Refine your search

Sale Section

Estimate

Filter by Price Range

Primary Category

Category

Brand

Item Type

Auction Details

SURPLUS TO THE ONGOING OPERATION OF A MAJOR MEDICAL MANUFACTURER

Strand Industrial Auctions SURPLUS TO THE ONGOING OPERATION OF A MAJOR MEDICAL MANUFACTURER: New lots and descriptions added 5-2-18 Timed Online Auction Ended May 31, 2018 4:09pm CDT

Sale Date(s)

  • Ended May 31, 2018 4:09pm CDT
Ramsey, Minnesota

Venue Address

  • 6815 McKinley Street NW
  • Ramsey
  • Minnesota
  • 55303
  • United States

Auction Details

Important Information Terms and Conditions
Currency: USD
Buyer's premium: 16.00%
Tax on hammer: 7.125%

Auctioneer Details

There are 51 item(s) within this sale
  • List
  • Grid
  • Lots per page
  • 60
  • 120
  • 240

This auctioneer has chosen to not publish their results. Please contact them directly for any inquiries.

Steel Roller Cart Dimensions: 74”-L X 25”-W X 44” H, Lift and Load $ Cart, Mach. #N/A, Asset #N/A

Lot 1

Steel Roller Cart, Dimensions: 74”-L X 25”-W X 44” H, Mach. #N/A, Asset #N/A. 

More details

Thermo Neslab Model Merlin Series M100 Water Chilling Unit, High Pressure=400 PSI, Low Pressure=

Lot 3

Thermo Neslab Model Merlin Series M100 Water Chilling Unit, High Pressure=400 PSI, Low Pressure=150 PSI, Approx. Machine Dimensions: 22” X 30” X 3...

More details

Nomura Type NS-PS 1022 Pneumatic Secondary Chucking Machine, S/N: 800365?, Bar Capacity Dia. 0.

Lot 4

Nomura Type NS-PS 1022 Pneumatic Secondary Chucking Machine, S/N: 800365, Bar Capacity Dia. 0.040” - 0.390”, Bar Capacity Length 0.040” - 1.180, M...

More details

Citizen B12 Swiss Type Screw Machine, S/N: Z2813, Mfg. 1995, Cincom CNC Control, Max. Machining Dia.

Lot 5

Citizen B12 Swiss Type Screw Machine, S/N: Z2813, Mfg. 1995, Cincom CNC Control, Max. Machining Dia. 12mm, Max. Machining Length (single chucking)...

More details

Imeca Genius Model 112 Magazine Type Bar Feed, S/N: 020615BA04, Mfg. 2006, Bar Capacity: .040” -.

Lot 6

Imeca Genius Model 112 Magazine Type Bar Feed, S/N: 020615BA04, Mfg. 2006, Bar Capacity: .040” -.500”, Max Bar Length 12’, Linear Inch Magazine Ca...

More details

Nomura Type NS-PS 1022 Pneumatic Secondary Chucking Machine, S/N: 20644, Bar Capacity Dia. 0.

Lot 7

Nomura Type NS-PS 1022 Pneumatic Secondary Chucking Machine, S/N: 20644, Bar Capacity Dia. 0.040” - 0.390”, Bar Capacity Length 0.040” - 1.180, Ma...

More details

Temptek Model VTO-2100, S/N: 105948, Mfg. 1-22-08, Heater 12 KW, Process Pump: 1 HP, 30 GPM, 24 PSI,

Lot 8

Temptek Model VTO-2100, S/N: 105948, Mfg. 1-22-08, Heater 12 KW, Process Pump: 1 HP, 30 GPM, 24 PSI, Temp. Range 100 – 400° (F), 230V 3PH 60HZ, Ap...

More details

SMW Type QS20 Bar Feed, S/N: 3.123 Dimensions: 192”-L X 40”-W X 42”-H with Sameca Type QS2 Power

Lot 9

SMW Type QS20 Bar Feed, S/N: 3.123 Dimensions: 192”-L X 40”-W X 42”-H with Sameca Type QS2 Power Hydraulic Unit, Type QS2, #FAB 123, Dimensions: 2...

More details

Compact Manufacturing Systems (CMS) Model GT XPRESS, S/N: GA1542732X, Fagor CNC Control, Max Bar

Lot 10

Compact Manufacturing Systems (CMS) Model GT XPRESS, S/N: GA1542732X, Fagor CNC Control, Max Bar Capacity 1-1/16”, Travels: X axis 12”, Z Axis 6.5...

More details

Nomura Type NS-PS 1022 Pneumatic Secondary Chucking Machine, S/N: 50270, Bar Capacity Dia. 0.

Lot 11

Nomura Type NS-PS 1022 Pneumatic Secondary Chucking Machine, S/N: 50270, Bar Capacity Dia. 0.040” - 0.390”, Bar Capacity Length 0.040” - 1.180, Ma...

More details

Arburg Type ALLROUNDER 221-75-850 Injection Molder, S/N: 150478 Mfg. 1991, Clamp Force 35 Tons,

Lot 12

Arburg Type ALLROUNDER 221-75-850 Injection Molder, S/N: 150478 Mfg. 1991, Clamp Force 35 Tons, Screw Diameter 25 mm, Shot Weight: 41 g, Injection...

More details

Hardinge Lathe retrofitted with Omniturn / Fagor Programmable Control.

Lot 13

Hardinge Lathe retrofitted with Omniturn / Fagor Programmable Control. Machine Approx.  Dimensions: 72” L-R X 36” F-B X 68” H.Approx. Weight: 2,00...

More details

Fume Fighter Dimensions: 17.5” L-R X 223” F-B X 36” H, Lift and Load $ Mach. #N/A, Asset #N/A

Lot 14

Fume Fighter, Vari-Speed Control, Dimensions: 17.5” L-R X 223” F-B X 36” H, Mach. #N/A.

More details

Citizen Model B12 Swiss Type Screw Machine, S/N: Z13898, Mfg. 2001, Pick-off, Back Work, Side

Lot 15

Citizen Model B12 Swiss Type Screw Machine, S/N: Z13898, Mfg. 2001, Pick-off, Back Work, Side Drilling and Milling, Cincom CNC Control, Max. Machi...

More details

Nomura Type NS-PS 1022 Pneumatic Secondary Chucking Machine, S/N: 821621?, Bar Capacity Dia. 0.

Lot 16

Nomura Type NS-PS 1022 Pneumatic Secondary Chucking Machine, S/N: 821621?, Bar Capacity Dia. 0.040” - 0.390”, Bar Capacity Length 0.040” - 1.180, ...

More details

Como Pro Center Plus Model CTR-200-1 Miro-Abrasive Blaster, S/N: PC896, Size: 30” wide X 46” High

Lot 17

Como Pro Center Plus Model CTR-200-1 Miro-Abrasive Blaster, S/N: PC896, Size: 30” wide X 46” High X 34” Deep, Interior Space 2.2 Cu.ft. / Approx. ...

More details

Edge Technology Model C-320 Magazine Type Bar Feed, S/N: C4201246319, Mfg. 2012, Approx. Dimensions:

Lot 18

Edge Technology Model C-320 Magazine Type Bar Feed, S/N: C4201246319, Mfg. 2012, With Hi-Tech Electronics Corp. Panel, Approx. Dimensions: 190” –L...

More details

SPX Flow Technology Model HHS-165, Air Dryer, S/N: 1000002908763, Inlet Flow @100% PSIG (6.7 barg)

Lot 19

SPX Flow Technology Model HHS-165, Air Dryer, S/N: 1000002908763, Inlet Flow @100% PSIG (6.7 barg) scfm 165, nm3/h 280, inlet / Outlet, Connection...

More details

Nomura Model NN-13SII CNC Swiss Type Automatic Turning Machine, S/N: 85079803, 3 Live Cross Stations

Lot 20

Nomura Model NN-13SII CNC Swiss Type Automatic Turning Machine, S/N: 85079803, 3 Live Cross Working Stations, 5 StaticTool Stations, 4 Position Ba...

More details

Nomura Type NS-PS 1022 Pneumatic Secondary Chucking Machine, S/N: 801280, Bar Capacity Dia. 0.040” -

Lot 21

Nomura Type NS-PS 1022 Pneumatic Secondary Chucking Machine, S/N: 801280, Bar Capacity Dia. 0.040” - 0.390”, Bar Capacity Length 0.040” - 1.180, M...

More details

Imeca Genius 112 Magazine Type Bar Feed, S/N: 020638BA06, Mfg. 2006, Bar Capacity: .040” -.500”, Max

Lot 22

Imeca Genius 112 Magazine Type Bar Feed, S/N: 020638BA06, Mfg. 2006, Bar Capacity: .040” -.500”, Max Bar Length 12’, Linear Inch Magazine Capacity...

More details

Citizen CAV 20L IS Magazine Bar Feed, S/N: CAV0421B, Mfg. 2004, Capacity: ¾” X 12’, Used on L20

Lot 23

Citizen CAV 20L IS Magazine Bar Feed, S/N: CAV0421B, Mfg. 2004, Capacity: ¾” X 12’, Used on Citizen L20, Dimensions: 195" L  X  31" W  X 51" H, Ma...

More details

Branson Model B-400-R Ultrasonic Vapor Degreaser, S/N: 11-1227-97, 10” X 12” X 8” Dual? Sump,

Lot 24

Branson Model B-400-R Ultrasonic Vapor Degreaser, S/N: 11-1227-97, 10” X 12” X 8” Sump, Sprsy Wand, Frequency Power 40 kHz, Wand? 230V, 60Hz, 1 PH...

More details

Huei Shang Industrial Co. Model HR-75D Wire Pay Off System, S/N: A7461 Mfg. 2007/08, Table

Lot 26

Huei Shang Industrial Co. Model HR-75D Wire Pay Off System, S/N: A7461 Mfg. 2007/08, Table Diameter 25”, Max Load of Material 150 Lbs., Max Table ...

More details

Nomura Type NS-PS 1022 Pneumatic Secondary Chucking Machine, S/N: 810569, Bar Capacity Dia. 0.040” -

Lot 27

Nomura Type NS-PS 1022 Pneumatic Secondary Chucking Machine, S/N: 810569, Bar Capacity Dia. 0.040” - 0.390”, Bar Capacity Length 0.040” - 1.180, M...

More details

Rexnord Corporation Hydraulic Pump, 3 HP, Approx. Pallet Dimensions: 57” X 30” X

Lot 29

Rexnord Corporation Hydraulic Pump, Reservoir Capacity 15 gal., 3HP, 230/460 Volt,Order Number 973388-0196,  Approx. Pallet Dimensions: 57” X 30” ...

More details

Hardinge Conquest Model CS-GT Super Precision Gang Tool CNC Lathe, S/N: GT-203, With GE Fanuc Series

Lot 30

Hardinge Conquest Model CS-GT Super Precision Gang Tool CNC Lathe, S/N: GT-203, Minimum Use Since Rebuild in 2008, GE Fanuc Series O-T CNC Control...

More details

Nomura Type NS-PS 1022 Pneumatic Secondary Chucking Machine, S/N: 30753, Bar Capacity Dia. 0.

Lot 31

Nomura Type NS-PS 1022 Pneumatic Secondary Chucking Machine, S/N: 30753, Bar Capacity Dia. 0.040” - 0.390”, Bar Capacity Length 0.040” - 1.180, Ma...

More details

Nomura NN-13S CNC Swiss Type Automatic Turning Machine, S/N: 84049802, 3 Live Cross Stations

Lot 32

Nomura NN-13S CNC Swiss Type Automatic Turning Machine, S/N: 84049802, 3 Live Cross Working Stations, 5 StaticTool Stations, 4 Position Back End W...

More details

Baldor Double End Grinder, Cat No. 81072 Wheel Size, ¾ HP, 115/230 1 PH, Dimensions: 24” L-R X 20”

Lot 33

Baldor Double End Grinder, Cat No. 81072, ¾ HP, 115/230 1 PH, Dimensions: 24” L-R X 20” F-B X 43” H, Mach. #N/A 

More details

Spego Model 123-7Z Bar Feed, 3 Guide Set, Capacity 1/8” to 7/8” , with Z-SORB, Approx. 180” Long,

Lot 36

Spego Model 123-7Z Bar Feed, 3 Guide Set,  Capacity 1/8” to 7/8” , with Z-SORB, Approx. 180” Long, Approx. Weight: 700 Lbs. Lift and Load Charge $...

More details

IMECA GENIUS 120 Magazine Type Bar Feed, S/N: 02076BA03, Mfg. 2007, Bar Capacity .40”-.787”, Bar

Lot 37

IMECA GENIUS 120 Magazine Type Bar Feed, S/N: 02076BA03, Mfg. 2007, Bar Capacity .40”-.787”, Bar Length 12’, Magazine Capacity 8.5, Max Feed Speed...

More details

Edge Technology Model FMB Minimag 18 Magazine Type Bar Feed, S/N: 47-161- 761/ R:611 609, Max. Bar

Lot 38

Edge Technology Model FMB Minimag 18 Magazine Type Bar Feed, S/N: 47-161- 761/ R:611 609, With FMB Control Panel, Max. Bar Capacity 18mm X 12’,  A...

More details

Citizen Cincom A16 VIP Swiss Type CNC Screw Machine S/N: AA5053 Mfg. 2005, Fanuc Oi-TB CNC

Lot 39

Citizen Cincom A16 VIP Swiss Type CNC Screw Machine S/N: AA5053 Mfg. 2005, Fanuc Oi-TB CNC Control, 3 Station Live Milling, 5 Static Tools, 4 Posi...

More details

Edge Technologies Model C-320 Magazine Type Bar Feed, S/N: C4201246320, Mfg. 2012, Approx.

Lot 40

Edge Technologies Model C-320 Magazine Type Bar Feed, S/N: C4201246320, Mfg. 2012, With Hi-Tech Electronics Corp. Control Panel, Approx. Dimension...

More details

Lista 20 Drawer Cabinet Dimsions: 28” L-R X 28” F-B X 66”- H, Lift and Load $ Mach. #N/A, (Need more

Lot 41

Lista 20 Drawer Cabinet Dimsions: 28” L-R X 28” F-B X 66”- H, Mach. #N/A, Lift and Load $50.00

More details

Upgrade Technologies (CMS) Model ACCUTURN GT-27 CNC Gang Type Lathe, S/N: BJ51206D, Fagor CNC

Lot 43

Upgrade Technologies (CMS) Model ACCUTURN GT-27 CNC Gang Type Lathe, S/N: BJ51206D, Fagor CNC Control, Max Bar Capacity 1.0625” (27mm),Max Turning...

More details

Citizen B12 Swiss Type Screw Machine, S/N: Z2628, Mfg. 1995, Cincom CNC Control, Max. Machining Dia.

Lot 44

Citizen B12 Swiss Type Screw Machine, S/N: Z2628, Mfg. 1995, Cincom CNC Control, Max. Machining Dia. 12mm, Max. Machining Length (single chucking)...

More details

Citizen CAV 20L IS Magazine Bar Feed, S/N: CAV1228B, Mfg. 2009, Capacity: ¾” X 12’, Used on L20

Lot 45

Citizen CAV 20L IS Magazine Bar Feed, S/N: CAV1228B, Mfg. 2009, Capacity: ¾” X 12’, Used on Citizen L20, Dimensions: 195" L X  31" W  X 51" H, Mac...

More details

Nomura Type NS-PS 1022 Pneumatic Secondary Chucking Machine, S/N:810364, Bar Capacity Dia. 0.

Lot 46

Nomura Type NS-PS 1022 Pneumatic Secondary Chucking Machine, S/N:810364, Bar Capacity Dia. 0.040” - 0.390”, Bar Capacity Length 0.040” - 1.180, Ma...

More details

Citizen CAV 20L IS Magazine Bar Feed, S/N:CAV0385B, Mfg. 2004, Capacity: ¾” X 12’, Used on L20

Lot 47

Citizen CAV 20L IS Magazine Bar Feed, S/N:CAV0385B, Mfg. 2004, Capacity: ¾” X 12’, Used on Citizen L20, Dimensions: 195" L X 31" W X 51 "H, Mach. ...

More details

Mistbuster Mist Collector. Vari-speed Control

Lot 48

MistBuster Mist Collector. Vari-Speed control, Lift and Load Charge: $ 50.00

More details

Nomura Type NS-PS 1022 Pneumatic Secondary Chucking Cabinet of Misc. Spare Parts and Tooling

Lot 49

Nomura Type NS-PS 1022 Cabinet of Miscellaneous Spare Parts and Tooling.  

More details

Teel Model 4XZ19 Coolant Pump, ¼ HP, 230 / 460 Volt, 3PH

Lot 50

Teel Model 4XZ19 Coolant Pump, ¼ HP, 230 / 460 Volt, 3PH

More details
Loading...Loading...
  • Lots per page
  • 60
  • 120
  • 240

Recently Viewed Lots