DoAll Model ML, 16" Vertical Contour Metal Cutting Band Saw, S/n 4611530, 24" x 24" Work Surface, Work Light, with Cabinet, Blades and Attachments...

Boehringer Goppingen 18" Geared Head Engine Lathe, S/n N/a, 24" 4-Jaw Chuck, 2-Position Tool Post, Tail Stock with Live Center, (Machine Shop)

Lot - (3) Steady Rests, (1) 28" Face Plate, (1) 16" 4-Jaw Chuck, (1) 14" 4-Jaw Chuck, (1) 10" 3-Jaw Chuck, with Stand, (Machine Shop)

Axelson Model 16, 16" x 78" Geared Head Engine Lathe, S/n N/a, 12" 3-Jaw Chuck, Aloris 2-Position Tool Post, Tail Stock, Work Light, (Machine Shop)

Lot - (2) Steady Rests, (1) 15" 4-Jaw Chuck, (1) 12" 3-Jaw Chuck, (1) 10" 4-Jaw chuck, (2) Face Plates, (2) Back Plates, and Stand, (Machine Shop)

Clausing Colchester 17" Geared Head Engine Lathem S/n 7/0057/09878, 12" 3-Jaw Chuck, Aloris 2-Position Tool Post, (2) Steady Rests, Tail Stock, Ba...

Kysor Johnson Model M-12, 9" x 12" Horizontal Metal Cutting Band Saw, S/n 1063, with 12" x 14' Infeed Roller Conveyor, (Machine Shop)

Covel style No. 12, Hand Feed Surface Grinder, S/n 12-40, (Machine Shop)

Miller SRH-555, 500-Amp Capacity DC Portable Arc Welding Power Source, S/n HD665360, with Leads, (Machine Shop)

Lincoln Electric Ranger 250 GXT, 250-Amp Capacity, Gas Powered Portable Stick Welder Machine, S/n N/a, with Leads; 870.2 Hours (At Time of Descrip...

Miller Legend 302, 300-Amp Capacity CC CV DC Gas Powered Portable Arc Welding Power Source, S/n LH1409680, (Machine Shop)

Miller Gold Star 500 SS, 500-Amp Capacity CC DC Arc Welding Power Source, S/n KC245847, Portable, with Leads, (Machine Shop)

Miller Deltaweld 451, 450-Amp Capacity CV DC Mig Welding Power Source, S/n KA750327, with Miller S-52E Wire Feeder, Portable, with Leads, (Machine...

Miller SRH-555 (S), 500-Amp Capacity DC Arc Welding Power Source, S/n S414103, with Leads, Portable, (Mill Bldg)

Miller SRH-333, 300-Amp Capacity DC Arc Welding Power Source, S/n 1452638, (Rolls Tool Room)

Sioux (Fuel Source Unknown) Portable Hot Pressure Washer, with Hose and Wand, (Machine Shop)

Ridgid 802 Pipe Threading Machine, S/n 815831, with Pipe Cutter, (5) Thread Dies and Debur, Portable, (Machine Shop)

Erie C-Frame Forging Hammer Press, S/N 59113; Base Measurement: 70 in. x 43 in. (Machine Shop) ...[more]

No Name Custom Fabricated Horizontal Press, 14' Overall Length, 3' Wide, (Machine Shop)

Kasto HBA 360 AU, 10" x 14" Horizontal 2-Post Horizontal Metal Cutting Band Saw, S/n N/a, with 20" x 24' Infeed Roller Conveyor, 24" x 25' Motoriz...

Youngstown Foundry and Machine Co. 24" Geared Head Block Lathe, S/n N/a, 20-HP, (Rolls Tool Room)

Crawford-Swift 24" Geared Head Engine Lathe, S/n N/a, 22" 4-Jaw Chuck, Tail Stock, Tracer Attachment, 40-HP, (Asset 6363), (Rolls Tool Room)

LeBlond 4025, 42" x 36" Heavy Duty Geared Head Engine Lathe, S/n N/a, 36" 4-Jaw Chuck, Tail Stock (Not Operational) (Asset 6361) (Rolls Tool Room)...

United Geared Head Block Lathe, (Used for Turning Rolls), (Asset 6357), (Rolls Tool Room)

United Geared Head Block Lathe, (Used for Turning Rolls), (Asset 6358), (Rolls Tool Room)

United Geared Head Block Lathe, (Used for Turning Rolls), (Asset 6359), (Rolls Tool Room)

U.S. Electrical 16" Double End Pedestal Type Grinder, S/n N/a, (Rolls Tool Room)

Baldor Cat. No. 1021WD, 10" x 1 1/2-HP Double End Pedestal Type Grinder, S/n P498, (Rolls Tool Room)

Setco Model 103, 12" x 3-HP Double End Pedestal Type Grinder, S/n N/a, (Rolls Tool Room)

No Name 7" Diameter Opening Pass Thru Demagnetizer with Stand, (Rolls Tool Room)

Sheldon Cat. No. WM-56-P, 13" Geared Head Engine Lathe, S/n WM-28498, 6" 3-Jaw Chuck, Tool Post, Tail Stock, (Rolls Tool Room)

Rockwell/Delta 14" Vertical Contour Metal Cutting Band Saw, S/n N/a, 14" x 14" Work Surface, Work Light, (Rolls Tool Room)

Craftsman Model 34984, 15" Floor Standing Drill Press, S/n XY130403001, 11 1/2" Diameter Work Surface, (Rolls Tool Room)

Setco Approximately 12" x 3-HP Double End Pedestal Type Grinder, S/n N/a, (Rolls Tool Room)

Standard 14" x 3-HP Double End Pedestal Type Grinder, S/n N/a, (Mill Bldg)

Wilton 6" Swivel Machinist Vise with Stand, (Rolls Tool Room)

Baldor 6" x 1/2-HP Double End Pedestal Type Grinder, (Mill Bldg North End)

Cadet Model 106, 12" x 3-HP Double End Pedestal Type Grinder, S/n N/a, (Mill Bldg North End)

No Name 6" x Approximately 1/3-HP Double End Pedestal Type Grinder, S/n N/a, (Mill Bldg Middle)

North American 40-Ton Per Hour Re-Heat Furnace, Pusher Type, Natural Gas Fired, Maximum 15' Wide Billet, Drop Down Discharge onto Conveyor, Screen...

Infeed Conveyor to Rougher Operation, (2) 3-High Roughers, (1) is 700-HP AC Synchronous Motor, (1) is 700-HP AC Asynchronous, Total of (6) Passes,...

Roll Feed Line to the Intermediate Mill Stands and Finishing Mill Stands, Including a Flying Crop Shear (Sold, Subject to Bulk Bid, Lot #: 212A) (...

Lot - Infeed Conveyor, (5) Intermediate Roll Stands Consisting of: (1) 300-HP, (3) 400-HP, and (1) 500-HP, Repeater Table (Sold, Subject to Bulk B...

Lot - Repeater Table, (3) Finishing Roll Stands Consisting of: (1) 400-HP, (1) 1,200-HP and (1) 1,500-HP, Flying Divide Shear, Roll Stand Control ...

Cooling Bed Feed Line with Approximately 200' Walking Beam Cooling Bed (Sold, Subject to Bulk Bid, Lot #: 212A) (Mill Bldg North End) ...[more]

Beatty 350-Ton Capacity Cold Shear, Control Room for Associated Equipment (Blue Room) (Sold, Subject to Bulk Bid, Lot #: 212A) (Mill Bldg North En...

Automated Stacker System with Motorized Rolls, Chain Driven Transfers and Stacker Table, Control Pulpit for Associated Equipment (Grey Room), Fini...

Lot - Bulk 13 in. Hot Rolled Bar Mill - Lot #'s: 205 through and Including Lot #: 212 - Complete Mill Consists of, and Begin's with the Re-Heat Fu...

Lot - (24) Rolls with Racks in (1) Row, (Mill Bldg North End)

Lot - (16) Rolls with Racks in (2) Rows, (Mill Bldg North End)

Lot - (49) Rolls with Racks in (3) Rows, (Mill Bldg North End)

Lot - (48) Rolls with Racks in (2) Rows, (Mill Bldg North End)

Lot - (10) Rolls with (8) Stock Stands in (2) Rows, (Mill Bldg North End)

Lot - (54) Rolls with Racks in (1) Row, (Mill Bldg North End)

Lot - (66) Rolls with Racks in (1) Row, (Mill Bldg North End)

Lot - (36) Rolls with Racks in (1) Row, (Mill Bldg North End)

Lot - (35) Rolls with Racks in (1) Row, (Mill Bldg North End)

Lot - (36) Rolls with Racks in (1) Row, (Mill Bldg North End)

Lot - (6) Rolls with (1) Rack, (Mill Bldg North End)

Lot - (6) Rolls with (1) Rack, (Mill Bldg North End)