Used 70mm Buss kneader model PR70/120. 13/1 L/D, serial #45163C-1, new 1995. Has stainless steel chamber, jacketed chamber for liquid cooling/heat...

Used Cincinatti Milacron reduction gearbox for cm92/90 twin screw Conical, counter rotating twin screw extruder. (LOADING PRICE $60) (Located at ...

Used Cincinatti Milacron reduction gearbox intended for use on cm90/92 Conical counter rotating twin screw extruder.(LOADING PRICE $60) (Located ...

Used 40mm Berstorff model ZE40 35:1 L/D co-rotating twin screw extruder. Electrically heated, air cooed barrel, water cooled feed throat.  Belt dr...

Used 6" Beringer screen changer. Push through breaker plate style but does not include square breaker plates required. No hydraulic pumping system...

Used MAAG "Extrex" gear pump driven by a 30 HP AC motor with inverter control. 230/460 volt AC input. Model Extrex 90/90T. 1400/1800 lbs per hour....

Used 10" Tech Flow rotating blown film die with air ring. Die was new in 9/2000. (LOADING PRICE $150) (Located at BW-33 ) ...[more]

Used 10" Addex rotating blown film die with air ring. (LOADING PRICE $150) (Located at BW-34 ) ...[more]

Used 8" Poly System model #10"SLD rotating blown film die including air ring.(LOADING PRICE $150) (Located at BW-37 )

Used 45" wide Chippewa Valley Die, production components, Masterflex R/200=LD-200-75 sheet extrusion die, JO # 2332-93. (LOADING PRICE $60) (Loca...

Used 52" wide flex lip sheet extrusion die, as spare bottom lip. Die mounted on stand. Has 1" square center back feed. (LOADING PRICE $60) (Locat...

Used 124 hole EDI Strand die. Has replaceable die plate, back center feed, electrically heated body. (LOADING PRICE $60) (Located at BW-61 ) .....

Used 20" wide Cloeren  3-layer manual sheet die. Removeable lower lip. Three oblong entrances located in the back of the die.  Job number 92-991. ...

One used EDI Ultraflow co-extrusion block. Serial number 92-14473. Manufactured in 1992.(LOADING PRICE $60) (Located at BW-64 RACKS 19 )

Used 65" wide Solo 2-sided treater, Model S1008-3UP-65.  Serial #M2013.  Does not include power generator controls or high voltage transformer. Eq...

Used 65"" wide Solo 2-sided treater, Model S1008-3UP-65.  Serial #M2017.  Has (3) 10"" wide treating heads for 3-lane web.   Does not include powe...

Used 65" wide Solo Systems Inc. 2 sided treater, MDL S-608-65, but missing one treater bar. (LOADING PRICE $60) (Located at AY-33U ) ...[more]

Used 48" wide Worldwide 2-position turret winder, new 1990. has Reliance max pack drive control panel and (2) 15 HP DC motors. (LOADING PRICE $15...

Used 62" wide Macro Engineering 3-roll chill roll stack. New 9/2010. Package consists of the following: 62"" wide Macro 3-roll stack with 18"" top...

Used 84" wide Goulding air actuated shear. (LOADING PRICE $150) (Located at BW-33 ) ...[more]

Used 50" wide PTI model SWU "S" wrap pull roll assembly. New 9/2006. Has (2) 24" diameter X 50" wide polyurethane coated pull rolls. Air cylinder ...

Used 61" wide Amplas model 6Z01 post gusseter. Includes  gusset boards, collapsing frame, nip roll assembly.(LOADING PRICE $150) (Located at BW-4...

Used 14" wide PS machinery Duplex slitter/rewinder, serial # 101000.  Includes 20" OD single position unwind with air actuated disc brake. Unwind ...

Used 116" wide Black Clawson film cast embossed station with 24" diameter matte primary casting roll, 12" chrome back up roll, 12" pick off roll, ...

Used 54" Marshall & Williams cast embossed unit having a 30" diameter main roll. Unit includes 12" diameter silicone roll with 6" chrome roll. (LO...

Used Buss approximately 23" wide dual roll cooling roll assembly with approximately 8' stainless steel cooling belt and material chipper. (LOADING...

Used Johnson 54" single turret winder able to handle up to 24" diameter packages.(LOADING PRICE $150) (Located at BW-29 )

Used 70" Lembo driven turret unwind stand for approximately 32" diameter rolls. Unwind stand is mounted on guided base.(LOADING PRICE $150) (Loca...

Used 67" wide Dusenbery model 820 DF salvage rewinder. Includes single position unwind for Fife edge guide, 5 HP DC motor, hydraulic pumping syste...

Used CDS model CST24-90-24SPL auxiliary spray cooling tank with indexing capability for passing lumber under additional cooling nozzles perpendicu...

Used 54" wide Modern Model 1236TP dual fly wheel trim press, serial # M354, new 12/87. Total 23,243 hours usage.  460 volt AC input..   Equipped w...

Used approximately 4" wide X 22" long Boston Marine model C smooth belt puller. Includes 2 HP DC motor.(LOADING PRICE $150) (Located at BW-34 ) ....

Used 3.75" wide X 26" long Farris model PB4 smooth belt puller. Includes 1.5 HP motor.(LOADING PRICE $150) (Located at BW-34 )

Used Metaplast 2-belt puller intended for 3.75" X 25" belts.  No belts included.   Motor not installed.(LOADING PRICE $150) (Located at BW-34 )...

Used Metaplast model PB4-C belt pulller, 3.5" wide X 24" long. (LOADING PRICE $150) (Located at BW-34 ) ...[more]

Used 84" wide Maier hydraulically powered fixed, single shaft winders mounted on portable carts.  Package includes the following: (2) hydraulic po...

Used RDN model 218-3 belt puller. 3" wide X 18" long. 1.5 HP motor.(LOADING PRICE $60) (Located at BW-47 )

Used Metalplast model PB4-C puller. 3.5" wide X 26" long.(LOADING PRICE $60) (Located at BW-47 )

Used Gatto model 207-3PC cleat type puller having 3.5" wide cleats with 30" of contact length. Cleats are driven by a 3 HP DC motor through a 4 sp...

Used 36" wide Sakas traveling cut off saw, model SS36.  Serial #15206.  Includes 36" wide X 48" long belt take-off, operator control panel. (LOADI...

Used CDS dual head Servo driven fly knife cutter, models CSFK2.5D-L and model CSFK 2.5D, serial #110404. 460 volt AC input. New 2004. Will accommo...

Used SSI model 5000-E 2-rotor shredder. 96" X 52" feed opening. (2) 200 HP GE 460 volt motors.  Serial #30732-5000E. (LOADING PRICE $500) (Located...

Used 400 kW Regmac model T 540 film densifier. Densifier includes 5 ton air cooled chiller,  electrical controls, and Regmac auxiliary discharge b...

Used Spadone hydraulic guillotine a 29" wide blade. (LOADING PRICE $150) (Located at AY-33P ) ...[more]

Used Gala model 52BF/S spin dryer. Driven by 3 HP motor, 460 volts 1735 rpm 3 PH 60 HZ. Includes approximately 100 gallons per minute water system...

Used 32" wide Conair model S3032GP pelletizer. Mounted in a sound enclosed cabinet with air cylinder for raising and lowering hood. Pull rolls are...

Used 12" Conair model 112 strand pelletizer with 24 knife solid helical rotor. Dual drive design with separate 7.5HP AC 208-230/460 volt motors fo...

Used 4" wide Automatek model ASG100 strand pelletizer. Has 20-knife Wedgelock style rotor instralled, (2) spare rotors. New 1992.(LOADING PRICE $...

Used Cumberland model #5, 14" X 20" granulator. No hopper included. Has 3-knife open rotor, new 1965.  Serial # 35055-6537.(LOADING PRICE $60) (L...

Used Hydreclaim dual chamber film grinder with approximately 12" X 18" primary feed. Driven by 25 HP motor.(LOADING PRICE $60) (Located at BW-6 ...

Used Cumberland model 1628 pull roll fed granulator having a 12" X 28" throat opening. 3-knife open rotor is belt driven by approximately a 40 HP ...

USED 150 TON PECO . HYDRAULIC ACTION, WITH 13" X 65" TIE BAR CLEARANCE, 25" X 78" OVERALL PLATEN SIZE. INCLUDES HYDRAULIC PUMPING SYSTEM, (LOADING...

Used 4 post die cutting press 44" X 44" tie bars, 42" X 72" platens, 10" stroke, 12" daylight without platens. Daylight with platens 5 1/2". 50 to...

Used 6" X 12" Thropp laboratory 2-roll mill. Table mounted with under mounted motor. 440 volt.(LOADING PRICE $60) (Located at BW-29 )

Used Hydrotrim Laboratory thermoformer, model 1620, with 16" X 20" maximum sheet size.  Has top and bottom ceramic heat, air actuated top and bott...

Used Haake Buchler System 90 torque rheometer, model 80-42-351. No heads included. New 1990.   Equipped with control process unit #S90CPU. (LOADIN...

Used Cincinatti Milacron dehumidifying hopper dryer. Model DD-100, serial #3933a01-87-97.  No hopper included.(LOADING PRICE $60) (Located at BW-...

Used 22 ton Boy Model 22S injection molder with 1 ounce shot size.  New 1993.  Serial #22603.  Equipped with operator control.(LOADING PRICE $150...

Used 30 ton PHI Laboratory hydraulic press.  Has 12" X 12" electrically heated platens, water cooled.  Includes hydraulic pump, 480 volt, (2) Euro...

Used Conair pneumatic conveyor having a 7.5 HP belt drive.  Unit is sound enclosed.  Manufactured approximately 1985.  460/3/60.(LOADING PRICE $6...