Okuma MC-4VAE CNC Vertical Machining Center, 20" x 40" table, 30" X travel, 16" Y travel, 17" Z travel, Cat 40 taper, 6000 rpm, 20 position tool c...

20” Tanshing 4th Axis Model MRNG-400, S/N B3A5K036JN, with 16” 4-Jaw Chuck, Tail stock Note: All Specifications Subject to Verification ...[more]

Tsudakoma 4th Axis, Model: RNCM-401R, S/N: 020085, Size of the plate: 15 3/4” with Tailstock. See photo. Note: All Specifications Subject to Veri...

10” 4th Axis Model VS-AC, S/N 02200002064, Ratio 130-1 Note: All Specifications Subject to Verification ...[more]

15” Troyke Rotary Table Note: All Specifications Subject to Verification ...[more]

52" x 156" LeBlond Engine  Lathe, S/N 45120 52” Swing 156" (13’) Centers, 30” 4-Jaw Chuck Spindle Speed: 255 RPM (max.) Note: Steady rest sold sep...

34" x 168" Axelson Engine Lathe, S/N 1718 Swing Over Bed; 34.5" Distance Between Centers: 168" Bed Length: 240" (20') Spindle Speeds; (Low Range):...

LeBlond Engine Lathe , 28" swing over bed, 20" swing over cross slide, 4 jaw chuck, tailstock, steady rest, taper attachment, SN 1093  Note: All...

Mori Seiki MH-2000G Gap Bed Engine Lathe, SN 4481 24" swing 80" centers 3" Hole Newall DRO 15” 3- Jaw Chuck Tool post Tail Stock Steady Rest Note...

Mori Seiki Lathe MR200, S/N 2675, 20” Swing over bed, 80” Centers, 1200 RPM, Note: All Specifications Subject to Verification

18" x 78" Monarch Engine Lathe, S/N 35238 18.5” Swing 78” Centers 12” 3-Jaw Bison Chuck Tailstock Tool Holder Steady Rest Taper Attachment Chip Pa...

13" x 30" PM Profitmaster 13 X 30 Toolroom Lathe, S/N 28053Spindle Speed: 1800 RPM (max.)6” 3-Jaw ChuckTool PostTail StockSteady RestMetric/Inch T...

27 1/2” 4- Jaw Chuck with 12 1/2” Thru Hole Note: All Specifications Subject to Verification ...[more]

25” 4-Jaw Chuck with 7” Thru Hole Note: All Specifications Subject to Verification ...[more]

18” 4-Jaw Chuck, 4” Thru Hole Note: All Specifications Subject to Verification ...[more]

15” 3-Jaw Chuck with 3” Thru Hole, Cam Lock Back Note: All Specifications Subject to Verification ...[more]

Lot of 3 Chucks: (1) 10” Chuck, (1) 10” Chuck with 3-Jaw Chuck with cam lock back, (1) 12” 4-Jaw Chuck with cam lock back Note: All Specification...

Lot of 2 Chucks, (1) 10” 3-Jaw Chuck with 2” Thru Hole, Soft Jaws, (1) 12” Chuck with 4” Thru Hole Cam Lock Back, Aluminum Adapter Note: All Spec...

3-Jaw Hydraulic Chuck with Set of Jaws. See photo. Note: All Specifications Subject to Verification ...[more]

Lot of 2 Face Plates (1) 20” (1) 10” Note: All Specifications Subject to Verification ...[more]

44” Large Steady Rest Note: All Specifications Subject to Verification ...[more]

27” Large Steady Rest Note: All Specifications Subject to Verification ...[more]

12 1/2” Steady Rest Note: All Specifications Subject to Verification ...[more]

12” Steady Rest Note: All Specifications Subject to Verification ...[more]

6 1/2” Aluminum Steady Rest  ...[more]

Lathe Tailstock. See photo. 7” to center Note: All Specifications Subject to Verification ...[more]

Lot of 5 Live Centers. See photo Note: All Specifications Subject to Verification ...[more]

Lagun Republic FTV-2 Vertical Milling Machine, S/N 42227 Table Size: 10" X 50" Long. Table Travel: 33" Manual / 30" Power Feed Table Cross Travel:...

Wells Index Model 847 Vertical Milling Machine, S/N 22360 Table Size: 10" x 48" Table Longitudinal Travel: 34" Table Cross Travel: 14" Knee vertic...

Bridgeport Model J Vertical Milling Machine, S/N 90656 Note: All Specifications Subject to Verification ...[more]

Induma Vertical Milling Machine, S/N 47580, 42” x 9” table size Location: Lockwood Note: All Specifications Subject to Verification ...[more]

{ Choice of lots: 91, 92, 93 } 6” Shars Vise Model 690V, S/N 1310159 Note: All Specifications Subject to Verification ...[more]

{ Choice of lots: 91, 92, 93 } 6” Shars Vise Model 690V Note: All Specifications Subject to Verification ...[more]

{ Choice of lots: 91, 92, 93 } 6” Shars Vise Model 690V Note: All Specifications Subject to Verification ...[more]

{ Group of lots: 94, 95 } 8” Endless Vise Note: All Specifications Subject to Verification ...[more]

{ Group of lots: 94, 95 } 8” Endless Vise Note: All Specifications Subject to Verification ...[more]

6” G&L Floor Type Horizontal Boring Mill Floor Plate Shown in Photos is Sold Separately Spindle Diameter: 6" Column Cross Travel: 216" Headstock V...

Floor Plate: 10' x 10' x 12" Thick, with Leveling Pads Location: Lockwood Note: All Specifications Subject to Verification ...[more]

(4) 96" x 36" x 9" Thick Floor Plates, machined and keyed to be bolted together.  Could make an area 3' x 32', 8' x 12' or 6' x 16'.  Location: L...

Shibaura BT-10B (R1) Table Type Horizontal Boring Mill, S/N 161073 44” X 49” Table 50 Taper Power Draw Bar Acu-Rite DRO Pendant Control Date Mfg: ...

Plauert-Wetzel VWF Table Type Horizontal Boring Mill, S/N NA, 49” x 40” Table, 20” Facing Head, Pendant Control, 1,400 RPM Note: All Specification...

Large Angle Plate, 84" wide x 60" deep x 62" tall, 2" solid metal frame with Lifting Eye, 7450 pounds Location: Lockwood Note: All Specifications...

Small Angle Plate, 31" w x 20" deep x 33" tall, 1-1/2" thick base Location: Lockwood Note: All Specifications Subject to Verification ...[more]

Lot of 2 Angle plate with Attachment. See photo. Note: All Specifications Subject to Verification ...[more]

78" Schiess Vertical Boring Mill, S/N NA78” 4-Jaw Table, 90” Swing, 60” Under the Rail,Table Speeds: 6 - 75 RPMRH 5-Sided TurretLH RamSide Head No...

Cleveland Planer Mill, S/N 5426 34" x 160" table 44” Under Rail Milling Spindle with 50 Taper Note: All Specifications Subject to Verification ...

Davis No. 5 Key Seater, minimum key width 1/16", max key width, 1.5", max cut length 21", cabinet with tooling included Note: All Specifications ...

SMTW EcoTech Blanchard Model M7475U Rotary Surface Grinder, S/N 3578 Magnetic Chuck Diameter: 30" Maximum Work Size: 30” Vertical Travel: 17.7" Wh...

Colonial Broach Model HAS-6-54–SP Horizontal Keyway Machine, S/N D61-02-0643 Tonnage 6 T Stroke 54" Weight 17,000 lbs. Includes Tooling Note: All...

Hey No. 3 Automatic Facing and Centering Machine, S/N 12-05840 Maximum Diameter of Work Piece: 6.25” Minimum Diameter of Work Piece: 0.25” Maximum...

Tool Box Cart With Contents. See photo. Note: All Specifications Subject to Verification ...[more]

Lot of Cat 50 with HUOT TOOLSCOOT Cart. See photo. Note: All Specifications Subject to Verification ...[more]

HUOT TOOLSCOOT Tool Cart. See photo. Note: All Specifications Subject to Verification ...[more]

Pallet of Cat 50 and Box of Collets. See photo. Note: All Specifications Subject to Verification ...[more]

Pallet of Cat 40. See photo. Note: All Specifications Subject to Verification ...[more]

{ Choice of lots: 115, 116, 117 } Lot of 10 Cat 40. See photo. Note: All Specifications Subject to Verification ...[more]

{ Choice of lots: 115, 116, 117 } Lot of 10 Cat 40. See photo. Note: All Specifications Subject to Verification ...[more]

{ Choice of lots: 115, 116, 117 } Lot of 10 Cat 40. See photo. Note: All Specifications Subject to Verification ...[more]

{ Choice of lots: 118, 119, 120, 121 } Lot of 10 Cat 40. See photo. Note: All Specifications Subject to Verification ...[more]

{ Choice of lots: 118, 119, 120, 121 } Lot of 10 Cat 40. See photo. Note: All Specifications Subject to Verification ...[more]