(3) Milling cutters, assorted shell end mill cutter.

(3) Steel marking stamps, 1/16 inch, 3/32 inch, 1/8 inch, letters.

(9) Recoil thread repair kits, various sizes.

Assorted reamers and multi tool.

Insert fly cutter, insert type, 3 inch, with R8 spindle adapter, includes inserts.

(5) Assorted milling cutters, various sizes.

Ames precision portable hardness tester, model 2S, serial number 12025, with gauge blocks, in wooden case.

Heli coil, coil repair

Darex drill bit sharpener, model 2, serial number 41049L, 1/2 horsepower, 115 V, 1/16 through 3/4 inch, mounted on base.

Kennedy tool maker cabinet, top and bottom cabinets, overall appears to be in good condition.

High speed sliding saw mill cutters, various sizes and types.

Criterion boring head, Michael DBL - 202B, with R8 shank.

Assorted mill cutters various types sizes and kinds.

Assorted corner rounding end mills, new in the box, various sizes and types.

Flynn boring head model 30A, R8 collet.

Federal dial snap gauge, model 1000P - 1 with dial indicator model B5MC,.0005 inch fully jeweled, 0-1 1/8.

MHC surface plate, 2 ledge, 18“ x 24“ x 3“

Jacobs drill chuck, 14N 0-1/2”, R8 collet.

Geared head lathe, Clausing Colchester 15 inch, serial number 6/0055/33568DD, 15 inch swing, 50 inch centers, power longitudinal feed, power C...

Shell mill holder , 1 inch shank, R8 collet.

Brown and Sharpe height gauge, model 586, 26 inch, with wooden box.

Alliant horizontal milling attachment assembly, consisting of a right angle attachment, outboard support, and milling arbor, all pieces are new....

Albrecht drill chuck, 1/32 up to 1/2 inch, R8 collet.

(65) 5 C collets, sizes range from 1/16” upto 1 1/16”, increments by 1/64 of an inch, most all are new

Assorted straight flute reamers, English and metric, various sizes and types. All our high-speed steel.

Precision live center set with 7 inter changeable center hands, limited usage, 4MT.

Aloris quick change tool post tool changer, includes eight adapters, CXA1, CXA2, CXA7, CX A8, CXA10, CXA41 with boring bar.

Stub Milling Arbor, R8 Collett, 1 inch, limited usage.

Brown & Sharpe surface grinder, serial number 523–6 183–8118, 230 V three phase, 6“ x 18“ magnetic chuck, semi automatic, coolant, manual downf...

Metric 5C round collects with Collett stop.

Assorted boring bars, 3/4” shank.

Assorted hex set screws.

Assorted carbide saws, with saw holder, R8 shank.

Jacobs drill chuck, Model 18N capacity 1/8 inch up to three-quarter inch, MT4 taper.

(2) V blocks, 1 3/4” x 2 3/4”.

Assorted heli coil repair kits., 8-32NC, 10-32NF, 1/4-28NF, 1/2-20NF, 1/8-27NPT, 1/4-18NPT

Assorted grinding wheels, various sizes and types.

(10) Assorted 5C square collects, ranging from 3/16” up to 3/4”, most are in new condition. Includes the boxes.

Dake H frame press model 75H, serial number 154527, 44 inches between the uprights, adjustable bed, manual hydraulics, 3’ adjustable bed, does ...

Assorted boring bars, 1/2“ shank, carbide tipped.

Brown & Sharpe height gauge, model 585 19 inch with wooden box. ...[more]

Assorted carbide cutters, various sizes and types.

Assorted bandsaw blades in the coil packet, 3/8” 1/4” 1/2”.

Concentric live center.

Demagnetizer, model TC -50, 110 V, 4 1/2 x 6 1/2.

Kurt machinist vice, model D60, serial number 034754, 6 inch, with handle, no swivel base.

Troyke Mfg Co Rotary table, model R -12, lot number 22781, 12 inch, single axis, in good condition.

Cushman 12 inch Lathe Chuck, 4-jaw model, 3 1/2 inch spindle bore, includes chuck key, reversible jaws, purchased new, in very good condition.

THERMCRAFT Heat Treat Oven, model 12 - 20 - 12BX, serial number 91303, 230 V, 1PH, 22 A, 5000 W, maximum temperature 20 to 150°, the inside cav...

Vermont gauge company pin gauge set, three drawers, .0110-.6250, all are plus size, includes the four drawer cabinet. Surface rust is apparent ...

MCH black granite surface plate, 18“ x 24“, two ledge, 3 inch thick, has good appearance.

(3) Justrite rag cans, foot operated lids, 6 gallon capacity, model 09100/09110.

Powermate 3 gallon capacity, includes 2 bags of abrasive blasting crystals, the blast part is in good condition.

Kennedy toolbox riser.

Union Carbide arc welder, utility welder 230, primary voltage 208/230, single phase, secondary voltage 80 V maximum, current 40- 230 A, duty c...

CM 1/2 ton capacity, includes dolly, model E, half horsepower, 16 ft./min., 440 - 480/3/60, convertible to 200 -240/3/60, serial number 10899B....

Shop built dolly cart, constructed of stainless steel, 4 caster 18“ x 30“, very low clearance.

Portable shop built A frame gantry, 10 foot left to right 5 foot front to back 100 inches height, top I-beam is bolted to the A-frame ends, cas...

Suburban radius dresser, model MG - 5CV – S1, serial number 5139 -9905, this was purchased new with limited usage it’s in near new condition with...

Craftsman toolbox and chest consisting of four drawer tool chest on 4 casters, includes one toolbox with three drawers, one toolbox with seven ...