0
FULL CATALOG COMING SOON. REGISTER TODAY!
1/7
Passed
Edmonton, Alberta
5,00%
13,00%
Descripción
FEATURING: STEEL INVENTORY: APPROXIMATELY 800,000 LBS OF HR & CR PLATE, I-BEAM, CHANNEL, ANGLE, TUBING, PIPE, ROUND AND SQUARE ROD * SOME STAINLESS, BAR GRATE AND MORE * STEEL WORK PLATFORMS WITH 1” PLATE TOPS UP TO 40 FEET LONG CRANES:GROVE RT980 ROUGH TERRAIN CRANE, 80 TON CAPACITY, 36’ MIN HEIGHT AT MAX RAISE ANGLE, 148’ MAX HEIGHT AT MAX RAISE ANGLE WITHOUT JIB, 4 SECTION BOOM, 6 SHEAVE BLOCK, SWING AWAY JIB (NOT INSTALLED), DETROIT 6-71T DIESEL, 5469 HOURS, CURRENT INSPECTION, S/N 40000 * GROVE RT500C ROUGH TERRAIN CRANE, 25 TON CAPACITY, 28’ MIN HEIGHT AT MAX RAISE ANGLE, 70’ MAX HEIGHT AT MAX RAISE ANGLE, 3 SECTION BOOM, 4 SHEAVE BLOCK, SWING AWAY JIB (NOT INSTALLED), CUMMINS ENGINE, 5306 HOURS, CURRENT INSPECTION, S/N 84991 * GROVE RT58E ROUGH TERRAIN CRANE, 22 TON CAPACITY, 25’ MIN HEIGHT AT MAX RAISE ANGLE, 60’ MAX HEIGHT AT MAX RAISE ANGLE (WITHOUT JIB, 3 SECTION MAST, SWING UNDER JIB (NOT INSTALLED), CUMMINS DIESEL, 9100 HOURS, CURRENT CERTIFICATION, S/N 73872 * FORKLIFTS AND MANLIFTS: CAT P33000 DIESEL FORKLIFT, 29800# LIFT CAP., HYDRAULIC FORKS, SIDE SHIFT, 197” LIFT HEIGHT, 12:00 X 20 DUAL DRIVERS, 12:00 X 20 STEERING 8394 HOURS ON METER, S/N T39A-10317 * HYSTER H280HD DIESEL FORLIFT, 28,000# LIFT CAP., HYDRAULIC FORKS, SIDE SHIFT, 148” LIFT HEIGHT, 10:00 X 20 DUAL DRIVERS, 10:00 X 20 STEERING, 13,865 HOURS ON METER * CAT DP50K DIESEL FORKLIFT, 9,000# LIFT CAP., HYDRAULIC FORKS, SIDESHIFT, 189” LIFT HEIGHT, 8:25 X 15 DUAL DRIVERS, 7:00 X 12 STEERING, 5667 HOURS ON METER, S/N AT28B60434 * JLG MODEL 450 AJ MANLIFT, 5372 HOURS, S/N 0300059961 * JLG SERIES II MANLIFT, 5662 HOURS (ENGINE NEEDS TIMING BELT), S/N 030009189 PLASMA CUTTING SYSTEM: MESSER TITAN CNC PLASMA CUTTING SYSTEM MODEL TITAN 10/4P-02-4121, 10’ X 44’ TABLE WITH ALL NEW SLATS, 2002 UNIT COMPLETELY RETROFITTED IN 2014 TO HYPERTHERM HPRXD POWER SOURCE S/N HPR400-002458 WITH HYPERTHERM COOLING SYSTEM MODEL 078531 AND MESSER 8 CARTRIDGE VACUUM HOUSE AND CONTROLS, COMPUTERS WITH SOFTWARE LOADED (LICENSING IS THE PURCHASERS RESPONSIBILITY) * HYPERTHERM HT4400 PLASMA CUTTING SYSTEM WITH HYPERTHERM COOLING SYSTEM * HYPERTHERM 200 CART MOUNTED PLASMA CUTTING SYSTEM * HYPERTHERN 105 POWERMAX AND 75 PLASMA CUTTING SYSTEM 8 FABRICATING: HYD-MECH M-20A N.C. BANDSAW * 2- SAFEHOLD 10,000 LB LIFTING MAGNETS * POWERED CONVEYORS IN AND OUT FEED * PEDDINGHAUS 110/140 IRON WORKER, 6” X ½” ANGLE CAP., 12” X 7/8” BAR CAP., S/N 42381470100032 * OLIVER 510 DRILL SHARPENER * ARCHDALE 6’ RADIAL ARM DRILL, 64” UNDER ARM, 40” LIFT, 16” POST * ARCHDALE 5’ RADIAL ARM DRILL, 56” UNDER ARM, 30” LIFT, 14” POST * FORCE JZB-25 AUTO FEED DRILL PRESS * FORCE LG-25 DRILL PRESS * DRILL BITS IN PRISTENE CONDITION TO 3” * LARGE QUANTITY OF DIES FOR IRON WORKER WITH HEAD FOR LARGE HOLES * SUB ARC: LINCOLN TRACER SUB ARC WITH LT-7 TRACTOR AND LINCOLN DC- WELD POWER SOURCE WELDERS: 2- MILLER BIG BLUE 402P 400 AMP DIESEL WELDERS, MOUNTED ON SKID FOR CRANE OR FORKLIFT HANDLING, 1- 7483 HRS, 1- 7941 HRS * 14- LINCOLN FLEXTEC 450 DIGITAL INVERTER WELDERS WITH LF-72 WIRE FEEDERS * 8- LINCOLN IDEALARC RSR-400 RECTIFIER WELDERS * 2- LINCOLN DC600 WELD POWER SOURCES * 2- LINCOLN IDEAL ARC R3R-500 RECTIFIER WELDERS * 6- LINCOLN CV 300 MIG WELD POWER SOURCE WITH LN-7 WIRE FEEDERS * 2- MILLER DIMENSION 452 WELDERS * PROWELD ARC-1850 STUD WELDER * 2- PROWELD ARC-1200 STUD WELDER * STRUCTURES: 40’ SKIDDED OFFICE / LUNCH ROOM SHACK AIR COMPRESSORS: 2017 DV SYSTEMS G30 ROTARY SCREW AIR COMPRESSOR WITH DV PRO DRY AIR DRYER COOLER * SULLAIR 750 DIESEL AIR COMPRESSOR, CAT DIESEL, 750 C.F.M., TRAILER MOUNTED, 2731 HOURS, S/N 114824 * SANDBLASTING & PAINT: 2-CLEMCO CLASSIC 150 SANDBLAST POTS C/W HOSES AND GUNS, 1-2004, 1-2010 * SAND SILO APPROX. 25 CUBIC METRES * GRACO AIRLESS SPRAY SYSTEM WELDING EQUIPMENT: 2 SETS 2012 IRIZAR SAR-80 PIPE ROLLS, 850 – 5000 mm, LOADING CAPACITY 40 TON, ROTATION CAPACITY 80 TON, 500mm WHEEL, ROTATION 100 – 1OOO mm/MIN, S/N 356103 & 356104 * APPROX. 36 SETS OF H.D. STEEL PIPE STANDS TO 8’ * GULLCO 350 ROD OVEN * 4- VICTOR RADIAGRAPH, 200 FEET OF TRACK * MISCELLANEOUS: 50 TON MACHINE SKATES * 4530 LITRE DOUBLE WALLED DIESEL TANK, SKID MOUNTED, WITH METER * MAGNUM VLT4060 LIGHT TOWER, 1073 HOURS, S/N 046956 * PLATE CLAMPS TO 3” * MAGNETIC DRILLS AND MILLS * LIFTING MAGNETS * 4- 9-10,000 LB. COUNTER WEIGHTS & 1- 4,100 LB. * HOTSY ELETRIC STEAMER/WASHER, DIESEL FIRED HEATER * APPROX. 50 TON HYDRAULIC PRESS * 15 OXY/ACCET BOTTLE RACKS WITH TORCHES AND GAUGES * SKIDDED STEEL SHACK FOR BOTTLE STORAGE * 3- FLAGRO FVP-400 390,000 BTU PROPANE CONSTRUCTION HEATERS, STEEL PLATE AND STRUCTURAL RACKS * 1 TON ELECTRIC CHAIN HOISTS * SPREADER BARS * COM-A-LONGS * NUMEROUS HAND AND POWER TOOLS * THIS IS A BIDSPOTTER ON-LINE AND SIMULTANEOUS LIVE AUCTION
Auction Details
Rigging/Removals
T&Cs & Important Info
Ask seller a question
FEATURING: STEEL INVENTORY: APPROXIMATELY 800,000 LBS OF HR & CR PLATE, I-BEAM, CHANNEL, ANGLE, TUBING, PIPE, ROUND AND SQUARE ROD * SOME STAINLESS, BAR GRATE AND MORE * STEEL WORK PLATFORMS WITH 1” PLATE TOPS UP TO 40 FEET LONG CRANES:GROVE RT980 ROUGH TERRAIN CRANE, 80 TON CAPACITY, 36’ MIN HEIGHT AT MAX RAISE ANGLE, 148’ MAX HEIGHT AT MAX RAISE ANGLE WITHOUT JIB, 4 SECTION BOOM, 6 SHEAVE BLOCK, SWING AWAY JIB (NOT INSTALLED), DETROIT 6-71T DIESEL, 5469 HOURS, CURRENT INSPECTION, S/N 40000 * GROVE RT500C ROUGH TERRAIN CRANE, 25 TON CAPACITY, 28’ MIN HEIGHT AT MAX RAISE ANGLE, 70’ MAX HEIGHT AT MAX RAISE ANGLE, 3 SECTION BOOM, 4 SHEAVE BLOCK, SWING AWAY JIB (NOT INSTALLED), CUMMINS ENGINE, 5306 HOURS, CURRENT INSPECTION, S/N 84991 * GROVE RT58E ROUGH TERRAIN CRANE, 22 TON CAPACITY, 25’ MIN HEIGHT AT MAX RAISE ANGLE, 60’ MAX HEIGHT AT MAX RAISE ANGLE (WITHOUT JIB, 3 SECTION MAST, SWING UNDER JIB (NOT INSTALLED), CUMMINS DIESEL, 9100 HOURS, CURRENT CERTIFICATION, S/N 73872 * FORKLIFTS AND MANLIFTS: CAT P33000 DIESEL FORKLIFT, 29800# LIFT CAP., HYDRAULIC FORKS, SIDE SHIFT, 197” LIFT HEIGHT, 12:00 X 20 DUAL DRIVERS, 12:00 X 20 STEERING 8394 HOURS ON METER, S/N T39A-10317 * HYSTER H280HD DIESEL FORLIFT, 28,000# LIFT CAP., HYDRAULIC FORKS, SIDE SHIFT, 148” LIFT HEIGHT, 10:00 X 20 DUAL DRIVERS, 10:00 X 20 STEERING, 13,865 HOURS ON METER * CAT DP50K DIESEL FORKLIFT, 9,000# LIFT CAP., HYDRAULIC FORKS, SIDESHIFT, 189” LIFT HEIGHT, 8:25 X 15 DUAL DRIVERS, 7:00 X 12 STEERING, 5667 HOURS ON METER, S/N AT28B60434 * JLG MODEL 450 AJ MANLIFT, 5372 HOURS, S/N 0300059961 * JLG SERIES II MANLIFT, 5662 HOURS (ENGINE NEEDS TIMING BELT), S/N 030009189 PLASMA CUTTING SYSTEM: MESSER TITAN CNC PLASMA CUTTING SYSTEM MODEL TITAN 10/4P-02-4121, 10’ X 44’ TABLE WITH ALL NEW SLATS, 2002 UNIT COMPLETELY RETROFITTED IN 2014 TO HYPERTHERM HPRXD POWER SOURCE S/N HPR400-002458 WITH HYPERTHERM COOLING SYSTEM MODEL 078531 AND MESSER 8 CARTRIDGE VACUUM HOUSE AND CONTROLS, COMPUTERS WITH SOFTWARE LOADED (LICENSING IS THE PURCHASERS RESPONSIBILITY) * HYPERTHERM HT4400 PLASMA CUTTING SYSTEM WITH HYPERTHERM COOLING SYSTEM * HYPERTHERM 200 CART MOUNTED PLASMA CUTTING SYSTEM * HYPERTHERN 105 POWERMAX AND 75 PLASMA CUTTING SYSTEM 8 FABRICATING: HYD-MECH M-20A N.C. BANDSAW * 2- SAFEHOLD 10,000 LB LIFTING MAGNETS * POWERED CONVEYORS IN AND OUT FEED * PEDDINGHAUS 110/140 IRON WORKER, 6” X ½” ANGLE CAP., 12” X 7/8” BAR CAP., S/N 42381470100032 * OLIVER 510 DRILL SHARPENER * ARCHDALE 6’ RADIAL ARM DRILL, 64” UNDER ARM, 40” LIFT, 16” POST * ARCHDALE 5’ RADIAL ARM DRILL, 56” UNDER ARM, 30” LIFT, 14” POST * FORCE JZB-25 AUTO FEED DRILL PRESS * FORCE LG-25 DRILL PRESS * DRILL BITS IN PRISTENE CONDITION TO 3” * LARGE QUANTITY OF DIES FOR IRON WORKER WITH HEAD FOR LARGE HOLES * SUB ARC: LINCOLN TRACER SUB ARC WITH LT-7 TRACTOR AND LINCOLN DC- WELD POWER SOURCE WELDERS: 2- MILLER BIG BLUE 402P 400 AMP DIESEL WELDERS, MOUNTED ON SKID FOR CRANE OR FORKLIFT HANDLING, 1- 7483 HRS, 1- 7941 HRS * 14- LINCOLN FLEXTEC 450 DIGITAL INVERTER WELDERS WITH LF-72 WIRE FEEDERS * 8- LINCOLN IDEALARC RSR-400 RECTIFIER WELDERS * 2- LINCOLN DC600 WELD POWER SOURCES * 2- LINCOLN IDEAL ARC R3R-500 RECTIFIER WELDERS * 6- LINCOLN CV 300 MIG WELD POWER SOURCE WITH LN-7 WIRE FEEDERS * 2- MILLER DIMENSION 452 WELDERS * PROWELD ARC-1850 STUD WELDER * 2- PROWELD ARC-1200 STUD WELDER * STRUCTURES: 40’ SKIDDED OFFICE / LUNCH ROOM SHACK AIR COMPRESSORS: 2017 DV SYSTEMS G30 ROTARY SCREW AIR COMPRESSOR WITH DV PRO DRY AIR DRYER COOLER * SULLAIR 750 DIESEL AIR COMPRESSOR, CAT DIESEL, 750 C.F.M., TRAILER MOUNTED, 2731 HOURS, S/N 114824 * SANDBLASTING & PAINT: 2-CLEMCO CLASSIC 150 SANDBLAST POTS C/W HOSES AND GUNS, 1-2004, 1-2010 * SAND SILO APPROX. 25 CUBIC METRES * GRACO AIRLESS SPRAY SYSTEM WELDING EQUIPMENT: 2 SETS 2012 IRIZAR SAR-80 PIPE ROLLS, 850 – 5000 mm, LOADING CAPACITY 40 TON, ROTATION CAPACITY 80 TON, 500mm WHEEL, ROTATION 100 – 1OOO mm/MIN, S/N 356103 & 356104 * APPROX. 36 SETS OF H.D. STEEL PIPE STANDS TO 8’ * GULLCO 350 ROD OVEN * 4- VICTOR RADIAGRAPH, 200 FEET OF TRACK * MISCELLANEOUS: 50 TON MACHINE SKATES * 4530 LITRE DOUBLE WALLED DIESEL TANK, SKID MOUNTED, WITH METER * MAGNUM VLT4060 LIGHT TOWER, 1073 HOURS, S/N 046956 * PLATE CLAMPS TO 3” * MAGNETIC DRILLS AND MILLS * LIFTING MAGNETS * 4- 9-10,000 LB. COUNTER WEIGHTS & 1- 4,100 LB. * HOTSY ELETRIC STEAMER/WASHER, DIESEL FIRED HEATER * APPROX. 50 TON HYDRAULIC PRESS * 15 OXY/ACCET BOTTLE RACKS WITH TORCHES AND GAUGES * SKIDDED STEEL SHACK FOR BOTTLE STORAGE * 3- FLAGRO FVP-400 390,000 BTU PROPANE CONSTRUCTION HEATERS, STEEL PLATE AND STRUCTURAL RACKS * 1 TON ELECTRIC CHAIN HOISTS * SPREADER BARS * COM-A-LONGS * NUMEROUS HAND AND POWER TOOLS * THIS IS A BIDSPOTTER ON-LINE AND SIMULTANEOUS LIVE AUCTION
Unreserved Steel Fabricating Auction
Sale Date(s)
Dirección de la sala
233 - 116 Avenue
Edmonton
Alberta
T6S 1G3
Canada
For FOOTHILLS EQUIPMENT LIQUIDATION CO LTD delivery information please telephone 780-922-6090.
Información importante
RIGGER/SHIPPER:
B&R ECKEL'S, DICK MATHEWS, FREIGHT MANAGER CELL #780-205-0199
Rusty's Equpment & General Hauling Ltd., Doug Manuel, Office 780-456-5611
Joe @ Hercules Rigging and Moving Ltd. 780-887-1952
Total Quality Logistics - Thomas Trombetta, Desk-1-513-831-2600 ext 44816 or
Cell-1-845-597-7330, email TTrombetta@tq
BidSpotter Customer Service Support Department
Have a question pertaining to the bidding process?
Visit our Frequently Asked Questions!
You can also start a live chat with a Bidspotter Support Representative by selecting Live Chat at the top of Bidspotter.com. More information on our chat system can be found by clicking here.
Customer Support Hours:
- Monday – Thursday, 8:00 AM EST – 10:00 PM EST
- Friday, 8:00 AM EST – 6:30 PM EST
Email: support@bidspotter.com
Office: (253) 858-6777 Toll Free: (866) 597-2437
Condiciones
Terms and Conditions
TERMS & CONDITIONS FOR FOOTHILLS EQUIPMENT LIQUIDATION CO. LTD.
UNRESERVED AUCTION –INDUSTRIAL & FABRICATION SALE
TERMS & CONDITIONS FOR ON-LINE BIDDER:
CUTOFF FOR ONLINE BIDDER REGISTRATION IS MONDAY, SEPTEMBER 10, 2018, 3 P.M.
CDN. DOLLARS (CAD) SETTLEMENT MUST BE MADE BY 4 P.M. ON THE DAY
FOLLOWING THE AUCTION.
Subject to additions and deletions prior to the sale and at the time of the auction. All bidders participating in the auction shall be bound by the following terms & conditions.
1. Auction to be conducted in English & in Canadian Dollars (CAD).
1(a) Payment or settlement must be made immediately at the conclusion of the auction.
2. Foothills required guaranteed payment which must be provided by the purchaser by means of the following: 2a, 2b or certified funds given as a deposit in trust.
2(a) Bidders must provide a valid credit card number to register. A $1,OOO pre-authorized hold will be placed on this credit card prior to the sale and anytime up to sale time. If no purchases are made will be automatically removed 3 - 5 business days following the auction day.
2(b) A pre-authorized hold may be placed on the credit card provided for 25% of the amount of any purchases immediately on the drop of the hammer. This deposit is non-refundable unless certified funds are given. Payment in full is expected by 4 p.m. the day following the sale. 2(c) Foothills may and will charge the credit card left at the point of registration for any and all auction purchases if another method of payment is not arranged within 24 hours prior to the auction ending
3. Foothills Equipment Liquidation Co. Ltd. "Foothills" reserves the right to accept or reject a Bidders registration, and those with incomplete information, invalid credit card, or insufficient funds to complete a hold, as described in paragraph 2. To avoid delays in the registration approval process, please check accuracy of all information provided.
4 Foothills accepts the following methods of payment: Visa, MasterCard to $3,000 with no credit card fees, 3% over $3,000 and Wire Transfer in Canadian Dollars (CAD).
Auctioneers Terms and Conditions -
5. Each successful online bidder will receive confirmation at the beginning of the next business day either by phone or by email. All purchases must be settled in full by 4 p.m. on the day following the sale. Foothills will make one attempt at phoning all winning bidders with the final invoice total and to confirm the method of payment. If we are unable to contact you, purchases will be charged to the credit card as provided. Otherwise, payment arrangements can be made by calling 780-922-6090 with your Bidder # as reference.
6. All articles purchased shall be removed by the Purchaser. Purchaser is responsible for all removal, dismantling, crating, shipping and related costs, as well as the arrangement of the shipping company. No exceptions will be made whatsoever. Articles left behind immediately after the auction and thereafter will be at the winning bidders own risk. Foothills will not be held responsible for any items damaged, stolen, missing, or left behind. Please make all necessary arrangements to have your items removed as soon as possible. Small items must be removed immediately.
7. Removal deadline is 3:30 p.m. September 21, 2018.
8. A 13% buyer's premium will apply on all purchases made by internet bidding.
9. A 5% GST applies to all purchases in Canada, any exempt buyers can apply to CRA for a refund
10. Terms and conditions are subject to amendments and modifications announced by the auctioneer at the time of the auction. Sale is subject to additions & deletions, and may include items from other consignors and/or situations.
11. All items are sold "AS IS, WHERE IS" with no warranties expressed or implied.
12. The Auction Company reserves the right to accept or reject bids, and to resolve any disputes or discrepancies at its discretion. The Auctioneers or Auction Companies decision shall be final.
13. All descriptions & photos provided by the catalog listing is for informational purposes only and in no way a representation or guaranteed implied or given.
Wire Transfer Details:
Currency: CAD
Beneficiary: Foothills Equipment Liquidation Co. Ltd.
Contact: Linda 780-922-6090 or 780-721-5245
Reference:: Sept 1 Precision Stttel & Manufacturing Ltd. For payment on Bidder # and Name
