Used Lutetia Marination Tumbler with:  Capacity (approximately): Pounds: 2000 Liters: 900 Time cycles: 15 minutes to 1 hour per load Tumbler...

  Used Lutetia Marination Tumbler with:  Capacity (approximately): Pounds: 2000Liters: 900 Time cycles: 15 minutes to 1 hour per loadTumbler dim...

  Used Delta 1000 1 Up Print Registered Stainless Steel Flow Wrapper with:  Production speed: up to 60 ppm, depending on applicaiton and productSe...

Used Strapack RQ-8 Automatic Arch Case Strapper with:  Output: Up to 55 straps per minute depending upon applicationArch dimensions:  Width: 33....

Used Belcor Bel 150 Top and Bottom Manual Case Taper:  Production output: Up to 30 cases per minute Tape head: 2 inches Minimum case size: Lengt...

Used Shanklin T-7XL Heat Tunnel with:  Aperture dimensions: Width: 22 inchesHeight: 8.5 inches Infeed/Discharge height: 37 inchesConveyor dimens...

Used Hibar Depositor with:  Digital control panelStainless steel constructionElectrical requirements: 208 volts, 60 hertz, 3 phaseOverall dimensio...

Used Advent 300 Label Applicator with:  Speed: up to 30 containers per minuteContainer size range: Round containers ranging from 1 ounce to 1 gall...

Used Triangle L66C Vertical Form Fill and Seal with:  Speed: up to 50 bags per minuteSeal bar length: 14 inches8.5 inch cross sealElectrical requi...

Used Sachet Packet Sealer with:  Packet size: Length: 4 inchesWidth: 1.5 inch Seal bar length: 4 inchesChain length: 44 inches(2) lanesStainless...

Used Thomas Engineering Spray Coater: Tumbling drum Diameter: 59 inchesDepth: 47 inches6 baffles 6 head spray coaterInfeed height: 39 inches P...

Used HMC Premade Bag HFFS with:  Model: IMF 7 - 14Serial: H200140Max output: up to 100 pouches per minute depending on the application Minimum pou...

Used Bartelt Horizontal Form Fill Seal Poucher with:  Max output: up to 75 pouches per minute depending on the application  Approximate overall d...

Used HMC Horizontal Form Fill and Seal with:  Model: IM7-14Serial: H94070Max output: up to 100 pouches per minute depending on product and applica...

Used AMES Premade Bagger with:  Type: packager Approximate overall dimensions:  Length: 260 inches Width: 54 inches Height: 70 inches  GS2 PC Dr...

  Used Stainless Steel Tank with: Capacity: 200 gallonsInterior tank dimensions: Diameter: 36 inchesDepth: 47 inches Bottom side discharge diame...

Used Single Wall Tank with: Capacity: 125 gallonsTank dimensions: Diameter: 28 inchesHeight: 54 inches Side bottom discharge diameter: 2 inchesC...

Used HMC Horizontal Form Fill and Seal with:  Pouch size: minimum 2" x 2" maximum 6.75" x 9.6" 90/180 PPM Supply Voltage: 208 Volts, 3 Phase Contr...

Used Lewco 40SB Slider Bed Belt Conveyor with: Manufacturer: Lewco Serial: S10574 Variable speed drive Photo eye sensor Overall dimensions: Leng...

Used HMC Horizontal Form Fill and Seal with:  Manufacturer: HMC Products Inc.Year: UnknownModel: IM7-14Serial: H200141Max output: up to 100 pouche...

Used Glove Line with: Production speed: up to 400 pieces per minute, depending on applicationUnwind shaft film diameter: 20 inchesExit conveyor di...

Used Vectrax BS-N20V CNC Milling Machine with:  Table dimensions:  Length: 54 inchesWidth: 10 inches Bolt insert diameter: 1/2 inchElectrical re...

Used Yamada DCP-25BSE-FDA Air Powered Double Diaphragm AODD Pump with:  Inlet diameter: 1 inchOutlet diameter: 1 inchMaximum flow: 46.2 gallons pe...

Used Yamada DCP-25BSE-FDA Air Powered Double Diaphragm AODD Pump with:  Inlet diameter: 1 inchOutlet diameter: 1 inchMaximum flow: 46.2 gallons pe...

Used Circle Packaging V16 Vertical Form Fill and Seal with: Speed: up to 700 packages per minute, depending on package size and applicationLast ra...

Used Nordenmatic 700 Automatic Tube Filler and Sealer with: Fill range: Minimum: 1 milliliterMaximum: 600 milliliters Tube size range: Minimum...

Used TopFlex E-256 L Bar Sealer with:  Seal jaw dimensions: Length: 19 inchesWidth: 17 inches Conveyor dimensions:  Length: 31 inchesWidth: 15...

Used Yamada DCP-25BSE-FDA Air Powered Double Diaphragm AODD Pump with:  Inlet diameter: 1 inchOutlet diameter: 1 inchMaximum flow: 46.2 gallons pe...

Used Yamada DCP-25BSE-FDA Air Powered Double Diaphragm AODD Pump with:  Inlet diameter: 1 inchOutlet diameter: 1 inchMaximum flow: 46.2 gallons pe...

Used Sen-Pack Case Packer with:  Speed: up to 30 cases per minute, depending on applicationMinimum case size: Length: 150 millimetersWidth: 100 ...

Used Yamada DCP-25BSE-FDA Air Powered Double Diaphragm AODD Pump with:  Inlet diameter: 1 inchOutlet diameter: 1 inchMaximum flow: 46.2 gallons pe...

Used Yamada NDP-20BSE-FDA Air Powered Double Diaphragm Pump with:  Inlet diameter: 0.75 inchesOutlet diameter: 0.75 inchesMaximum flow: 31.7 gallo...

Used Yamada NDP-20BSE-FDA Air Powered Double Diaphragm Pump with:  Inlet diameter: 0.75 inchesOutlet diameter: 0.75 inchesMaximum flow: 31.7 gallo...

Used Rite Hite Litespeed Roll Up Door with: Lifting speed: up to 65 inches per secondOverall dimensions Width: 120 inchesHeight: 120 inches Elec...

Use Blue Rolling Cart with: Frame dimensions: Length: 94 inchesWidth: 42 inchesHeight: 38 inches Painted steel frameLockable casters ...[more]

Water Tank: Bottom discharge Inside diameter: 2 inches Top inlet Inside diameter: 4 inches Height: 48 inchesWidth: 15 inches Skidding, Rigging...

Used Capmatic Technic 2 DX Labeler Skidding, Rigging, and Loading Fee: $90 ...[more]

Used Tank Cart with: Overall dimensions: Width: 29 inchesLength: 24 inchesHeight: 47 inches Chain for holding upright tanksRoom for (2) normal s...

Used Stahl's Hotronix Thermal Transfer Press with: Seal dimensions: Length: 15 inches width: 11 inches LED display pressure adjustment knob Ma...

Used 3M-Matic Top and Bottom Manual Case Taper with: Output: up to 20 cases per minuteMinimum case dimensions: Length: 5.87 inchesWidth: 4.5 inc...

Used Step Ladder with: Overall dimensions:  Width: 21 inches Height: 204 inches Painted steel construction  Skidding, Rigging, and Loading Fe...

Used Adco Hand-Load Horizontal Cartoner with:  Conveyor dimensions:  Length: 107 inches Width: 5 inches Centers: 11 inches Maximum carton heig...

Used Vibratory Bowl Sifter: Stainless steel construction Skidding, Rigging, and Loading Fee $285.00 ...[more]

Used Table - Top Conveyor with: Conveyor: Length: 114 inches Width: 4.5 inches Height: 35 inches(adjustable) Stainless steel construction Delt...

Used Econoseal E2000 Cartoner 8415 with:  Production output rate: Up to 25 cartons per minute, depending on application Minimum carton dimensi...

Used Hibar Servo Dispensing System with: Stainless steel construction 3.2 horsepower  Digital control panel Emergency stop Electrical requirement...

Used Delta Batch Counter with: Hopper dimensions: Length: 15 inches Width: 15 inches Stainless steel construction Digital control panel Electr...

Used Delta Batch Counter with: Hopper dimensions: Length: 15 inchesWidth: 15 inches Stainless steel constructionDigital control panelElectrical ...

Used Dax-P600 Color Ribbon Hot Printer Machine with: Speed: 10-100 times per minutePrinting area: Single line maximum Length: 4 millimetersW...

Used Roll Through Labeler with: Label width: 1 inch Skidding, Rigging, and Loading Fee $120.00 ...[more]

Used Sachet Packet Sealer with: Packet size:  Length: 5 inchesWidth: 1.5 inches Seal bar length: 4 inchesChain length: 44 inches(2) lanesStainle...

New Blower Fan Wheel 66 in. Diameter Steel Welding with: Impeller: 66" diameterquarter inch welded steelShaft included: 2.75" diameterOn OEM palle...

New Blower Fan Wheel 66 in. Diameter Steel Welding with: Impeller: 66" diameterquarter inch welded steelShaft included: 2.75" diameterOn OEM palle...

Used Gast Dex Regenair Blower with 6 HP Baldor Motor with: Centrifugal blowerFrame: 215TCZRating: 40C AMB-contElectrics: Voltage: 208-230/460 vo...

Used Lugged Conveyor With Vertical Slicer Skidding, Rigging, and Loading Fee $120.00 ...[more]

Used Lugged Conveyor With Vertical Slicer Skidding, Rigging, and Loading Fee $120.00 ...[more]

Used hopper with: Dimensions:  Length: 60 inchesWidth: 44 inches Conveyor dimensions: Incline height: 70 inchesStraight top length: 30 inchesW...

Used Garvey 1550 Gap Transfer Conveyor with:  Gripper belt dimensions: Length: 36 inchesHeight: 2 inches Adjustable width gripper beltsVariable ...

Used Clamco 850 Heat Shrink Tunnel with:  Aperture dimensions: Width: 15.5 inchesHeight: 10 inches Tunnel length: 27.5 inchesConveyor dimensions...

Used Square D Transformer with: Power: 75 kVAInput voltage: 480VOutput voltage: 208Y/120VElectrical phase: 3Frequency: 60 Hz150° RiseType 2 enclos...