Fristam 10 HP Centrifugal Pump with Baldor 3,490 RPM S/S Clad Motor with 2" x 2.5" S/S Head, Clamp Type and Hubbell Disconnect

S/S Balance Tank with Spray Ball and Level Sensor

S/S Balance Tank with Spray Ball and Level Sensor

(2) 2" S/S Online Filters and (4) 2" S/S Ball Check Valves, Clamp Type

Rosemount 1.5" Flow Meter, Model 8721ASA015UA4NO, Clamp Type

Waukesha Cherry Burrell 2", 2.5"and 3" Air Valves

Waukesha Cherry Burrell 2" and 3" Air Valves

Waukesha Cherry Burrell 3" Air Valves

(31) Air Valve Solenoids with S/S Enclosure

50'+ 2"-3" S/S Pipe with Clamps, Elbows and Blow Downs (Located in Front and Below 2,000 Gallon Processors Only)

APV S/S Plate Heat Exchanger, Model R56SH/200, S/N 23657, with (1) Divider

Alfa Laval S/S Plate Heat Exchanger, Model M6-MFHG, S/N 30104-98871 with (2) Dividers, Snap-in Gaskets and Air Actuated Ball Valve

AGC S/S Plate Heat Exchanger, Model Prohx-SH, S/N 99177

(4) 2" S/S Online Filters with (4) Waukesha Cherry Burrell Air Valves, Pressure Gauges, Rack and S/S Clamps

(2) 2" S/S Online Filters with (4) Waukesha Cherry Burrell Air Valve Pressure Gauges, Rack and S/S Clamps

Tri Blender with 1 HP Motor, Mounted on Portable S/S Cart

Ampco Positive Displacement Pump with 1.5" x 1.5" S/S Head, Clamp Type, Mounted on S/S Frame with Hubbell Disconnect

1.5" Micro Motion Flow Meter, Model H1005138N0BAE222, Clamp Type

Fristam 7.5 HP Centrifugal Pump with Baldor 3,525 RPM S/S Clad Motor, Model FPR742, with 2" x 2.5" S/S Head, Clamp Type and Hubbell Disconnect

Fristam 10 HP Centrifugal Pump with Baldor 3,500 RPM S/S Clad Motor, Model F53522, with 2" x 2.5" S/S Head, Clamp Type and Hubbell Disconnect

Waukesha Cherry Burrell and Tri Clover 2" S/S Air Valves, Clamp Type

ESP-Link RTD Sensor

150 Gallon S/S Hinged-Lid Tank with Tri Clover and Koltek S/S 3-Way Valves

Anderson DART Pressure Read Out with (22) Air Valve Solenoids and S/S Enclosure

2009 Allen Bradley Connect System with (13) I/O Cards, Power Supply and S/S Enclosure

Tetra Alex 30 Homogenizer, Model TAM30/160B, S/N 15844553368, and S/S Safety Switch

Anderson Chart Recorder, Model AV-9000

AGC S/S Plate Heat Exchanger, Model Pro31-H, S/N 08217, with (1) Divider and Hydraulic Open and Close Rigging: 1500

Mojonnier All S/S Heater, Model 32, S/N 603

Tri Clover 2.5" Flow Diverter Valve Set with Controller

Anderson DART Differential Pressure Read Out with (2) RTD Sensors

2" S/S Holding Tube with (2) Flow Trend Air Valves

Anderson Chart Recorder, Model AV-9000

S/S Rectangular Balance Tank with Tri Clover 3-Way Plug Valve

Ampco Positive Displacement Pump with 2.5" S/S Head, Clamp Type, Mounted on S/S Frame with Hubbell Disconnect, S/N 1211264, 480 Volts,

Ampco 5 HP Centrifugal Pump with Baldor 3,450 RPM S/S Clad Motor and 2.5" x 2" S/S Head, Clamp Type

Anderson RTD Sensor

11' S/S Wash Trough with Tri Clover Pump, Hubbell Disconnect and Anderson AV 9000 Chart Recorder

S/S Hose Reel

S/S Hose Reel

S/S Hose Reel

Hewlett Packard Personal Computer with Strongarm S/S Enclosure

Alfa Laval CIP Separator, Model HMRPX418, with (4) S/S Air Valves, Starter and Separator Tooling Rigging: 3000 ...[more]

Alfa Laval S/S CIP Separator Model MRPX418TVG-74C, S/N 2967062 (No Motor) ...[more]

CM 1 Ton Electric Chain Hoist with Boom

Ampco 15 HP Centrifugal Pump with Baldor 3,450 RPM Motor and 2" x 2.5" Head, Clamp Type

50 Gallon S/S Tank

Walker 20,000 Gallon Jacketed ALL 316 S/S Silo, 12' W, Model VSHT, S/N SPG33010 with Horizontal Agitator, Tri Clover Air Valve and RTD Level Senso...

Walker 20,000 Gallon Jacketed ALL 316 S/S Silo, Model VSHT, S/N SPG33011 with Horizontal Agitator, Tri Clover Air Valve and RTD Level Sensor, 12' ...

Mueller 20,000 Gallon Jacketed ALL S/S Silo, Model SVW, S/N 300760-1, with Horizontal Agitator, (2) Waukesha Cherry Burrell Air Valves and RTD Sen...

Mueller 20,000 Gallon Jacketed S/S Silo, Model SVW, S/N D-34572-1, with Horizontal Agitator, S/S Clad Motor, (1) Tri Clover Air Valve and RTD Sens...

Ampco Positive Displacement Pump with Baldor 5 HP Motor, 3" x 3" S/S Head, Clamp Type, Mounted on S/S Base with Hubbell Disconnect

Ampco Positive Displacement Pump with Sew Euro Drive Motor, 3" x 3" S/S Head, Clamp Type, Mounted on S/S Base with Hubbell Disconnect

2.5" S/S Online Filter, Waukesha Cherry Burrell Air Valve and Anderson RTD Sensor

2.5" S/S Online Filter, Tri Clover Air Valve and Ball Check Valve

Ampco 3 HP Centrifugal Pump with Baldor 1,750 RPM Motor, 3" x 2" S/S Head, Clamp Type and Hubbell Disconnect

Tri Clover 5 HP Pump with Reliance 1,745 RPM Motor, 1.5" x 3" S/S Head, Clamp Type and Hubbell Disconnect

Waukesha Cherry Burrell, Tri Clover and other 2" S/S Air Valves in Manifold with Solenoid Panel

Waukesha Cherry Burrell 2.5" S/S Air Valves, in Manifold

2" S/S Air Valves in Manifold