items of a standard size and weight that can be easily boxed and shipped.
Oversized items and items in excess of 70lbs will incur an additional processing fee, and may need to be palletized and shipped via common carrier.
This fee does not include the incurred carrier rate charge that varies as a function of weight and size. We do not accept shipments involving you sending us a FedEx or UPS number, or labels. We will process the shipping directly with the carrier.
Pickup from our office is available for small hand carry items only. There will be a $50.00 - $500.00 fee for transport of above items to our warehouse, depending on size / quantity of items.
PALLETIZED SERVICE is available to prepare and load your pallet(s) onto a freight carrier, contracted by us. For all other services including you contracting with your own freight carrier, see below, THIRD PARTY PALLETIZING & CRATING. We will NOT offer palletizing services if you contract the freight carrier. Loading occurs at the sale premise. This does NOT include disconnection of power / utilities from assets, disassembly of assets, knocking down racking, etc. It means placing your items onto a skid and preparing for shipment. The Processing Fee is $100 per pallet and includes the pallet, packing, securing, labeling and forklift FOB loading.
THIRD-PARTY PALLETIZING & CRATING is available to support you with shipment services for larger purchases requiring pallets or crates. This service requires you to contact and contract your own freight carrier. We will not release your purchase to a third-party freight carrier without a Bill of Lading provided by you.
After purchase, please reply to the invoice email sent, requesting shipping, or email us @ auctions@heathindustrial.com. Please provide your invoice number and bidder number.
Please note that for boxed shipping and palletizing, there will be a delay in processing and shipping your items. Most of our boxed shipping is done at our main facility in Hoffman Estates, Illinois. We do not transport items back to our main facility on a daily basis for shipping. Be advised that this delay may be up to four weeks or longer. If you need your purchases shipped immediately, we suggest you contract with a third-party packing and shipping company.
American Manufacturing and Machining, Inc.
Auction Date: Tuesday, November 19th at 10:00 am EST
Location: 1908 Young Court, Racine, Wisconsin
Preview: Monday, November 18th from 8 am to 3:00 pm
Removal: Wednesday through Friday, November 13 - 15 th from 8 am to 3:00 pm daily
18% Buyers Premium applies on all online purchases.
Rigging Services Available from Alan Machinery Movers - 773-302-2362
Featuring:
CNC Vertical Machining Centers & Accessories
Haas Model VF-1B CNC Vertical Machining Center, s/n 47018 (New 2006), 20” X-Axis Travel, 16” Y-Axis Travel, 20” Z-Axis Travel, 10,000 RPM Spindle, 30 HP 2 Speed Gear Drive, 24 Station Automatic Tool Changer, Haas Control
Fadal Model VMC2216 (904) CNC Vertical Machining Center, s/n 012002024070 (New 2002), 22” X-Axis Travel, 16” Y-Axis Travel, 20” Z-Axis Travel, 10,000 RPM Spindle, 20 Station Automatic Tool Changer, Fadal Multiprocessor Control
Tree Model VMC1050/24 CNC Vertical Machining Center, s/n 9-20-93-1088, 40” X-Axis Travel, 20” Y-Axis Travel, 25” Z-Axis Travel, 7,000 RPM Spindle, 24 Station Automatic Tool Changer, Dynapath Delta Control
2 – Tree Model VMC760/20 CNC Vertical Machining Centers, s/n 9-16-94-1088 & 9-16-94-1029, 22” X-Axis Travel, 16” Y-Axis Travel, 22” Z-Axis Travel, 8,000 RPM Spindle, 4th Axis Drive, 20 Station Automatic Tool Changer, Dynapath Delta Control
Haas Indexer, s/n 506997
Large Quantity Cat 40 Toolholders & Several Tool Carts
CNC Turning Centers, CNC Lathe & Bar Feed
Haas Model SL-10 CNC Turning Center, s/n 69777 (New 2005), 6,000 RPM Spindle, Tool Presetter, Haas Control
Haas Model 300 Servo Bar Feed, s/n 91481 (New 2005) Currently on Haas SL-10
Haas Model SL-20T CNC Turning Center, s/n 62868 (New 2000), 3-Jaw Chuck, Tailstock, Haas Control
2 – Okuma Model Cadet LNC8 CNC Turning Centers, s/n D226 & C339, with 3-Jaw Chuck, Tailstock, 4,000 RPM Spindle, IGF Function, Okuma OPS 5020L Control
Standard-Modern 17”x60” Model 1760 CNC Lathe, s/n 12105MM, 3 & 4 Jaw Chucks, Anilam Series 1200 Control
Hardinge Model CHNC CNC Chucker, s/n CN-4317-T, with GE Fanuc OT Control, Hardinge Har-Matic Bar Feed
CNC Tapping Center
Brother Model TC-227 CNC Tapping Center, s/n 111529, 10 Station, Brother CNC-520 Control
CNC Vertical Mill
Tree Model Journeyman 350 CNC Vertical Mill, s/n 9-35-94-1005, 10”x38” Table, Dynapath Delta Control
Vertical Mills
Bridgeport 2 HP Series 1 Variable Speed Ram Type Vertical Mill, s/n 12BR189186, 42” Power Feed Table, DRO
DoAll 2 HP Model GPM-200V Variable Speed Ram Type Vertical Mill, S/N 1212499-C, 42” Power Feed Table
Surface Grinder
Acer 12”x24” Model AGS-1224AHD Hydraulic Surface Grinder, s/n 97060501, with Electromagnetic Chuck, Outside Hydraulics
Saws
Marvel Series 8 Model Mark II Universal Vertical Band Saw, s/n 826871
Drills
Arboga 20” Model A59 Drill, s/n 67266, T-Slot Table
Delta 17” 4-Spindle Drill with 3-Procunier Tapping Heads, Production Table
Delta 17” 4-Spindle Drill, Production Table
Toolroom Machines
DoAll 13”x48’ Toolroom Lathe, s/n 0256850-163, 2500 RPM Spindle, Inch/MM Threading, 3-4-6 Jaw Chucks, Collet Closer
Sunnen Model MBB-1600 Precision Honing Machine, s/n 41220 with Hone Tooling Separately Available
Beere Tipshear
Plant Equipment
Large Quantity Steel & Aluminum Bar Stock
Atlas Copco 15 HP Model GX11FF Screw Type Air Compressor, s/n CAI296769 (New 2008), 19,633 Hours on Meter
10 HP “Y-Type” Tank Mounted Air Compressor
Pneumatech Model ADA-40 Turbo V Dryer, s/n 9301-T1-886-ST
Trinco Model 36/BP Shot Blast Cabinet, s/n 63718-06
Mr Deburr Deburring Mill
Ranch King Pro 16.5 HP/42” Riding Lawn Mower
Murray 8 HP/24” Electric Start Snow Thrower
Misc. Plant Equipment Including Safety Kleen Parts Washer*Vises*Collets*Arbor Press*Belt & Disc Sanders*Carbide Double End Tool Grinder*Double End Tool Grinders*Lista Tool Cabinets*Ladders*Cantilever Racks*C-Clamps*Hand Trucks*Etc.
Inspection
Brown & Sharpe Model Microval Coordinate Measuring Machine, s/n 110383, 21-1/2”x29-1/2” Granite Table, Renishaw TP1S Probe, Micro Measure III Software
Deltronic 14” Model DH214 Optical Comparators, s/n 259114336, with 612-R DRO
Deltronic 14” Model DH214 Optical Comparators, s/n 229062846, with MPC-4 DRO
Acco Wilson Model 3JR Rockwell Hardness Tester, s/n 12477-981
Sunnen 2”-6” Model CF-1126 Gage Setting Fixture
Sunnen 0-2” Model CF-502 Gage Setting Fixture
Material Handling
Hyster 4,000 LB Model 40C LP Gas Forklift Truck, s/n CC02D17341U, 167.5” Max. Lift, 4402 Hours on Meter
Vestil 1,000 LB. Lift
Economy Electric Lift
Offices
Xerox Model XC830 Copier,Desks,File Cabinets,Drafting Table,Conference Table,Chairs,File Cabinets,Etc.
BidSpotter Customer Service Support Department
Have a question pertaining to the bidding process?
Visit our Frequently Asked Questions!
You can also start a live chat with a Bidspotter Support Representative by selecting Live Chat at the top of Bidspotter.com. More information on our chat system can be found by clicking here.
Customer Support Hours:
Email: support@bidspotter.com
Office: (253) 858-6777 Toll Free: (866) 597-2437
Please note our deposit requirements for bidders with no bidspotter bidder history or bidder history with any negative feedback:
Insufficient Bidspotter history
Due to your insufficient Bidspotter history we may require a deposit up to $500.00 USD (refundable) before you can be approved to bid. By registering to bid for this sale, you are giving us the right to pre-authorize a deposit of $500.00 USD. This pre-authorization is immediately refundable if you do not purchase anything, or if you choose to make other payment arrangements. Once you have established a sufficient positive Bidspotter history you will not have to deposit in order to get approved.
Bidspotter history with negative feedback
Due to your Bidspotter history we will require a $2,500.00 USD deposit (refundable) before you can be approved to bid. By registering to bid for this sale, you are giving us the right to pre-authorize a deposit of $2,500.00 USD. This pre-authorization is immediately refundable if you do not purchase anything, or if you choose to make other payment arrangements. Once you have established a sufficient positive Bidspotter history you will not have to deposit in order to get approved.
All Bidders
Everything will be sold to the highest bidders for cash, in accordance with our standard Terms of Sale which can be found on our web site at www.heathindustrial.com or by requesting a copy of our terms and conditions of sale by email to auctions@heathindustrial.com.
Your bid is a contract: Place a bid only if you are serious about buying the item. If you are the high bidder, you will enter into a legally binding contract with Heath Industrial. All bids are in US dollars.
A Buyers Premium will be added to all items sold. Heath Industrial makes every attempt to accurately describe all items at the auction sale, there are always possibilities of errors occurring which is out of our control. It is important to know this fact if you plan on placing a Proxy Bid or if you plan on bidding via bidspotter.com.
Please inspect before you bid and remember, everything is sold AS IS, WHERE IS with absolutely no warranty or guarantee of any kind, either written or implied.
Payments can be via company check, cash, or wire transfer. Credit Cards are accepted for an additional fee. All successful bidders will receive their invoices via email from Heath Industrial after the last day of the auction sale.
All successful bidders will be responsible for sales taxes which may be added to your invoice unless an exemption certificate is supplied prior to invoicing.
Heath Industrial reserves the right to automatically charge payment card on file with bidspotter.com, for any and all outstanding invoices not paid within 48 hours after the close of the auction.
Removal:
Rigging and removal is the responsibility of the buyer. Small items that can be carried out should be removed immediately after the auction or at the latest, the day after the auction. All riggers or buyers who will be removing items using any powered vehicle will need to provide a certificate of insurance that is acceptable to Heath Industrial. Removal will begin when the auction sale has been completed and payment in full has been received.
If you need assistance please call us at our corporate offices @ 847-380-1755 or via email at auctions@heathindustrial.com
Your question has been sent to the auctioneer.
There was an error sending your enquiry, why not try again later
General delivery information available from the auctioneer
For rigger information, visit heathindustrial.com/riggers
If you want us to ship / palletize your purchases (if available) please fill out the following form:
https://heathindustrial.com/ship
We offer LIMITED services to the contiguous United States (aka “lower 48”). We do not ship to P.O. Boxes, Alaska, Hawaii or US Protectorates.
WE WILL ONLY SHIP TO ADDRESS ON FILE WITH BIDSPOTTER. If your address is incorrect in bidspotter, FIX IT. DO NOT ask us to ship to another address, we will only ship to address on file.
Our services include boxed, and limited palletized freight options. This does NOT include disassembly of assets.These services are also contingent on the location of the equipment and resources available at that location.. Shipping is subject to regulation. In situations where we do not have a forklift onsite, you will have to contract with another service provider to load your equipment.
BOXED SHIPMENT is available to support you with shipment services contracted by us for small purchases that can be boxed.
The Standard Processing Fees are as follows:
1 - 4 Lots: $15 per Lot
5-9 Lots: $10 per Lot
10 + Lots: $8 per Lot
This fee is based on items of a standard size and weight that can be easily boxed and shipped.
Oversized items and items in excess of 70lbs will incur an additional processing fee, and may need to be palletized and shipped via common carrier.
This fee does not include the incurred carrier rate charge that varies as a function of weight and size. We do not accept shipments involving you sending us a FedEx or UPS number, or labels. We will process the shipping directly with the carrier.
Pickup from our office is available for small hand carry items only. There will be a $50.00 - $500.00 fee for transport of above items to our warehouse, depending on size / quantity of items.
PALLETIZED SERVICE is available to prepare and load your pallet(s) onto a freight carrier, contracted by us. For all other services including you contracting with your own freight carrier, see below, THIRD PARTY PALLETIZING & CRATING. We will NOT offer palletizing services if you contract the freight carrier. Loading occurs at the sale premise. This does NOT include disconnection of power / utilities from assets, disassembly of assets, knocking down racking, etc. It means placing your items onto a skid and preparing for shipment. The Processing Fee is $100 per pallet and includes the pallet, packing, securing, labeling and forklift FOB loading.
THIRD-PARTY PALLETIZING & CRATING is available to support you with shipment services for larger purchases requiring pallets or crates. This service requires you to contact and contract your own freight carrier. We will not release your purchase to a third-party freight carrier without a Bill of Lading provided by you.
After purchase, please reply to the invoice email sent, requesting shipping, or email us @ auctions@heathindustrial.com. Please provide your invoice number and bidder number.
Please note that for boxed shipping and palletizing, there will be a delay in processing and shipping your items. Most of our boxed shipping is done at our main facility in Hoffman Estates, Illinois. We do not transport items back to our main facility on a daily basis for shipping. Be advised that this delay may be up to four weeks or longer. If you need your purchases shipped immediately, we suggest you contract with a third-party packing and shipping company.
American Manufacturing and Machining, Inc.
Auction Date: Tuesday, November 19th at 10:00 am EST
Location: 1908 Young Court, Racine, Wisconsin
Preview: Monday, November 18th from 8 am to 3:00 pm
Removal: Wednesday through Friday, November 13 - 15 th from 8 am to 3:00 pm daily
18% Buyers Premium applies on all online purchases.
Rigging Services Available from Alan Machinery Movers - 773-302-2362
Featuring:
CNC Vertical Machining Centers & Accessories
Haas Model VF-1B CNC Vertical Machining Center, s/n 47018 (New 2006), 20” X-Axis Travel, 16” Y-Axis Travel, 20” Z-Axis Travel, 10,000 RPM Spindle, 30 HP 2 Speed Gear Drive, 24 Station Automatic Tool Changer, Haas Control
Fadal Model VMC2216 (904) CNC Vertical Machining Center, s/n 012002024070 (New 2002), 22” X-Axis Travel, 16” Y-Axis Travel, 20” Z-Axis Travel, 10,000 RPM Spindle, 20 Station Automatic Tool Changer, Fadal Multiprocessor Control
Tree Model VMC1050/24 CNC Vertical Machining Center, s/n 9-20-93-1088, 40” X-Axis Travel, 20” Y-Axis Travel, 25” Z-Axis Travel, 7,000 RPM Spindle, 24 Station Automatic Tool Changer, Dynapath Delta Control
2 – Tree Model VMC760/20 CNC Vertical Machining Centers, s/n 9-16-94-1088 & 9-16-94-1029, 22” X-Axis Travel, 16” Y-Axis Travel, 22” Z-Axis Travel, 8,000 RPM Spindle, 4th Axis Drive, 20 Station Automatic Tool Changer, Dynapath Delta Control
Haas Indexer, s/n 506997
Large Quantity Cat 40 Toolholders & Several Tool Carts
CNC Turning Centers, CNC Lathe & Bar Feed
Haas Model SL-10 CNC Turning Center, s/n 69777 (New 2005), 6,000 RPM Spindle, Tool Presetter, Haas Control
Haas Model 300 Servo Bar Feed, s/n 91481 (New 2005) Currently on Haas SL-10
Haas Model SL-20T CNC Turning Center, s/n 62868 (New 2000), 3-Jaw Chuck, Tailstock, Haas Control
2 – Okuma Model Cadet LNC8 CNC Turning Centers, s/n D226 & C339, with 3-Jaw Chuck, Tailstock, 4,000 RPM Spindle, IGF Function, Okuma OPS 5020L Control
Standard-Modern 17”x60” Model 1760 CNC Lathe, s/n 12105MM, 3 & 4 Jaw Chucks, Anilam Series 1200 Control
Hardinge Model CHNC CNC Chucker, s/n CN-4317-T, with GE Fanuc OT Control, Hardinge Har-Matic Bar Feed
CNC Tapping Center
Brother Model TC-227 CNC Tapping Center, s/n 111529, 10 Station, Brother CNC-520 Control
CNC Vertical Mill
Tree Model Journeyman 350 CNC Vertical Mill, s/n 9-35-94-1005, 10”x38” Table, Dynapath Delta Control
Vertical Mills
Bridgeport 2 HP Series 1 Variable Speed Ram Type Vertical Mill, s/n 12BR189186, 42” Power Feed Table, DRO
DoAll 2 HP Model GPM-200V Variable Speed Ram Type Vertical Mill, S/N 1212499-C, 42” Power Feed Table
Surface Grinder
Acer 12”x24” Model AGS-1224AHD Hydraulic Surface Grinder, s/n 97060501, with Electromagnetic Chuck, Outside Hydraulics
Saws
Marvel Series 8 Model Mark II Universal Vertical Band Saw, s/n 826871
Drills
Arboga 20” Model A59 Drill, s/n 67266, T-Slot Table
Delta 17” 4-Spindle Drill with 3-Procunier Tapping Heads, Production Table
Delta 17” 4-Spindle Drill, Production Table
Toolroom Machines
DoAll 13”x48’ Toolroom Lathe, s/n 0256850-163, 2500 RPM Spindle, Inch/MM Threading, 3-4-6 Jaw Chucks, Collet Closer
Sunnen Model MBB-1600 Precision Honing Machine, s/n 41220 with Hone Tooling Separately Available
Beere Tipshear
Plant Equipment
Large Quantity Steel & Aluminum Bar Stock
Atlas Copco 15 HP Model GX11FF Screw Type Air Compressor, s/n CAI296769 (New 2008), 19,633 Hours on Meter
10 HP “Y-Type” Tank Mounted Air Compressor
Pneumatech Model ADA-40 Turbo V Dryer, s/n 9301-T1-886-ST
Trinco Model 36/BP Shot Blast Cabinet, s/n 63718-06
Mr Deburr Deburring Mill
Ranch King Pro 16.5 HP/42” Riding Lawn Mower
Murray 8 HP/24” Electric Start Snow Thrower
Misc. Plant Equipment Including Safety Kleen Parts Washer*Vises*Collets*Arbor Press*Belt & Disc Sanders*Carbide Double End Tool Grinder*Double End Tool Grinders*Lista Tool Cabinets*Ladders*Cantilever Racks*C-Clamps*Hand Trucks*Etc.
Inspection
Brown & Sharpe Model Microval Coordinate Measuring Machine, s/n 110383, 21-1/2”x29-1/2” Granite Table, Renishaw TP1S Probe, Micro Measure III Software
Deltronic 14” Model DH214 Optical Comparators, s/n 259114336, with 612-R DRO
Deltronic 14” Model DH214 Optical Comparators, s/n 229062846, with MPC-4 DRO
Acco Wilson Model 3JR Rockwell Hardness Tester, s/n 12477-981
Sunnen 2”-6” Model CF-1126 Gage Setting Fixture
Sunnen 0-2” Model CF-502 Gage Setting Fixture
Material Handling
Hyster 4,000 LB Model 40C LP Gas Forklift Truck, s/n CC02D17341U, 167.5” Max. Lift, 4402 Hours on Meter
Vestil 1,000 LB. Lift
Economy Electric Lift
Offices
Xerox Model XC830 Copier,Desks,File Cabinets,Drafting Table,Conference Table,Chairs,File Cabinets,Etc.
BidSpotter Customer Service Support Department
Have a question pertaining to the bidding process?
Visit our Frequently Asked Questions!
You can also start a live chat with a Bidspotter Support Representative by selecting Live Chat at the top of Bidspotter.com. More information on our chat system can be found by clicking here.
Customer Support Hours:
Email: support@bidspotter.com
Office: (253) 858-6777 Toll Free: (866) 597-2437
Please note our deposit requirements for bidders with no bidspotter bidder history or bidder history with any negative feedback:
Insufficient Bidspotter history
Due to your insufficient Bidspotter history we may require a deposit up to $500.00 USD (refundable) before you can be approved to bid. By registering to bid for this sale, you are giving us the right to pre-authorize a deposit of $500.00 USD. This pre-authorization is immediately refundable if you do not purchase anything, or if you choose to make other payment arrangements. Once you have established a sufficient positive Bidspotter history you will not have to deposit in order to get approved.
Bidspotter history with negative feedback
Due to your Bidspotter history we will require a $2,500.00 USD deposit (refundable) before you can be approved to bid. By registering to bid for this sale, you are giving us the right to pre-authorize a deposit of $2,500.00 USD. This pre-authorization is immediately refundable if you do not purchase anything, or if you choose to make other payment arrangements. Once you have established a sufficient positive Bidspotter history you will not have to deposit in order to get approved.
All Bidders
Everything will be sold to the highest bidders for cash, in accordance with our standard Terms of Sale which can be found on our web site at www.heathindustrial.com or by requesting a copy of our terms and conditions of sale by email to auctions@heathindustrial.com.
Your bid is a contract: Place a bid only if you are serious about buying the item. If you are the high bidder, you will enter into a legally binding contract with Heath Industrial. All bids are in US dollars.
A Buyers Premium will be added to all items sold. Heath Industrial makes every attempt to accurately describe all items at the auction sale, there are always possibilities of errors occurring which is out of our control. It is important to know this fact if you plan on placing a Proxy Bid or if you plan on bidding via bidspotter.com.
Please inspect before you bid and remember, everything is sold AS IS, WHERE IS with absolutely no warranty or guarantee of any kind, either written or implied.
Payments can be via company check, cash, or wire transfer. Credit Cards are accepted for an additional fee. All successful bidders will receive their invoices via email from Heath Industrial after the last day of the auction sale.
All successful bidders will be responsible for sales taxes which may be added to your invoice unless an exemption certificate is supplied prior to invoicing.
Heath Industrial reserves the right to automatically charge payment card on file with bidspotter.com, for any and all outstanding invoices not paid within 48 hours after the close of the auction.
Removal:
Rigging and removal is the responsibility of the buyer. Small items that can be carried out should be removed immediately after the auction or at the latest, the day after the auction. All riggers or buyers who will be removing items using any powered vehicle will need to provide a certificate of insurance that is acceptable to Heath Industrial. Removal will begin when the auction sale has been completed and payment in full has been received.
If you need assistance please call us at our corporate offices @ 847-380-1755 or via email at auctions@heathindustrial.com