32
UVA Sweden U80GL23 CNC ID Grinder
1/11
Passed
Dunedin, Florida
7,00%
19,00%
Descripción
EQUIPNET LISTING #988014
DESCRIPTION: UVA Sweden U80GL23 CNC ID Grinder
UVA high precision ID grinders are made in Sweden. They are found within the automotive and aviation industry as well as specialized applications in areas of transmission, engines, and hydraulics. This machine type usually grinds a bore (ID) sizes 4.000 mm to 18.000 mm, Seat angles 15° – 130° and a Face/OD grinding operation or a combination thereof. Tolerances are typically in the micron (0.001mm) range. Surface finishes are 0.2RA or better.
UVA Model: UVA-1 U80 GL23, Handload.
Full Enclosure.
Year build 1994 and refurbished 2018-today.
CNC Controller:
UVA-tronic 1 -- control unit is obsolete and cannot be restored; however, CNC control upgrades are available. KHC can assist if the customer chooses. The control cabinet (enclosure) to install a non-UVA control upgrade is included.
Control voltages: 5 Vdc, 12 Vdc, 24 Vdc, 24 Vac, 110/220 Vac.
Servo Driven Tables with Linear and circular interpolation, AC servo motors.
Position accuracy: 1 micron; with upgraded control 0.1 micron.
Machine Base GL-type layout:
(4) UVA precision slides (three [3] 250mm table and one 50mm top slides). All precision slides are either rebuilt or verified to mfg. standard.
(1) UVA #5 Work head spindle, including new bearings and drive motor.
(2) New “Spindel Electronic”, High frequency (HF) drives for grinding spindles.
(1) 100,000-RPM UVA High Frequency (HF) Grinding Spindles – certified.
(1) 150,000-RPM UVA HF Grinding Spindle – not certified.
(2) 90,000-RPM Gamfior HF Grinding Spindles – certified.
(1) 75,000-RPM Gamfior HF Grinding Spindle – not certified.
(1) 60,000-RPM UVA HF Grinding Spindle – not certified.
Others:
All subcomponents like pneumatic cabinet and lubrication units are clean and functional.
Some Original Manuals available.
Grinding Coolant tank is available.
The machine is not available for demonstration at its current state.
If a UVA control upgrade is purchased, new servo motors, adapters and cables, control cabinet and cable tunnel are usually provided – cost basis about $300k.
What needs additionally purchased or restored to revive this machine: Spindle chiller and tank, possibly a face grinding spindle, HF spindle Cables, pneumatic lines, solenoid, sensor cables, sensors, dress tools, and miscellaneous material.
KHC works with a US company specializing in CNC refurbishing. They adapt Fanuc controls at significantly lower cost.
Amoladora CNC UVA Sweden U80GL23
Las amoladoras ID de alta precisión UVA se fabrican en Suecia. Se encuentran en la industria automotriz y de aviación, así como en aplicaciones especializadas en áreas de transmisión, motores e hidráulica. Este tipo de máquina generalmente rectifica tamaños de orificio (DI) de 4000 mm a 18000 mm, ángulos de asiento de 15° a 130° y una operación de rectificado de cara/exterior o una combinación de las mismas. Las tolerancias suelen estar en el rango de micras (0,001 mm). Los acabados superficiales son 0,2RA o mejores.
Modelo UVA: UVA-1 U80 GL23, carga manual.
Recinto completo.
Año de construcción 1994 y reformado en 2018, hoy.
Controlador CNC:
UVA-tronic 1 -- la unidad de control está obsoleta y no se puede restaurar; sin embargo, hay disponibles actualizaciones de control CNC. KHC puede ayudar si el cliente así lo desea. Se incluye el gabinete de control (caja) para instalar una actualización de control que no sea UVA.
Tensiones de control: 5 Vcc, 12 Vcc, 24 Vcc, 24 Vac, 110/220 Vac.
Mesas Servoaccionadas con interpolación lineal y circular, servomotores AC.
Precisión de posición: 1 micrón; con control mejorado de 0,1 micras.
Disposición tipo GL de la base de la máquina:
(4) diapositivas de precisión UVA (tres [3] diapositivas de mesa de 250 mm y una diapositiva superior de 50 mm). Todas las diapositivas de precisión se reconstruyen o se verifican según mfg. estándar.
(1) Husillo del cabezal de trabajo UVA n.° 5, incluidos cojinetes y motor de accionamiento nuevos.
(2) Nuevos “Spindel Electronic”, accionamientos de alta frecuencia (HF) para husillos rectificadores.
(1) Husillos de rectificado de alta frecuencia (HF) UVA de 100 000 RPM: certificados.
(1) Husillo de rectificado UVA HF de 150 000 RPM: no certificado.
(2) Husillos de rectificado Gamfior HF de 90 000 RPM: certificados.
(1) Husillo de rectificado Gamfior HF de 75 000 RPM: no certificado.
(1) Husillo de rectificado UVA HF de 60 000 RPM: no certificado.
Otros:
Todos los subcomponentes, como el gabinete neumático y las unidades de lubricación, están limpios y funcionales.
Algunos manuales originales disponibles.
El tanque de refrigerante de molienda está disponible.
La máquina no está disponible para demostración en su estado actual.
Si se compra una actualización de control UVA, generalmente se proporcionan nuevos servomotores, adaptadores y cables, gabinete de control y túnel para cables, con un costo aproximado de $300 000.
Lo que se necesita comprar o restaurar adicionalmente para reactivar esta máquina: tanque y enfriador de husillo, posiblemente un husillo de rectificado frontal, husillo de alta frecuencia Cables, líneas neumáticas, solenoides, cables de sensores, sensores, herramientas de rectificado y material diverso.
KHC trabaja con una empresa estadounidense especializada en reacondicionamiento de CNC. Adaptan los controles Fanuc a un costo significativamente menor.
REMOVAL COST: $0
MORE INFORMATION: https://www.equipnet.com/auctions/uva-sweden-u80gl23-cnc-id-grinder-listid-988014/
DESCRIPTION: UVA Sweden U80GL23 CNC ID Grinder
CNC Controller:
Machine Base GL-type layout:
Others:
Amoladora CNC UVA Sweden U80GL23
Controlador CNC:
Disposición tipo GL de la base de la máquina:
Otros:
REMOVAL COST: $0
MORE INFORMATION: https://www.equipnet.com/auctions/uva-sweden-u80gl23-cnc-id-grinder-listid-988014/
Auction Details
Rigging/Removals
T&Cs & Important Info
Ask seller a question
EQUIPNET LISTING #988014
DESCRIPTION: UVA Sweden U80GL23 CNC ID Grinder
UVA high precision ID grinders are made in Sweden. They are found within the automotive and aviation industry as well as specialized applications in areas of transmission, engines, and hydraulics. This machine type usually grinds a bore (ID) sizes 4.000 mm to 18.000 mm, Seat angles 15° – 130° and a Face/OD grinding operation or a combination thereof. Tolerances are typically in the micron (0.001mm) range. Surface finishes are 0.2RA or better.
UVA Model: UVA-1 U80 GL23, Handload.
Full Enclosure.
Year build 1994 and refurbished 2018-today.
CNC Controller:
UVA-tronic 1 -- control unit is obsolete and cannot be restored; however, CNC control upgrades are available. KHC can assist if the customer chooses. The control cabinet (enclosure) to install a non-UVA control upgrade is included.
Control voltages: 5 Vdc, 12 Vdc, 24 Vdc, 24 Vac, 110/220 Vac.
Servo Driven Tables with Linear and circular interpolation, AC servo motors.
Position accuracy: 1 micron; with upgraded control 0.1 micron.
Machine Base GL-type layout:
(4) UVA precision slides (three [3] 250mm table and one 50mm top slides). All precision slides are either rebuilt or verified to mfg. standard.
(1) UVA #5 Work head spindle, including new bearings and drive motor.
(2) New “Spindel Electronic”, High frequency (HF) drives for grinding spindles.
(1) 100,000-RPM UVA High Frequency (HF) Grinding Spindles – certified.
(1) 150,000-RPM UVA HF Grinding Spindle – not certified.
(2) 90,000-RPM Gamfior HF Grinding Spindles – certified.
(1) 75,000-RPM Gamfior HF Grinding Spindle – not certified.
(1) 60,000-RPM UVA HF Grinding Spindle – not certified.
Others:
All subcomponents like pneumatic cabinet and lubrication units are clean and functional.
Some Original Manuals available.
Grinding Coolant tank is available.
The machine is not available for demonstration at its current state.
If a UVA control upgrade is purchased, new servo motors, adapters and cables, control cabinet and cable tunnel are usually provided – cost basis about $300k.
What needs additionally purchased or restored to revive this machine: Spindle chiller and tank, possibly a face grinding spindle, HF spindle Cables, pneumatic lines, solenoid, sensor cables, sensors, dress tools, and miscellaneous material.
KHC works with a US company specializing in CNC refurbishing. They adapt Fanuc controls at significantly lower cost.
Amoladora CNC UVA Sweden U80GL23
Las amoladoras ID de alta precisión UVA se fabrican en Suecia. Se encuentran en la industria automotriz y de aviación, así como en aplicaciones especializadas en áreas de transmisión, motores e hidráulica. Este tipo de máquina generalmente rectifica tamaños de orificio (DI) de 4000 mm a 18000 mm, ángulos de asiento de 15° a 130° y una operación de rectificado de cara/exterior o una combinación de las mismas. Las tolerancias suelen estar en el rango de micras (0,001 mm). Los acabados superficiales son 0,2RA o mejores.
Modelo UVA: UVA-1 U80 GL23, carga manual.
Recinto completo.
Año de construcción 1994 y reformado en 2018, hoy.
Controlador CNC:
UVA-tronic 1 -- la unidad de control está obsoleta y no se puede restaurar; sin embargo, hay disponibles actualizaciones de control CNC. KHC puede ayudar si el cliente así lo desea. Se incluye el gabinete de control (caja) para instalar una actualización de control que no sea UVA.
Tensiones de control: 5 Vcc, 12 Vcc, 24 Vcc, 24 Vac, 110/220 Vac.
Mesas Servoaccionadas con interpolación lineal y circular, servomotores AC.
Precisión de posición: 1 micrón; con control mejorado de 0,1 micras.
Disposición tipo GL de la base de la máquina:
(4) diapositivas de precisión UVA (tres [3] diapositivas de mesa de 250 mm y una diapositiva superior de 50 mm). Todas las diapositivas de precisión se reconstruyen o se verifican según mfg. estándar.
(1) Husillo del cabezal de trabajo UVA n.° 5, incluidos cojinetes y motor de accionamiento nuevos.
(2) Nuevos “Spindel Electronic”, accionamientos de alta frecuencia (HF) para husillos rectificadores.
(1) Husillos de rectificado de alta frecuencia (HF) UVA de 100 000 RPM: certificados.
(1) Husillo de rectificado UVA HF de 150 000 RPM: no certificado.
(2) Husillos de rectificado Gamfior HF de 90 000 RPM: certificados.
(1) Husillo de rectificado Gamfior HF de 75 000 RPM: no certificado.
(1) Husillo de rectificado UVA HF de 60 000 RPM: no certificado.
Otros:
Todos los subcomponentes, como el gabinete neumático y las unidades de lubricación, están limpios y funcionales.
Algunos manuales originales disponibles.
El tanque de refrigerante de molienda está disponible.
La máquina no está disponible para demostración en su estado actual.
Si se compra una actualización de control UVA, generalmente se proporcionan nuevos servomotores, adaptadores y cables, gabinete de control y túnel para cables, con un costo aproximado de $300 000.
Lo que se necesita comprar o restaurar adicionalmente para reactivar esta máquina: tanque y enfriador de husillo, posiblemente un husillo de rectificado frontal, husillo de alta frecuencia Cables, líneas neumáticas, solenoides, cables de sensores, sensores, herramientas de rectificado y material diverso.
KHC trabaja con una empresa estadounidense especializada en reacondicionamiento de CNC. Adaptan los controles Fanuc a un costo significativamente menor.
REMOVAL COST: $0
MORE INFORMATION: https://www.equipnet.com/auctions/uva-sweden-u80gl23-cnc-id-grinder-listid-988014/
DESCRIPTION: UVA Sweden U80GL23 CNC ID Grinder
CNC Controller:
Machine Base GL-type layout:
Others:
Amoladora CNC UVA Sweden U80GL23
Controlador CNC:
Disposición tipo GL de la base de la máquina:
Otros:
REMOVAL COST: $0
MORE INFORMATION: https://www.equipnet.com/auctions/uva-sweden-u80gl23-cnc-id-grinder-listid-988014/
Multi-Location Event! Machine Tools, Fabrication Machinery, Plant Utilities, Converting Equipment, Packaging Equipment, MRO and More!
Finaliza desde
General delivery information available from the auctioneer
- Removal & Loading (Handling fees) are noted where provided by the vendors - these charges will appear on the buyers final invoice. Please see item description for more details/cost. Additional Services like skidding/crating and shipping can be quoted to winning bidders after their initial equipment invoice has been paid as a service option.
Información importante
Multi-Location Event! Machine Tools, Fabrication Machinery, Plant Utilities, Converting Equipment, Packaging Equipment, MRO and More! : Paper Converting Equipment, Blow Molders, CNC Grinders, Milling Machines, Bridge Cranes, Boilers, 3D Printers, Hoists, Ultrasonic Welders and More!
=====================================================
BidSpotter Customer Service Support Department
Have a question pertaining to the bidding process?
Visit our Frequently Asked Questions!
You can also start a live chat with a Bidspotter Support Representative by selecting Live Chat at the top of Bidspotter.com. More information on our chat system can be found by clicking here.
Customer Support Hours:
- Monday – Friday, 8:00 AM ET – 8:00 PM ET
Email: support@bidspotter.com
Office: 253-858-6777 Toll Free: 866-597-2437
Condiciones
EquipNet, Inc. Auction Terms
- **Tax % due to change depending on location of equipment and buyer location.
- All auction equipment is subject to internal redeployment, cancellation of listing, or other sale prior to formal acceptance of an auction bid by the seller.
-
- All bids are binding. Once bids are submitted you cannot remove or modify them, although you can place additional bids. If you make a mistake in your bid, please call our hotline and a Sales Representative will assist you.
- All items, unless otherwise stated, are sold “As Is, Where Is, With All Faults”.
- The sale of equipment is intended to be sold without software or other proprietary intellectual property including but not limited to manuals (“Software”), if any is applicable.
- Handling Fees: are noted where provided by the vendors. Please see item description for more details. This is the cost to get the item from its location to an area where it can safely be loaded (unless otherwise noted). Packaging and Shipping are additional and can be provided once your equipment invoice has been paid.
- Buyer's Premium is 19% - The premium is a percentage of the final price of a listing (item) that is in addition to the equipment sale price. For example, if an auction charges a buyer’s premium of 19% for amounts below $1,000, you will be required to pay an additional $190 for a lot totaling $1,190.
- Taxes / VAT: Sales tax may be applied to your purchase, depending on your state and exemption status. If no sales tax is applied to your order, check your state's sales and use tax requirements as you may be required to self-assess any tax required.
- Your invoices are sent via email initially and can also be viewed from the My EquipNet section of the website. Our payment instructions can be found at the bottom of your invoice. Acceptable payment Methods include credit card with a max of $10,000 USD (Visa, MasterCard, Discover, AmEx), otherwise Wire Transfer ONLY. EquipNet DOES NOT accept checks, PayPal or PO's as payment. All invoices must be paid within (5) days of receipt of invoice.
- Invoices must be paid in full before shipping/pick-up arrangements can be made. Once paid in full, a member of the EquipNet Logistics department will contact you regarding your freight quote.
- All items must be removed within the specified removal period or shall be deemed abandoned and resold by EquipNet, Inc. All quotes must be obtained after the auction has concluded and the item(s) have been paid for. Abandoning items can result in being banned from future bidding.
