0
FULL CATALOG COMING SOON... REGISTER TODAY!
1/4
Auctioneer has chosen not to publish the price of this lot
PASO ROBLES, California
8,00%
0%
Descripción
FEATURING:
Support Machinery :
2000 Sharp SED301 Die-Sinker EDM Machine s/n 0093360 w/ Sharp
AZ75 “FUZZY” Control Package, Heidenhain 3-Axis DRO, 11 ¾” x 23
5/8” Table, Fire Suppression System, Coolant and Filtration System, 423
Metered Hours.
2000 Sharp SH-1224 12” x 24” Automatic Hydraulic Surface Grinder s/n
0011F-04 w/ Sharp Controls,
Automatic Cycles, Wheel Dresser, Fine-Line Electromagnetic Chuck,
Coolant.
Thompson 6” x 18” Automatic Surface Grinder w/ Suburban 5” x 10”
Magnetic Chuck, Wheel Dresser,
Coolant.
2003 Ingersoll Rand IRN50H-CC 50Hp Rotary Air Compressor s/n
NV1459U03155 w/ Intellisys Digital Controls.
2003 Ingersoll Rand TMS0280 Refrigerated Air Dryer s/n 42528885.
Gardner-Denver mdl. BACABUC 25Hp Rotary Vane Air Compressor
w/ Precooler, 120 Gallon Tank.
Sullair SRD-105 Refrigerated Air Dryer s/n 003-D11472.
400 Gallon Air Storage Tank.
Hammond Roto-Finish Gemini Extended Range Series 48” Media
Tumbler s/n G-700- 00-B14.
Roto-Finish 21” Media Tumbler s/n ST-1C- 00-A22.
Willett Systems mdl. 3820 In-Line Inkjet Printer w/ iMage S8 Master
Controls.
2012 Thermo Scientific Heratherm OMH400 250 Degree Lab Oven s/n
41393406.
Quincy Lab mdl. 40GC 1500 Watt Lab Oven.
Kelvinator Scientific mdl. UC460-A14 Freezer s/n W11F-311971- XF.
Fabrication :
Minster-5 50 Ton OBI Stamping Press s/n 5D-101- 20831 w/ 18” x 28”
Bolster Area, 14” x 24” Ram Area, Crank Tilting Adjustment.
IPC mdl. TTM-HS2 12-Station Rotary Vertical Injection Molding Machine
s/n 10262 w/ IPC Controls, 25”Diameter Turret.
IPC mdl. TTM-HS2 12-Station Rotary Vertical Injection Molding Machine
s/n 10181 w/ IPC Controls, 25”Diameter Turret.
Novatec mdl. MD-15A Drying Hopper s/n 3-9305- 1757.
Novatec mdl. MD-15A Drying Hopper s/n 3-9054- 1726.
Remcor CA2000 Series Chiller.
Bunting Magnetics Magnetic Separator.
CNC Lathes :
2001 Hitachi Seiki Super HiCELL 250 5-Axis Twin Spindle Super
Productive Integrated Machining Cell Type CH250 s/n CH20170
w/ Hitachi Seiki Seicos Σ16T Controls, 30-4000 Main and Sub Spindle
RPM, 10”3-Jaw Power Main Chuck, 8” 3-Jaw Sub Spindle Power Chuck,
“C” Axis 0.001 Degrees on Main and Sub Spindles, (2) 20-Station Tooling
Magazines,
KV-45 Taper Tooling Pot, Live Milling thru Main Head, 80-8000 Live
Milling RPM, Milling Spindle Rigid Tapping, Parts Catcher, High Pressure
Coolant, Mayfran Chip Conveyor.
2001 Hitachi Seiki HiCELL23 II Super Productive Integrated Turning Cell
Type CA23 II s/n CA25344 w/Hitachi Seiki Seicos Σ18T Controls, Tool
Presetter, 10-Station Turret with KV-45 Taper Tooling Pots, 12-Station
Tooling Magazine, 4000 RPM, Tailstock, 10” 3-Jaw Power Chuck, Parts
Catcher, Mayfran Chip Conveyor, Coolant, LNS Quick Load Servo S2
Automatic Bar Loader / Feeder s/n 301152 w/ LNS Digital Controls.
2001 Mazak Super Quick Turn 100MS Twin Spindle Live Turret CNC
Turning Center s/n 156505 w/
Mazatrol PC-FUSION- CNC 640T Controls, Tool Presetter, 12-Station Live
Turret, 6000 RPM Live Tooling,Full “C” Axes on Main and Sub Spindles,
6” 3-Jaw Main Power Chuck, (NO SUB SPINDLE CHUCK), (4) Live
Turret Tooling, Parts Catcher, Tsubaki Chip Conveyor, Coolant, LNS Quick
Load Servo S2 Automatic Bar Loader / Feeder s/n 301183 w/ LNS Digital
Controls.
2000 Eguro Nuclet-10GL CNC Gang Tooling Cross Slide Lathe s/n 4161
w/ Fanuc Series 21i-T Controls, 5000 RPM Spindle, 5C Collet Closer,
7 1/8” x 30 ¼” Table, Gang Tooling, Coolant.
Electronics :
Schaefer Megomat ASM3001U Wire Processing Machine w/ Straightener,
AMP Crimp Quality Monitor,(2) APE300 Crimping Presses, OES
CFM5000 Crimp Force Meter, Schleuniger “Wire Stacker 1000”,Conveyors.
(3) AMP Champomator 3A Semi-Automatic Cable Terminating Machines.
Nanometer Technologies Fiber Optics Polisher.
AMP Detwister.
Tooling :
(55) KV-45 Live and Taper Tooling.
(110) CAT-40 Taper Tooling.
(8) Kurt 6” Angle-Lock Vises.
(30)5C Collets.
(8)Lista 11-Drawer, 10-Drawer, 8-Drawer and 6-Drawer Tooling
Cabinets.
Huot Toolscoot 40-Taper Tooling Cart.
(3) Snap-On Roll-A- Way Tool Boxes.
5C Indexing Head and Collet Closers.
Busch and Gast Vacuum Pumps.
(2) Pneumatic Presses.
Marking Methods Electrochemical Etcher.
Inspection :
Giddings & Lewis Cordax Discovery Series mdl. D12 CMM
Machine s/n P-1041- 0998 w/ Renishaw MIP Probe Head, Remote
Servo Controller, 18” x 30” x 15” Work Envelope, PC-DMIS
Operating Software,
Roller Stand.
Mitutoyo 12” Dial Height Gage.
Mueller Dial Groove Gage.
Mitutoyo Digital OD Mics.
Mitutoyo 6” Digital Caliper, 12” and 6” Dial Calipers.
Mitutoyo Dial Bore Gages.
SPI 2.4”-2.8” Bore Mic.
Mitutoyo 1”-2” and Import 2”-3” Thread Pitch Mics.
Mitutoyo 0-1”, Starrett 1”-2” Blade Mics and Mitutoyo 0-1” Disc
Mic.
Starrett and Mitutoyo 0-1” Anvil Mics.
Mitutoyo Digital Drop Indicator and Blake Universal Indicator.
Thread Ring and Plug Gage.
Starrett 15” Master Level.
Suburban 6” x 6” Sine Table.
Vermont Pin Gage Sets .625-.750, .501-.625, .251-.500, .061-.250,
.011-.060.
Starrett Crystal Pink 24” x 24” x 6 ½” Grade “A” Granite Surface
Plate w/ Roller Stand.
Auction Details
Rigging/Removals
T&Cs & Important Info
Ask seller a question
FEATURING:
Support Machinery :
2000 Sharp SED301 Die-Sinker EDM Machine s/n 0093360 w/ Sharp
AZ75 “FUZZY” Control Package, Heidenhain 3-Axis DRO, 11 ¾” x 23
5/8” Table, Fire Suppression System, Coolant and Filtration System, 423
Metered Hours.
2000 Sharp SH-1224 12” x 24” Automatic Hydraulic Surface Grinder s/n
0011F-04 w/ Sharp Controls,
Automatic Cycles, Wheel Dresser, Fine-Line Electromagnetic Chuck,
Coolant.
Thompson 6” x 18” Automatic Surface Grinder w/ Suburban 5” x 10”
Magnetic Chuck, Wheel Dresser,
Coolant.
2003 Ingersoll Rand IRN50H-CC 50Hp Rotary Air Compressor s/n
NV1459U03155 w/ Intellisys Digital Controls.
2003 Ingersoll Rand TMS0280 Refrigerated Air Dryer s/n 42528885.
Gardner-Denver mdl. BACABUC 25Hp Rotary Vane Air Compressor
w/ Precooler, 120 Gallon Tank.
Sullair SRD-105 Refrigerated Air Dryer s/n 003-D11472.
400 Gallon Air Storage Tank.
Hammond Roto-Finish Gemini Extended Range Series 48” Media
Tumbler s/n G-700- 00-B14.
Roto-Finish 21” Media Tumbler s/n ST-1C- 00-A22.
Willett Systems mdl. 3820 In-Line Inkjet Printer w/ iMage S8 Master
Controls.
2012 Thermo Scientific Heratherm OMH400 250 Degree Lab Oven s/n
41393406.
Quincy Lab mdl. 40GC 1500 Watt Lab Oven.
Kelvinator Scientific mdl. UC460-A14 Freezer s/n W11F-311971- XF.
Fabrication :
Minster-5 50 Ton OBI Stamping Press s/n 5D-101- 20831 w/ 18” x 28”
Bolster Area, 14” x 24” Ram Area, Crank Tilting Adjustment.
IPC mdl. TTM-HS2 12-Station Rotary Vertical Injection Molding Machine
s/n 10262 w/ IPC Controls, 25”Diameter Turret.
IPC mdl. TTM-HS2 12-Station Rotary Vertical Injection Molding Machine
s/n 10181 w/ IPC Controls, 25”Diameter Turret.
Novatec mdl. MD-15A Drying Hopper s/n 3-9305- 1757.
Novatec mdl. MD-15A Drying Hopper s/n 3-9054- 1726.
Remcor CA2000 Series Chiller.
Bunting Magnetics Magnetic Separator.
CNC Lathes :
2001 Hitachi Seiki Super HiCELL 250 5-Axis Twin Spindle Super
Productive Integrated Machining Cell Type CH250 s/n CH20170
w/ Hitachi Seiki Seicos Σ16T Controls, 30-4000 Main and Sub Spindle
RPM, 10”3-Jaw Power Main Chuck, 8” 3-Jaw Sub Spindle Power Chuck,
“C” Axis 0.001 Degrees on Main and Sub Spindles, (2) 20-Station Tooling
Magazines,
KV-45 Taper Tooling Pot, Live Milling thru Main Head, 80-8000 Live
Milling RPM, Milling Spindle Rigid Tapping, Parts Catcher, High Pressure
Coolant, Mayfran Chip Conveyor.
2001 Hitachi Seiki HiCELL23 II Super Productive Integrated Turning Cell
Type CA23 II s/n CA25344 w/Hitachi Seiki Seicos Σ18T Controls, Tool
Presetter, 10-Station Turret with KV-45 Taper Tooling Pots, 12-Station
Tooling Magazine, 4000 RPM, Tailstock, 10” 3-Jaw Power Chuck, Parts
Catcher, Mayfran Chip Conveyor, Coolant, LNS Quick Load Servo S2
Automatic Bar Loader / Feeder s/n 301152 w/ LNS Digital Controls.
2001 Mazak Super Quick Turn 100MS Twin Spindle Live Turret CNC
Turning Center s/n 156505 w/
Mazatrol PC-FUSION- CNC 640T Controls, Tool Presetter, 12-Station Live
Turret, 6000 RPM Live Tooling,Full “C” Axes on Main and Sub Spindles,
6” 3-Jaw Main Power Chuck, (NO SUB SPINDLE CHUCK), (4) Live
Turret Tooling, Parts Catcher, Tsubaki Chip Conveyor, Coolant, LNS Quick
Load Servo S2 Automatic Bar Loader / Feeder s/n 301183 w/ LNS Digital
Controls.
2000 Eguro Nuclet-10GL CNC Gang Tooling Cross Slide Lathe s/n 4161
w/ Fanuc Series 21i-T Controls, 5000 RPM Spindle, 5C Collet Closer,
7 1/8” x 30 ¼” Table, Gang Tooling, Coolant.
Electronics :
Schaefer Megomat ASM3001U Wire Processing Machine w/ Straightener,
AMP Crimp Quality Monitor,(2) APE300 Crimping Presses, OES
CFM5000 Crimp Force Meter, Schleuniger “Wire Stacker 1000”,Conveyors.
(3) AMP Champomator 3A Semi-Automatic Cable Terminating Machines.
Nanometer Technologies Fiber Optics Polisher.
AMP Detwister.
Tooling :
(55) KV-45 Live and Taper Tooling.
(110) CAT-40 Taper Tooling.
(8) Kurt 6” Angle-Lock Vises.
(30)5C Collets.
(8)Lista 11-Drawer, 10-Drawer, 8-Drawer and 6-Drawer Tooling
Cabinets.
Huot Toolscoot 40-Taper Tooling Cart.
(3) Snap-On Roll-A- Way Tool Boxes.
5C Indexing Head and Collet Closers.
Busch and Gast Vacuum Pumps.
(2) Pneumatic Presses.
Marking Methods Electrochemical Etcher.
Inspection :
Giddings & Lewis Cordax Discovery Series mdl. D12 CMM
Machine s/n P-1041- 0998 w/ Renishaw MIP Probe Head, Remote
Servo Controller, 18” x 30” x 15” Work Envelope, PC-DMIS
Operating Software,
Roller Stand.
Mitutoyo 12” Dial Height Gage.
Mueller Dial Groove Gage.
Mitutoyo Digital OD Mics.
Mitutoyo 6” Digital Caliper, 12” and 6” Dial Calipers.
Mitutoyo Dial Bore Gages.
SPI 2.4”-2.8” Bore Mic.
Mitutoyo 1”-2” and Import 2”-3” Thread Pitch Mics.
Mitutoyo 0-1”, Starrett 1”-2” Blade Mics and Mitutoyo 0-1” Disc
Mic.
Starrett and Mitutoyo 0-1” Anvil Mics.
Mitutoyo Digital Drop Indicator and Blake Universal Indicator.
Thread Ring and Plug Gage.
Starrett 15” Master Level.
Suburban 6” x 6” Sine Table.
Vermont Pin Gage Sets .625-.750, .501-.625, .251-.500, .061-.250,
.011-.060.
Starrett Crystal Pink 24” x 24” x 6 ½” Grade “A” Granite Surface
Plate w/ Roller Stand.
MULTI AXIS "MAZAK" CNC MACHINING FACILITY
Sale Date(s)
Dirección de la sala
1610 COMMERCE WAY
PASO ROBLES
California
93446
United States
For American Auctioneers Group delivery information please telephone (818) 763-2021.
Información importante
BidSpotter Customer Service Support Department
To reach a member of our qualified support staff regarding information or questions pertaining to the bidding process; please reach us by phone or email.
- Available Monday – Friday, 8:00am – 12:00am ET.
- Email: Support@bidspotter.com
- Office: 253-858-6777
- Frequently Asked Questions
Condiciones
Terms and Conditions
BY REGISTERING TO BID ON LINE, ALL Registered BIDDERS ARE AGREEING TO ALL THE FOLLOWING TERMS AND CONDITIONS:
1) If registering online, all registered bidders must provide email address and fax number in order to process proper invoice.
2) Bidders by registering assume a legal responsibility to pay for lots sold to him with no exchanges, refunds, adjustments, or refusals.
PURCHASERS ARE TO SATISFY THEMSELVES AS TO CONDITIONS, QUALITY AND DESCRIPTION OF LOTS BEFORE BIDDING.
3) All lots are offered AS IS, WHERE IS, and become the property and responsibility of the bidder at time of the sale.
All lots to be sold as shown, with all faults, imperfections and errors of description. All SALES ARE FINAL.
4) No warranties or guarantees, expressed or implied are made by the auctioneer, concerning the accurace of description, genuineness, authenticity, or condition of lots.
5) A 18% BUYERS PREMIUM WILL BE PAID BY THE BUYER AS PART OF THE PURCHASE PRICE.
6) American Auctioneers Group, Inc. are not responsible for accidents, damage or loss of any kind to bidders, persons online or their property. We cannot be responsible and assume no liability for the packing, loading or securing of merchandise to your vehicle or truck.
All winning bidders are responsible to hire an insured rigger for the removal of items.
7) All purchases must be removed from the premises in the time allocated, as announced by the auctioneer.
8) A deposit of 25% of purchases will be required of every buyer. The deposit and final payment must be paid for by CASH, CASHIER'S CHECK OR WIRE TRANSFER BEFORE REMOVAL.
Deposits will not be returned if, items are not removed or paid for within the time announced or posted.
9) All buyers shall, at the time of purchase pay any state and local taxes, unless documentation is on file with AAG exempting from such taxes.
10) While quantities and description are believed to be correct, there are no guarantees and the auctioneers, owners, and advertising counsel will not be held responsible for advertising discrepancies, inaccuracies or failure of merchandise to correspond with any standard expected. All lots shall auctioned and bid upon lot number.
11) The auctioneer shall in no event be liable to the purchaser for non delivery of any lot for any reason except for the return to the purchaser of the deposit or money paid on such non delivered lots.
.
ANY ITEMS NOT REMOVED ON OR BEFORE THE REMOVAL DATE SHALL BE DEEMED ABANDONED AND WILL BE REMOVED AND SCRAPPED AT THE BUYERS EXPENSE
12) ALL SALES IN U.S. DOLLARS ONLY
13) If you do not have a credit card to register with bidspotter, then please call our office at 818-763-2021 and make arrangements to overnight checks.
14) PAYMENTS MUST BE MADE OR WIRE INITIATED BY CLOSE OF BUSINESS THE DAY AFTER THE SALE. Credit card authorization and company checks (not accompanied by bank letter) are for deposit only, and in the case of company checks (not accompanied by bank letters), will be returned to customer once full payment in cash, cashier's check or wire transfer is made.
INTERNET BUYERS PREMIUM IS 18%.
ALL SALES TAX WILL BE SUBJECT TO LOCAL SALES TAX.
AAG OFFICE NUMBER IS 818-763-2021
AAG FAX NUMBER IS 818-291-9495
Cash, Cashier check, or Wire transfer ONLY.
Credit Card is required for registrations but cannot be used for purchases.
