Vibra Screw Inc. bean unloading hopper, model Bulk Bag Unloader, s/n BBU2002184, 48"x 48" SS hopper, with 16" Silina vortex manula valve, Into 38"...

Hapman bear receiving hopper, s/n H09144-AF, 24" cone bottom s/s hopper, with Ametek 10 hp, vacuum drive, into 48" cone bottom hopper, with 8" SS ...

[Lot] Vibra Screw Inc. soy bean hopper, model 202185, SS bean feeder with manual, with Eriez metal detector model 993755, (SUBJECT TO BULK BID OF ...

[Lot] Stainless steel hopper and auger, 36' x 36" hopper with 12' x 7-1/4" auger, , (SUBJECT TO BULK BID OF LOTS 103-118) ...[more]

[Lot] Pre-soak tank, heat exchanger & pump, 100 gallon SS cone bottom pre-soak tank with manhole, Alfa Laval plate heat exchanger model M6-MFG and...

Corenco turbo disintegrator mill, with Teco-Westinghouse 3 phase,1770 rpm, 75 hp drive, mounted on SS rolling cart, (SUBJECT TO BULK BID OF LOTS 1...

Waukesha positive pump, model 0602U2, s/n 2770159-R1-3, with manual (2012), (SUBJECT TO BULK BID OF LOTS 103-118) ...[more]

Custom Fabricated hydration holding tube, two connected stations with insulated SS pipework, each station has twelve 2-1/2" x 45' long SS piping, ...

Custom Fabricated cooker-sterilizer tube, all stainless construction, 3" SS pipework, 21' long x 21" wide x 11' high, (SUBJECT TO BULK BID OF LOTS...

Corenco turbo disintegrator mill, model M8PT, with Teco-Westinghouse 3 phase,1770 rpm, 75 hp drive, mounted on SS rolling cart, (SUBJECT TO BULK B...

Tetra Pak homogenizer, model Tetra Alex 200,  s/n 5856932090, type TA200/210 bar, with manual, with new extra pistons and attachments to change ga...

Centrisys decanter centrifuge, model CS-21-4, with SS support deck, Viscotherm control panel and hydraulic pump, (SUBJECT TO BULK BID OF LOTS 103-...

Solid waste auger, two sections: (1) 11' x 7" section and, (1) 30' x 7" incline section leading to outside loadout platform, (SUBJECT TO BULK BID ...

Solid waste loadout assembly, includes complete structure, foot print 30' wide x 25' deep, lowest point is 12' 2" from bottom of catwalk to ground...

Raw waste recovery tank, free standing, SS flat bottom with manhole, 42"W x 48"H approx. 287 gallons, (SUBJECT TO BULK BID OF LOTS 103-118) ...[m...

Waukesha positive pump, model 060U2, (2012), (SUBJECT TO BULK BID OF LOTS 103-118) ...[more]

Hot water holding tank, SS double wall insulated flat bottom tank, 68"W x 61"H approx. 800 gallons, (SUBJECT TO BULK BID OF LOTS 103-118) ...[mor...

Leeson centrifugal pump, model C6T34WC13B, s/n 116776, with Leeson washguard 1-1/2 hp drive, (SUBJECT TO BULK BID OF LOTS 103-118) ...[more]

Centrifugal pump, with Baldor Super E drive, (SUBJECT TO BULK BID OF LOTS 103-118) ...[more]

Double vacuum tanks, (2) vaccum SS dome bottom tanks, with (2) MTH vacuum pumps, (2) Fristam pumps, and SS platform. Tank (1) approx. 360 gallons,...

[Lot] Bulk bid of lots 103-118. Bid must exceed lot totals by 10%. ...[more]

COP tank, SS tank 52" L x 22" W x 18" D, with pump

AGC plate heat exchanger, model Pro-31, s/n 2267, all stainless construction, with Ceslomagnetics Magnetic Separator (2002)

Mueller SS horizontal blend tank, 6,000 gallon, with double top mounted twin blade agitators, 16' long x 8-1/2 wide

Mueller SS horizontal blend tank, 6,000 gallon, with double top mounted twin blade agitators, 16' long x 8-1/2' wide.

HTST System, all SS mounted on SS frame, with AGC Pro-2-SH / 03313 plate heat exchanger, and Enerquip heat exchanger VEN-Utube type / serial no. 6...

Breddo Likwifier, model LDDW, s/n 97738 143676-3, 250 gallon tank 48" x 48"x 36", 25 hp, with manhole mounted on SS work platform 89' x 79" x 39" ...

CIP System, (3) SS tanks mounted on SS skid, with additive assembly & Baldor Standard E drive, Fristam pump, model FpX7420202246, (1) cone bottom...

Stainless steel tank, free standing, SS cone bottom auxilliary tank, with manhole, 300 gallons approx.

[Lot] Stainless pipework, located in process room includes: inline refractometer, (5) flow valves and assorted auto valves, 2' throught 4" SS pipe...

[Lot] Panel control cabinets, (2) steel cabinets upstairs, (1) SS cabinet downstairs, with contents

Walker silo, model VSHT, s/n SPG-59715, 304 SS jacketed, 143" OD. 30,000 gallons, (Never hooked up since original placement) (2006) ...[more]

Walker silo, model VSHT, s/n SPG-34183, 304 SS jacketed, 143" OD. 15,000 gallons with side bottom mounted agitator (2002) ...[more]

Walker silo, model VSHT, s/n SPG-34184, 304 SS jacketed, 143" OD. 15,000 gallons with side bottom mounted agitator (2002) ...[more]

Hot water holding tank, SS 15,000 gallons approx. capacity, with (2) pumps & (2) USF Filtration and Separations Filterite filters, model T910448-0...

Fristam load out pump, model FPX3541-180, s/n FPX35410202897, with SS cover

[Lot] Stainless steel pipework & valves, assocatied with outside silos, (9) GEA, (1) Endress + Hauser Pro Mag 50

Stainless steel jacketed blending tank 1,500 gallons with central agitator and motor ...[more]

Feldmeier vertical blend tank, SS 4,000 gallon, slant bottom, insulated non-jacketed, with top mounted agitator, with gearbox 40:1 ratio & drives,...

Feldmeier vertical blend tank, SS 4,000 gallon, slant bottom, insulated non-jacketed, with top mounted agitator, with gearbox 40:1 ratio & drives,...

AGC plate heat exchanger, model Pro 2-SH, s/n 6185, max heat 250 F, max press, 150 psi (2006)

Ampco positive displacement pump, model ZP2-130-SM, s/n CC-87848-1-1, with reducer 30:1 & 10hp drive, 3 ports

[Lot] Stainless pipework, located in filling room

DCI stainless steel supply tank, s/n 93-D-47303-B, 500 gallon jacketed, with manhole, top mounted agitator, with gear box and drive, with Waukesha...

DCI stainless steel supply tank, s/n 93-D-47303-A, 500 gallon jacketed, with manhole, top mounted agitator, with gear box and drive, with Waukesha...

Tri-Clover positive displacement pump, model PRED06-2m-UC4-SL-S, s/n ZO 290, rotary pump, with APG Dodge reducer. 17:1 ratio, 3 hp drive

Alfa Laval positive displacement pump, model 5RU2-013-LD, s/n 4387 30A, flavor pump, with Nord Drive Systems reducer, 2 hp drive

Static mixer assembly, all stainless steel mounted on SS stand.

Oystar 6 oz. cup filler, model FP2x6, s/n E16133, 480 vac, 3 ph, 60 hz, largest load amps 24 amp, (installed 2012 with manuals) (2009), (SELLING S...

Osgood Industries 24 oz. cup filler, model 4600, s/n 69-292-B, 220 vac, 3 ph, 30 amp, 60 hz, 5 hp, with (4) heaters & a seal cutter, with manual (...

Mobile COP tank, with Fristam centrifugal pump, model FPX 732-125, serial no. FPX 7320400509, 5 hp. Baldor washdown drive, total dimension 77"L x ...

COP wash table, with fittings

Giant Move stainless steel pallet jack, (2014)

[Lot] Dairy Conveyor Corp. table top conveyors, extending from filling room to checkweigh in tray packing area, approx 180 feet of 3 inch plastic ...

Mettler Toledo checkweigher, model CM9400 XS, s/n 090 54711, high speed with manuals (2009) ...[more]

Domino InkJet printer, model A420i, s/n AST000107244, 100-240 volts, 4 amp, 50-60hz. (2014) ...[more]

Domino InkJet printer, model A420i, s/n AST000107511, 100-240 volts, 4 amp, 50-60hz. (2014) ...[more]

Safeline metal detector, model SI2000, s/n 2977301, 24 oz, aperture 6"W x 6-1/2"H, with auto reject, 110 volts,15 amps, 80 psi, 60hz, with manual....

Delkor spot pack & heat tunnel, model SP 500i, s/n SP-2442, spot pack wiring schematic: 129392, 480 vac, 35 amp, 60 hz, 3 ph, largest motor 2.3 am...

Domino labeler, PCU IV-B4 M series, s/n CC14d0501304, mobile with casters and levelers, 110~240 vac, 50~60hz, 6.3 amps, with manual (2014) ...[m...