210
Cookies help us deliver our services. By using our services, you agree to our use of cookies.
Accept Cookies Learn MoreLote
210
1 - Used EV 037 Eccentric Lap Slicer / Crimper Machine with Pick in Place
** Please take into consideration that these items will not be pulled out of production and shipped if purchased until the end of March 2022**
Model: HD-ALRS-900M
Serial Number:M2582 - M2583
Volts: 115
Hz: 50/60
Phase: 0
Amps: 9
Pressure: 80PSI
Quality: Clean Nonlubricated. Dry to dew point of 40 degrees.
General Info:
The operater prepares the leading edge of the web from a new roll while the other supply roll is unwinding.
The splice may be initiated by a manual push button or by machine control logic, which also controls the entire sequence.
When the splice is initiated, the web clamps close, stopping and holding the webs.
the nip rolls then come together, joining the taped end of the new web and the running web.
Next, the kniffe fires, severing the running web.
The clamps then release, allowing the web to moce through the nip rolls. The lower rolls serve to bond the forwardedge of tyhe splice a second time. a set of belts ensure control of the leading edge of the new web as it passes between the set of nip rolls.
Finally, the nip rolls return to the open position.
BULK LOT: Sum of lots 209-227 must exceed the price of lot 208A in order for individual items to sell
Skidding and Load out charges: There will be loading and skidding charges added to your purchase at market rates for your convenience.
Location: Torrance, CA
Skidding: $2600
Load Out: $2600
Skidding and Load out charges:
There will be loading and skidding charges added to your purchase at market rates for your convenience.
**The 2nd Day of this auction is moving to March 31, 2022.**
AUCTION DATE: lots start closing on Thursday, November 4th and
the second day has moved to MArch 31, 2022 .
LOCATION: Torrance, California
INSPECTION: By appointment only. Please contact us to schedule. 818-495-3038
PICKUP: TBD
RIGGING:
There is no self-rigging. All Rigging and Load out will be completed by a contracted and approved Rigger.
18% Buyers Premium applies on all online purchases.
BidSpotter Customer Service Support Department
Have a question pertaining to the bidding process?
Visit our Frequently Asked Questions!
You can also start a live chat with a Bidspotter Support Representative by selecting Live Chat at the top of Bidspotter.com. More information on our chat system can be found by clicking here.
Customer Support Hours:
Email: support@bidspotter.com
Office: (253) 858-6777 Toll Free: (866) 597-2437
Terms of Sale Agreement:
SELLER RESERVES THE RIGHT TO ACCEPT OR REJECT ANY AND ALL BIDS
Inspection date (day only) is:
By Appointment Only. Call 818 495 3038 to Schedule.
Inspection locations:
Various Locations, call for specific item.
Inspection by appointment only.
Call or Email Logan Hillseth logan@chrishillsethenterprises.com or Patrick Hillseth at (818)495-3038 patrick@chrishillsethenterprises.com
Your question has been sent to the auctioneer.
There was an error sending your enquiry, why not try again later
1 - Used EV 037 Eccentric Lap Slicer / Crimper Machine with Pick in Place
** Please take into consideration that these items will not be pulled out of production and shipped if purchased until the end of March 2022**
Model: HD-ALRS-900M
Serial Number:M2582 - M2583
Volts: 115
Hz: 50/60
Phase: 0
Amps: 9
Pressure: 80PSI
Quality: Clean Nonlubricated. Dry to dew point of 40 degrees.
General Info:
The operater prepares the leading edge of the web from a new roll while the other supply roll is unwinding.
The splice may be initiated by a manual push button or by machine control logic, which also controls the entire sequence.
When the splice is initiated, the web clamps close, stopping and holding the webs.
the nip rolls then come together, joining the taped end of the new web and the running web.
Next, the kniffe fires, severing the running web.
The clamps then release, allowing the web to moce through the nip rolls. The lower rolls serve to bond the forwardedge of tyhe splice a second time. a set of belts ensure control of the leading edge of the new web as it passes between the set of nip rolls.
Finally, the nip rolls return to the open position.
BULK LOT: Sum of lots 209-227 must exceed the price of lot 208A in order for individual items to sell
Skidding and Load out charges: There will be loading and skidding charges added to your purchase at market rates for your convenience.
Location: Torrance, CA
Skidding: $2600
Load Out: $2600
General delivery information available from the auctioneer
Skidding and Load out charges:
There will be loading and skidding charges added to your purchase at market rates for your convenience.
**The 2nd Day of this auction is moving to March 31, 2022.**
AUCTION DATE: lots start closing on Thursday, November 4th and
the second day has moved to MArch 31, 2022 .
LOCATION: Torrance, California
INSPECTION: By appointment only. Please contact us to schedule. 818-495-3038
PICKUP: TBD
RIGGING:
There is no self-rigging. All Rigging and Load out will be completed by a contracted and approved Rigger.
18% Buyers Premium applies on all online purchases.
BidSpotter Customer Service Support Department
Have a question pertaining to the bidding process?
Visit our Frequently Asked Questions!
You can also start a live chat with a Bidspotter Support Representative by selecting Live Chat at the top of Bidspotter.com. More information on our chat system can be found by clicking here.
Customer Support Hours:
Email: support@bidspotter.com
Office: (253) 858-6777 Toll Free: (866) 597-2437
Terms of Sale Agreement:
SELLER RESERVES THE RIGHT TO ACCEPT OR REJECT ANY AND ALL BIDS
Inspection date (day only) is:
By Appointment Only. Call 818 495 3038 to Schedule.
Inspection locations:
Various Locations, call for specific item.
Inspection by appointment only.
Call or Email Logan Hillseth logan@chrishillsethenterprises.com or Patrick Hillseth at (818)495-3038 patrick@chrishillsethenterprises.com