Metalworking

JET 14" BENCH DRILL PRESS, MODEL JDP-14J, 1/2" CHUCK, 115V, SINGLE PHASE, 1/2 HP, 5-SPEEDS, S/N 1010015

JET 8” SHOP BENCH GRINDER BOLTED ON SKID

JET 8” BENCH GRINDER

JET 8” BENCH GRINDER WITH STAND

6” Jet Double End Grinder Model JBG-6A, Stock Number 577101, 1/2 HP Motor, 60 Hz, 5 Amps, 3450 RPM, 1/2” Arbor

JET 6" DOUBLE END GRINDER, 1/2 HP, W/ STAND

6” Jet Bench Double End Grinder Model JBG-6A, S/N 13100874, 1/2 HP, 1 Ph, 115V, 60 Hz, 5 Amp, 3450 RPM

JET 2-TON ARBOR PRESS, NO. 2

Stratasys OBJ-01200, Water jet system, In the original box

Jet Bench Grinder Location: Plainfield CT

Hines "Dominator" Crank Shaft Balance Driling Machine w/ Jet Drillling Head (SOLD AS-IS - NO WARRANTY)

Jet GH-1660ZX Geared Head Precision Lathe S/N 05457, Tail Stock

Rotoman Webfeed Tension System Jet Web edge control Model: BK012 Year: 1997 Serial No: 9544/03 Asset No: 162 Location: Offset Print upper gantry...

Jet #J2550 20" Drill Press, S/N 18112417, 120 Volt (Bldg. 36)

Jet J-2500 Pedestal Drill Press 5/8'' Drilling Capacity, 15'' , 200 - 3630 Max RPM, 3/4 HP, 60hz, Volts 115/230, Amp 9.0/4.5, Single Phase S/N 100...

Jet J-2500 Pedestal Drill Press 5/8'' Drilling Capacity, 15'' , 200 - 3630 Max RPM, 3/4 HP, 60hz, Volts 115/230, Amp 9.0/4.5, Single Phase S/N 100...

Jet Double End 8" Bench Grinder, 120V

JET GEAR HEAD DRILL PRESS, M# GHD-20PF, S/N 110301137, VISE

Jet geared head engine lathe, Model 1440-3PGH ***{Simple Rigging and Loading Fee: $500}***

Jet Gap Bed Lathe, GH-1440ZX, (2) 3-Jaw and (1) 4-Jaw Chuck, DRO, 3" Thru Spindle, S/N#061223ZX1421

Jet Drill Press, 20", Model JDP-20MF, S/N 22042058, 1-1/2 HP, 115/230 V, 5/8" Chuck, Variable Speed, 16" x 13-1/2" Table

JET DRILL PRESS MODEL OR-2501F, STOCK 354166, S/N D2900022, 12 SPEED, 20 1/2" SWING, 3/4" CHUCK, SPINDLE MT#3, 1 PHASE, 1 HP MOTOR

Jet Turning Tool Kit

JET J-2500 15" Floor Drill Press with Plastic Guards, 60Hz, 110v. SN# 22049384. HIT# 2429522. Asset Located at 4100 N Powerline Road Suite H5, Po...

Jet Model GH-1440ZX Geared Head Precision Lathe. SN# 070423zx1523. HIT# 2515833. Loc: Shop. Asset Located at 1220 2nd Avenue N., Kent, WA 98032.

JET 8 INCH SHOP BENCH GRINDER

12" X 40" JET TOOLROOM LATHE MODEL 1240PY, COLLET CHUCK

Jet Geared Head Engine Lathe, Model 1768PHG, S/N P7705-042, 7.5 HP, 3PH, 220/440 V, 17" Swing, 68" Centers, w/ Steady Rest, & Extra Chuck

Lot of jet bench grinder, blade recycler, ***{Simple Rigging and Loading Fee: $75}***

Jet JRD-750 Radial Arm Drill, 3PH, 220/440 V, S/N 881171, 30" x 20" Table

Jet JDP-17MF 16-1/2" Single Spindle Pedestal Drill Press, S/N 208062

Jet GHB-1340 A Lathe, 1-1/4" Thru, Steady Rest, Tail Stock, 3-Jaw Chuck, S/N#09022103A

Jet 6'' Bench Grinder Location: Swansea MA

Jet Dual 8" Bench Grinder on pedestal. (please note: lot located in building C-50)

Jet Gap Bed Lathe Model GHB-1340A, 3-Jaw Chuck, Aloris Tool Holder, Tail Stock, 1-3/8" Thru Spindle, S/N#14043012A, 1-Phase, Steady Rest, Face Pla...

Jet Gap Bed Lathe Model GHB-1340-A, 3-Jax Chuck, Aloris Tool Holder, Tail Stock, 1-3/8" Thru Spindle, S/N#21013785A, 1-Phase, Steady Rest

Jet 20" Floor Drill Press - Model J-2550

Assorted Hoists, CM Cyclone, Jet Mini-Mite Pullet etc., on pallet

Craftsman 16" Electric Chainsaw, Jet 8" Double End Grinder, (2) Wire Tapes, & (2) Clip Ring Removers

Jet JBG-10A 10" Double End Shop Bench Grinder

Jet Variable Speed Drill Press. Model JDP-20VS-3. Electric, 3ph, 230V. Used. Appears complete. Comes with additional bits. See pictures.

JET (2010) GH-1440ZX GAP BED ENGINE LATHE WITH 14" SWING OVER BED, 23" SWING IN THE GAP, 40" BETWEEN CENTERS, 3" SPINDLE BORE, 10" 3-JAW CHUCK, SP...

JET JE24X100 GAP BED ENGINE LATHE WITH 24" SWING OVER BED, 33" SWING IN THE GAP, 100" BETWEEN CENTERS, 2.5" SPINDLE BORE, 10" 3-JAW CHUCK, SPEEDS ...

JET (2010) JTM-1 VERTICAL TURRET MILLING MACHINE WITH 9" X 42" TABLE, SPEEDS TO 2720 RPM IN 8 STEPS, R8 SPINDLE COLLET, ANILAM 2 AXIS DRO, S/N 101...

JET J-A5816 15" VARIABLE SPEED FLOOR TYPE DRILL PRESS S/N 10100341 (CI)