EDI 8" Flex Lip Die, Model H40, with auto flex mechanism, 40 MM die gap, removable lower lip, on stand, serial# 94-16233. ...[more]

Air Wipe, 480V, 1.5 hp, 6" wide ...[more]

Air Wipe, 480V, 1.5 hp, 6" wide ...[more]

 Brabender Lab blown film tower / nip roll assembly, with 10" roll face width x 3" diameter rubber top roll x 10.5" roll face width x 3" diameter ...

6" Cumberland Pelletizer, power roll feed, 3 H.P. 575 volt variable speed drive, on base, Serial# 226425-772. ...[more]

(1) Lot of various extruder parts ...[more]

Lot of Extruder Screws ...[more]

 Baker-Perkins Double Arm Mixer, 10 gallon working capacity, carbon steel construction, tangential dispersion blades, jacketed bowl, screw tilt wi...

Lot of various Parts ...[more]

2 hp Hydraulic Power Pack, 460V ...[more]

.75 hp Hydraulic Power Pack, 460 V ...[more]

Hevi-Duty Transformer, 440 KVA, 460 delta high volt, 460Y/266, 552 amps. ...[more]

ACME 330 KVA Drive Isolation Transformer, Primary Volts 460 Delta W/FC Taps, Secondary Volts 460Y/266 330KVA 60 HZ 3 Phase ...[more]

Hevi-Duty 118 kVA General Purpose Power Transformer, 3phase, 60HZ H.V. Line 460 Delta L.V. 460/266   ...[more]

Challenger 63 kVA  Drive Isolation Transformer  460 delta-460y/266 y ...[more]

Hevi-Duty 118 kVA General Purpose PowerTransformer ...[more]

Challenger 63 kVA Transformer ...[more]

Federal Pacific  75 kVA Transformer HV 460 LV 460/266 ...[more]

(1) Lot of Transformers, (5) 11 kVA units, (4) assorted ...[more]

(1) Lot of Small Transformers, including, but not limited to: 1X Hevi--Duty General Purpose Power Transformer, 30 KVA HV 415 Delta LV 240y/139 2X ...

Lot of (7) transformers, Lot includes but not limited to: 1X Hevi-Duty General Purpose Power Transformer 112KVA 415/240 1X Acme Constant Voltage R...

330 kVA Acme Drive Isolation Transformer Primary Voltage 460 delta Secondary Volts 460y/266    ...[more]

 Hydracolor Volumetric Blender/Feeder, Model MM-300-3, carbon steel construction, 3 material design, with drives and controls, 10'6" overall heigh...

Model FW-340 Formost Horizontal Form/Fill/Seal Wrapper, rated 50-250 per minute, 3" to 12.5" long x 2" to 4.75" wide x .375" to 2.5" high package ...

Conair Dehumidifying Hopper Dryer, Model CD200 H4000302, rated approx. 130 CFM,  480 Volt with 36" diameter X 58" straight side cone bottom hopper...

92 mm Maris pelletizing line consisting of the following, One (1) 92 mm Maris twin screw co rotating extruder, type TM92M, 30:1 l/d, electrically ...

3.5" Davis-Standard Extruder, Model 35IU35-30DSPW, 30:1 L/D, electrically heated, water cooled, jacketed feed section, 17.4:1 gear box ratio, belt...

102" Embossing stand, 16" diameter x 102" wide chormed embossing roll, cored with rotary unit, 16" diameter x 102" long rubber bottom roll with st...

Battenfeld caterpiller dual belt puller saw combination, model DESC 125R, 5" wide x 70" long contact dual belt puller section, with saw attachment...

Thyssen Krupp Nothelfer automatic solvent weld socketing machine, model KK 160 A/2, left side movement discharge, with PCS 095 Topline mini contro...

Model S45 Foremost Granulator, 16" x 45" feed opening, 3 knife closed rotor, 2 bed knives, feed hopper with dual 50 H.P. 230/460 volt motors, No b...

2 hp Hydraulic Power Pack, 460V ...[more]

 Davis-Standard Gemini conical twin screw extruder, model GC8HD, 130/61 mm conical screws, counter rotating, electrically heated, air cooled barre...

 Lycro Products semi automatic pipe socket forming machine, designed to handle 8" - 15" diameter pipe, hydraulically actuated tooling, 480 volt. *...

 Thyssen Krupp Nothelfer automatic solvent weld socketing machine, model KK 160 A/2, left side movement discharge, with PCS 095 Topline mini contr...

100 MM Baker Perkins twin screw compounding extruder, Model MP-100MM-DE-XLT, 100MM/68.5MM tapered screws, co-rotating, electrically heated, water ...

10" EDI flex lip sheet die, bottom center feed, flexible upper lip, job# JO 07105 01, serial# 449512 02 ...[more]

Battenfeld planetary saw, model STU 250 E, range from 40 mm to 250 mm diameter pipe, approximately 8" diameter blade, pipe clamps, with Battenfeld...

Una Dyn Hopper Dryer with Heat and Blower, 200# Hopper with receiver. **Rigging Fee $50.00** ...[more]

Una Dyn Hopper Dryer with Heater and Blower, 200# Hopper with receiver. **Rigging Fee $50.00** ...[more]

Una Dyn Hopper Dryer with Heater and Blower, 200# Hopper with receiver. ...[more]

2.5" Davis Sterling extruder, 30:1 L/D, electrically heated, air cooled, 5 barrel zones, 50 HP DC motor with SCR, with Una-Dyn hopper dryer/ loade...

 54" EDI flex lip sheet die, Type Ultraflex 40, flexable upper lip, 5 zone, back center feed, serial# 82-7448. ...[more]

 75 MM Munchy Reprocessing Extruder, Model Munchy 75MM, 75 MM conical screw, 12:1 L/D electrically heated, air cooled, 25" long tapered barrel, .5...

Gatto puller, model 203 3/26, 24" long x 2.75" wide smooth belts, manual gap adjustment, 2 hp dc motor, 440 volt, serial# 8711179. ...[more]

16" Pipe saw mounted on a pneumatically operated clamp table, 18" of table travel. ...[more]

Unused Moldow Fan, 40 hp, rated 7000 cu meters/hour ...[more]

Lot of (2) 40 hp Baldor motors, 460 volt, 3 phase, 3530 rpm ...[more]

Conair stand pelletizer, model 3508, 8" wide helical rotor, pull roll assembly with rubber pull roll, 15 hp, 230 volt motor, serial# 12-080283. **...

 Novtec dual desiccant hopper dryer, model MPC-1500 with dual desiccant beds, capacity up to 1500 CFM, electrically heated, with dual fines collec...

 Gatto vacuum tank, model DPC105.6.1, stainless steel construction, approximately 12" x 12" x 72" long chamber, unit converted to vacuum table wit...

Gatto vacuum tank, model DPC105.6.1, stainless steel construction, approximately 12" x 12" x 72" long chamber, single compartment with liquid ring...

Lorik puller, 3" wide x 12" long belts, smooth belts on base with 1.1 KW Servo motor. ...[more]

Gatto Model UC-7-24 saw, 480 volt, serial# 9214195 ...[more]

Cutting Mill, 1.5 kW ...[more]

9 KW Sterlco temperature controller, type Sterltronic model M29412-AC, single zone, 230 volts, 3 phase with controls, serial# 95M5266. ...[more]

 Novatech hopper dryer system, model POD-250-B, rated 250 CFM, with blower, controls, 230 volt, with ten (10) Novatech hopper receivers model PEE-...

Bobor travelling saw, model MDHD 15-8, 3 hp, 575 volt, serial# S2M9, new 1996. ...[more]

Bobor travelling saw, model MDHD 15-8, 3 hp, 575 volt, serial# S2M10, new 1996. ...[more]

RDN cross cut travellilng saw, model C-430A, up to 6" high x 20" wide tubing size, up to 4" high x 30" wide profile size, approximately 18" table ...