PROCESSING AND MANUFACTURING EQUIPMENT FROM A GLOBAL LEADER IN CHEMICAL MANUFACTURING

Refine your search

You’re currently pending approval by the auctioneer. In the meantime you can continue to place bids from the lot page which will be accepted once you’re approved.
There are 98 item(s) within this sale
  • List
  • Grid
  • Lots per page
  • 60
  • 120
  • 240
Page of 2

This auctioneer has chosen to not publish their results. Please contact them directly for any inquiries.

Elta Fans Ventilation Fans. Model: LCC71P3-A3/16/B. Serial number: 136019. Supply 440-3-60. RPM 3450, 12.5 KW

Adjustax Size 25A5 with direct dive air-over motor. Housing is 35.5"L, includes inlet bell. 15000 cfm, interter duty, TEFC air over, frame size 28...

Fisons Instruments spectrometer, model 3410 + ICP, with Nebulizer, model Tk-30-K3, 220 volt, serial# 45645, Fisons serial# 1459. ...[more]

Allegheny cross cut paper shredder, model 20-300, 20" wide cutting head, 15 hp, 460 volt motor with 20" wide feed belt, 20" wide inclined discharg...

 Chemineer agitator, model 2 HTA-2, 2 hp, 230/460 volt, 1140 rpm motor, packing gland seal, 37 RPM output, with 2.5" diameter x 15'6" long stainle...

2.5 Ton Detroit Crane Hoist, with 1 hp, 230/460 volt motor, rail wheels, with cable and and hook, serial# 160183.

 Blue M oven, model OV-490A-2, single door, 38 - 260 C temperature range, approximatley 19" x 18" x 15" deep chamber, 1600 watt heater, 120 volt, ...

Fisher Scientific oven, model 630F, single door, 115 volt, serial# 13-245-630F.

3" Acrison feeder, model FHM0226-8008035, stainless steel construction, 3" diameter x 21" long screw with dual conditioning screws, .75 hp, 230/46...

Dionex ICS-3000 Ion Detector/Chromatography Module. DC-1   Link to Manufacturers manual.  (may not represent fully item in this lot) ...[more]

Chemineer agitator, model 2 HTA-2, 2 hp drive, 230/460 volt, mechanical seal, 37 RPM output, with two-tier shaft and (6) blades

Enpro Deaerator Deoxygenator, type VT with storage, carbon steel construction, rated 40,000#/hour capacity, vessel rated 75 psi and full vacuum at...

Gyrol Fluid Drive gearbox, dual rotation, 250 max hp, 1800 max rpm, serial# 73-171-2BF12.

100 horsepower US Electrical Motors model R924A motor. 1780 RPM, 480V/3Ph, Frame 405T, Serial #B11-R924A-H

(1) used lot of (4) 120 gallon, (2) 60 gallon & (1) 20 gallon Polypropylene tanks, open top, slight cone bottom on carbon steel stands.

3000 gallon 316 Stainless steel receiver tank, approximately 72" diameter x 14' straight side, semi elliptical top and bottom, (5)2" top nozzles, ...

500 gallon tank, 304 stainless steel construction, 48" diameter x 55" straight side, dish top and bottom, with top entering 3 hp Chemineer agitato...

462 sq. ft. Doyle & Roth shell and tube heat exchanger, 304L stainless steel shell, tubes, tube sheets and bonnets, (134) 1" diameter x 158" long ...

Hydrovane rotary compressor, model 715-C08-200, rated approximately 75 cfm at 9 bar, 15 kw, 460 volt motor with integrally mounted air and oil coo...

 Lightnin agitator, model 72C2, 2 hp drive, 230/460 volt, mechanical seal, 32:1 gearbox ratio with 36 RPM output, with two-tier shaft and (6) blad...

Franklin Miller inline pipeline delumper, model PD6, hastelloy C276 construction, 6" diameter inlet/outlet, driven by 10 hp, 230/460 volt xp motor.

Pulva Hammer Mil, Model 50, stainless steel construction, twin screw feeder driven by .75 hp motor, approximately 50 hp main drive, with feed hopp...

24" Kason screen, model K-24-3-SS, stainless steel construction, single deck design , on base with 1/3 hp 115 volt motor, serial# KCN-1152.

36 sq ft Doyle & Roth shell and tube heat exchanger, 304L stainless steel shell, tubes, tube sheets and bonnets, with (12) 1" diameter x 138" long...

 Lakos separator, model AX-0409-B, 90 degree vertical design, rated up to 550 GPM, 4" inlet/outlet, 150 psi, serial# 12472-003.

15' Ardeth Engineering column, model D-321, stainless steel construction, approximately 12" diameter x 15' straight side, dish top and bottom, rat...

Lightnin agitator, model 72C2, 2 hp drive, 230/460 volt, mechanical seal, 32:1 gearbox ratio with 36 RPM output, with two-tier shaft and (6) blad...

1,000 gallon Whiting Metals kettle, 304 stainless steel construction, dish top and bottom, 64" diameter x 64" straight side, jacketed for 64 psi @...

2000 gallon Pfaudler glass lined reactor, rated 100 psi at 450 f internal, jacketed for 90 psi at 350 f, with 5SRW agitator drive, driven by 15 hp...

 513 sq. ft. ITT shell and tube heat exchanger, carbon steel shell, stainless steel tubes, rated 150 psi @ 250 degrees F shell and tube sides, Nat...

Carrier Ampli-Flow vibrating feeder, model FC-36100S, approximately 36" wide x 100" overall length, with 72" long screening area, single deck desi...

Vac-U-Max loader conveyor, stainless steel construction, with feed bin, approximately 28" diameter, 3 cu ft working capacity with bottom magnet, 2...

 FIX Peter Steimel GmBH super sack/gaylord loading station, type BIG-BAG/OKTABINBEFULLSTATION, designed to handle both super sack bags on skids an...

Greerco colloid mill, model W250VB, stainless steel construction, vertical orientation, rated up to 25 gpm, jacketed grinding chamber, feed hopper...

Fast And Fluid Management color coating dispenser, model PD500, 10 canister setup, 100/240 volt 50/60 hz, serial# 99965-10034831, built 2008.

Durco centrifugal pump, stainless steel construction, 2" x 1" x 10" impeller, on base with 10 hp, 230/460 volt xp motor.

Tri-Clover centrifugal pump, model SP216MY-S, stainless steel construction, 2" x 1.5" on base with 20 HP 230/460 volt 60 Hz motor, serial# 333307-...

 Duriron pressure leaf filter, model 24HC21, 316L stainless steel construction on product contact surfaces, 21 sq ft surface area, 24" diameter sh...

56 sq. ft. ITT heat exchanger, carbon steel construction, rated 150 psi and full vacuum @ 375 degrees F shell side, jacketed for 150 psi @ 375 deg...

5000 gallon jacketed tank, 304 stainless steel construction, 9' diameter x 128" straight side, dished ends, dimple jacketed on straight side and b...

Busch Cobra vacuum pump system consisting of, One (1) used Busch Cobra vacuum pump, model NC0100BMZ3ZZZC, carbon steel construction, nominally rat...

IKA dispax reactor, type DR3-6A, stainless steel construction, 7.5 hp, 230/460 volt xp motor, serial# 0649.

Vac-U-Max loader conveyor, stainless steel construction, with feed bin, approximately 28" diameter, 3 cu ft working capacity with bottom magnet, 2...

FIX Peter Steimel GmBH super sack/gaylord loading station, type 1200/1/1-E, designed to handle both super sack bags on skids and gaylord boxes on ...

 Fast And Fluid Management color coating dispenser, model PD500, 10 canister setup, 100/240 volt 50/60 hz, serial# 99965-825710, built 2008.

Chemineer agitator, model 26TD-2, 2 hp 230/460 volt motor, with 2.5" x 182" long stainless steel shaft with 2 tier 3 blade turbine style agitator.

16' Whiting Metals stripping column, 304L stainless steel construction, approximately 14" diameter x 16' straight side, dish top and bottom, with ...

 86.5 sq. ft. ITT heat exchanger, carbon steel construction, rated 150 psi / full vacuum @ 375 degrees F shell side, jacketed for 150 psi @ 375 de...

100 gallon Tolan reactor body, 304 stainless steel construction, approximately 24" diameter x 48" straight side, dish top and bottom, rated 140 ps...

2500 gallon Pfaudler glass lined vertical Chemstore tank, approximately 6' diameter x 9'6" straight side, semi elliptical top and bottom, rated 30...

Thermo Line tube furnace, type 21100, approximately 2" diameter x 12" long furnace section, up to 1200 c temp range, 120 volt.

BIO RAD FTS60A/ 896 Spectrometer, BIO RAD UMA500 Microscope and DIGILAB FTIR Spectrometer model 099-1397-5, serial 0991397072-15 ...[more]

Chemineer agitator, model 26TD-2, 2 hp 230/460 volt motor, with 2.5" x 182" long stainless steel shaft with 2 tier 3 blade turbine style agitator.

2000 gallon Pfaudler glass lined reactor, with 5RW agitator drive, driven by 15 hp, 460 volt xp motor with mechanical seal, three blade retreat cu...

 1000 gallon Enerfab glass lined receiver, 66" diameter x 72" straight side, semi elliptical top and bottom, rated 75 psi and full vacuum at 450 f...

Chemineer agitator, model 26TD-2, 2 hp 230/460 volt motor, with 2.5" x 182" long stainless steel shaft with 2 tier 3 blade turbine style agitator.

 Chemineer agitator, model 2HTA, 1.5 hp, 230/460 volt motor, mechanical seal, with 2" diameter x 76" long stainless steel shaft with turbine agita...

Loading...Loading...
  • Lots per page
  • 60
  • 120
  • 240
Page of 2

Recently Viewed Lots