116
Lote
116
1 - Used JCMCO JC-RT-16H Tablet Press
Model: JC-RT-16H
Manufacture Date: Feburary 1999
Serial Number: 880210
Type of tooling: EU “D”IPT”D”
Tablet Diameter Max: 25.4mm (1”)
Production Capacity (tablets per hour): 17,000- 69,000
Revolutions of turrent/min: 16-72 RPM
Depth of fill adjustable to : 19mm (0.75)
Maximum Operating Pressure: 10,000kgs (22,000lbs)
Maximum Pre- pressure: 3,000kgs (6,600lbs)
Diameter of die: 38.1
Height of die: 23.81mm (0.9375”)
Nominal diameter of punch body: 25.4mm (1’’)
Turret P.C.D.: 253mm
Power Consumption: 3 HP (2.2kw)
Machine Dimensions: 850 x 790 x 1,710mm (not including hopper)
Net weight: 1,200 kgs (2646lbs)
A central lubrication system supplies oil continuously to lower punches, while grease applied manually lubricates upper punches. The ejection cam is manufactured from special tool steel for extended life, while a double sided lifting cam is provided.
The scrapers seals for the upper punches protect tablets from oil drip, while the dust seals on the lowers prevent the punches from binding and reduce wear on the cam. This combined with an efficient dust extraction system allows prolonged run with little downtime for cleaning.
Direct rotation of the turret by the main shaft reduces the moise level; it provide maximum protection to the gears and the drive system.
High pre-compression of 3000 kgs insures trouble-free processing of difficult granules. It helps in the direct compaction of materials, reducing lamination and capping. Pressure rollers are made of special tool steel that ensures uniform pressure application. The double bearings are fitted, which minimize wearing of the rollers.
The feeder support platform is preset at the factory to the correct height and should not require adjustment. Quick release clamping screws allows removal of the feeder for cleaning and tool changeover without the need to disturb the feeder platform setting.
The two chambers feeding system has been improved further. It is driven from top by a variable speed motor. The unit can be assembled or disassembled easily.
The detachable panels can be removed easily, which reveal the entire bottom punch cams. This allows easy removal of the bottom punches. Upper punch monitoring device is available that would switch off the machine in the event of punch tightness.
Skidding and Load out charges: There will be loading and skidding charges added to your purchase at market rates for your convenience.
Location: Vancouver, Washington
*These items will be available to ship at the end of September. Shipping from Vancouver Washington.*
Skidding:$625
Load Out:$520
PICKUP/REMOVAL: All Items won at auction need to be removed from the facility by October 7th 2022. If Items and/or equipment are not picked up by that date, they will be considered abandoned.
RIGGING:
There is no self-rigging. All Rigging and Load out will be completed by a contracted and approved Rigger.
AUCTION DATE: lots start closing on Tuesday, September 13th, 2022 at 10:00 am PT
LOCATION: **Note** Assets Located in Multiple Locations **
INSPECTION: Please contact us to schedule. 818-495-3038
PICKUP/REMOVAL: All Items won at auction need to be removed from the facility by October 7th, 2022. If Items and/or equipment are not picked up by that date, they will be considered abandoned.
RIGGING:
There is no self-rigging. All Rigging and Load out will be completed by a contracted and approved Rigger.
18% Buyers Premium applies on all online purchases.
All machines that produce and or manufacture drugs of any kind will be reported to DEA after completion of sale
BidSpotter Customer Service Support Department
Have a question pertaining to the bidding process?
Visit our Frequently Asked Questions!
You can also start a live chat with a Bidspotter Support Representative by selecting Live Chat at the top of Bidspotter.com. More information on our chat system can be found by clicking here.
Customer Support Hours:
Email: support@bidspotter.com
Office: (253) 858-6777 Toll Free: (866) 597-2437
Terms of Sale Agreement:
SELLER RESERVES THE RIGHT TO ACCEPT OR REJECT ANY AND ALL BIDS
Inspection date (day only) is:
By Appointment Only. Call 818 495 3038 to Schedule.
Inspection locations:
Various Locations, call for specific item.
Inspection by appointment only.
Call or Email Logan Hillseth logan@chrishillsethenterprises.com or Patrick Hillseth at (818)495-3038 patrick@chrishillsethenterprises.com
Your question has been sent to the auctioneer.
There was an error sending your enquiry, why not try again later
1 - Used JCMCO JC-RT-16H Tablet Press
Model: JC-RT-16H
Manufacture Date: Feburary 1999
Serial Number: 880210
Type of tooling: EU “D”IPT”D”
Tablet Diameter Max: 25.4mm (1”)
Production Capacity (tablets per hour): 17,000- 69,000
Revolutions of turrent/min: 16-72 RPM
Depth of fill adjustable to : 19mm (0.75)
Maximum Operating Pressure: 10,000kgs (22,000lbs)
Maximum Pre- pressure: 3,000kgs (6,600lbs)
Diameter of die: 38.1
Height of die: 23.81mm (0.9375”)
Nominal diameter of punch body: 25.4mm (1’’)
Turret P.C.D.: 253mm
Power Consumption: 3 HP (2.2kw)
Machine Dimensions: 850 x 790 x 1,710mm (not including hopper)
Net weight: 1,200 kgs (2646lbs)
A central lubrication system supplies oil continuously to lower punches, while grease applied manually lubricates upper punches. The ejection cam is manufactured from special tool steel for extended life, while a double sided lifting cam is provided.
The scrapers seals for the upper punches protect tablets from oil drip, while the dust seals on the lowers prevent the punches from binding and reduce wear on the cam. This combined with an efficient dust extraction system allows prolonged run with little downtime for cleaning.
Direct rotation of the turret by the main shaft reduces the moise level; it provide maximum protection to the gears and the drive system.
High pre-compression of 3000 kgs insures trouble-free processing of difficult granules. It helps in the direct compaction of materials, reducing lamination and capping. Pressure rollers are made of special tool steel that ensures uniform pressure application. The double bearings are fitted, which minimize wearing of the rollers.
The feeder support platform is preset at the factory to the correct height and should not require adjustment. Quick release clamping screws allows removal of the feeder for cleaning and tool changeover without the need to disturb the feeder platform setting.
The two chambers feeding system has been improved further. It is driven from top by a variable speed motor. The unit can be assembled or disassembled easily.
The detachable panels can be removed easily, which reveal the entire bottom punch cams. This allows easy removal of the bottom punches. Upper punch monitoring device is available that would switch off the machine in the event of punch tightness.
Skidding and Load out charges: There will be loading and skidding charges added to your purchase at market rates for your convenience.
Location: Vancouver, Washington
*These items will be available to ship at the end of September. Shipping from Vancouver Washington.*
Skidding:$625
Load Out:$520
PICKUP/REMOVAL: All Items won at auction need to be removed from the facility by October 7th 2022. If Items and/or equipment are not picked up by that date, they will be considered abandoned.
RIGGING:
There is no self-rigging. All Rigging and Load out will be completed by a contracted and approved Rigger.
AUCTION DATE: lots start closing on Tuesday, September 13th, 2022 at 10:00 am PT
LOCATION: **Note** Assets Located in Multiple Locations **
INSPECTION: Please contact us to schedule. 818-495-3038
PICKUP/REMOVAL: All Items won at auction need to be removed from the facility by October 7th, 2022. If Items and/or equipment are not picked up by that date, they will be considered abandoned.
RIGGING:
There is no self-rigging. All Rigging and Load out will be completed by a contracted and approved Rigger.
18% Buyers Premium applies on all online purchases.
All machines that produce and or manufacture drugs of any kind will be reported to DEA after completion of sale
BidSpotter Customer Service Support Department
Have a question pertaining to the bidding process?
Visit our Frequently Asked Questions!
You can also start a live chat with a Bidspotter Support Representative by selecting Live Chat at the top of Bidspotter.com. More information on our chat system can be found by clicking here.
Customer Support Hours:
Email: support@bidspotter.com
Office: (253) 858-6777 Toll Free: (866) 597-2437
Terms of Sale Agreement:
SELLER RESERVES THE RIGHT TO ACCEPT OR REJECT ANY AND ALL BIDS
Inspection date (day only) is:
By Appointment Only. Call 818 495 3038 to Schedule.
Inspection locations:
Various Locations, call for specific item.
Inspection by appointment only.
Call or Email Logan Hillseth logan@chrishillsethenterprises.com or Patrick Hillseth at (818)495-3038 patrick@chrishillsethenterprises.com