HYUNDAI KIA MODEL KV45 CNC VERTICAL MACHINING CENTERS, TRAVELS: X-31.5”, Y-19.7”, Z-19.7” 45” X 18” SLOTTED TABLE, 30-POSITION AUTOMATIC TOOL CHAN...

HYUNDAI KIA MODEL KV45 CNC VERTICAL MACHINING CENTER, TRAVELS: X-31.5”, Y-19.7”, Z-19.7” 45” X 18” SLOTTED TABLE, 30-POSITION AUTOMATIC TOOL CHANG...

FARO PLATINUM ARM SINGLE POINT COORDINATE MEASURING MACHINE, WITH CASE, WI-FI CAPABILITY, S/N: P08-02-06-04490 (2013) (LOCATED IN BEDFORD, PA)   ...

BROWN & SHARPE “MINSTRAL” 7-10-5 COORDINATE MEASURING MACHINE WITH 6-POSITION PROBE CHANGER, 61” X 35” GRANITE SURFACE PLATE, S/N: 0802-9513 (2002...

GARDNER DENVER MODEL FPF99K32 30-HP ROTARY SCREW TYPE AIR COMPRESSOR, S/N: S037979 (LOCATED IN BEDFORD, PA)   ...[more]

PORTABLE SHOP A-FRAME WITH (3) CM 600 LBS PNEUMATIC HOISTS (LOCATED IN BEDFORD, PA)   ...[more]

LVD MODEL HELIUS 2513 2,000-WATT CNC LASER, WITH 52” X 110” CUTTING BED, SHUTTLE TABLE, APPROXIMATELY 50” X 100” CUTTING CAPACITY, GE FANUC SERIES...

MINSTER MODEL PM3-75-24787 75-TON HIGH SPEED PRESS, 42” X 26” BED, 0-800 SPM, 28.62” SHUT HEIGHT, 1.25” STROKE, 2” ADJUSTMENT, VARI-SPEED, WINTRIS...

MINSTER MODEL P2-60-36 60-TON HIGH SPEED PRESS, 1.5” STROKE, 3” ADJUSTMENT, 17.5” SHUT HEIGHT, 36” X 25” BED, VAMCO TS6 ROLL FEED, 0-450 SPM, CONT...

GASABARRE MODEL VGS 30-TON HIGH SPEED PRESS, WITH 100-1200 SPM, VARI-SPEED, 28” X 36” BED AREA, VARIAX V76 FEEDER, CONTINUOUS / SINGLE STROKE, DUA...

MINSTER MODEL P2-30-24 “PIECE-MAKER” HIGH SPEED PRESS, WITH 1.25” STROKE, 12.25” SHUT HEIGHT, 24” X 19” BED AREA, 0-600 SPM, S/N: P2-22380 (LOCATE...

MINSTER MODEL P2-30-24 “PIECE-MAKER” HIGH SPEED PRESS, WITH 1.25” STROKE, 12.25” SHUT HEIGHT, 24” X 19” BED AREA, 0-600 SPM, S/N: 31860105 (Locate...

4-STAND BENCH TYPE ROLL FORMER (LOCATED IN CAMDEN, NJ)   ...[more]

14 GA X 8’ GATTI MODEL S2550 POWER SHEAR, THROAT GAP 7-7/8”, SPEED 50 SPM, COMPLETE WITH FRONT MANUAL BACK GAUGE WITH LINEAR SCALE, (3) FRONT SUPP...

GEKA MODEL HYDRACROP 100SD – DEEP THROAT, 110-TON CAPACITY HYDRAULIC IRON WORKER, 110-TON PUNCHING CAPACITY (1-1/4” ROUND THRU 1” MILD), 24” THROA...

SUNNEN MODEL MBB-1600 HORIZONTAL HONE, .060” – 6.500” ID RANGE, 16” LENGTH (DEPENDING ON BORE DIAMETER), SPINDLE SPEEDS 200-1,600 RPM, SPINDLE MOT...

ASSORTED PUNCHES & DIES INCLUDING ROPER WHITENY STYLE LARGE PRESS TOOLING, MISCELLANEOUS ROUNDS, OVALS, RECTANGLES, AND SQUARES, THE MAJORITY ARE ...

LANDA MODEL VHG4-3000 HOT WATER TYPE PRESSURE WASHER, 3.9 GPM, 3,000 PSI, 8.2 HP, BELT DRIVEN PUMP, NATURAL GAS OR LPG FIRED, 220V/3PH/60HZ (LOCAT...

HANKINSON MODEL PR35 REFRIGERATED COMPRESSED AIR DRYER, 35 SCFM @ 100 PSI, 115-V / 1PH (LOCATED IN RONKONKOMA, NY)   ...[more]

TROYKE MODEL NC9-B 4TH AXIS ROTARY TABLE (LOCATED IN RONKONKOMA, NY)   ...[more]

WUXI YEXIN MACHINERY COMPANY MODEL ST-29M 30’ PLATE BEVELING MACHINE, APPROXIMATE 2-5/8” PLATE THICKNESS, VFD DRIVE, (24) HYDRAULIC HOLDOWNS CONTR...

INDUSTRIAL OPEN FACE BOOTH MODEL IB1487, 14” X 7’ DEEP X 8’ HIGH INSIDE DIMENSIONS, 15’ WIDE X 10’ DEEP X 8’6” HIGH OUTSIDE DIMENSIONS, CO...

BRANER SLITTER HEAD AND BASE ARBOR -FACE WIDTH 36"  -DIAMETER 5", KNIFE DIAMETER 10 1/2" - 11" DRIVE MOTOR 10/15 HP 400/1600 RPM DC, UNIT IS COMPL...

14 INCH RUESCH RING SLITTER N 2683  6002 MODEL 149, GAUGE RANGE 005-063, (ALUMINUM/STEEL/BRASS/COPPER/STAINLESS/INCONEL/GOLD), MINIMUM WIDTH 1/4 W...

DOWNLAYER & PACKAGING LINE FOR SLITTING LINE 5000 LB CAPACITY, LOCATED IN BROOKLYN, NY

72 X 20000 LB SLITTING LINE SLITS 016-187 THICK MATERIAL AND WIDTHS FROM 3/4 WIDE AND UP UNCOILER BRADBURY 72 WIDE X 20000 LB UNCOILER WITH COIL C...

STANAT SLITTING LINE 30" X 5'', STANAT  SLITTER, 25 HP, PAYOFF, COIL CAR  SCRAP WINDER, RECOILER 1 ARM TURNSTYLE SLITTER HEAD CLOSES TO 12 WIDE F...

WYSONG MODEL 630RKB 0.312" X 6' HI-SPEED SHEAR, 0.312" MILD STEEL, 0.210" STAINLESS STEEL, 72" WIDE, 60 STROKES PER MINUTE, 20 CUTS PER MINUTE, BO...

AUTOLIFT MODEL D5-300-OC FORKLIFT 30,000 LBS CAPACITY FORKLIFT WITH ROTATING FORKS (BRUDI ROTATOR) 7047 HOURS, DIESEL ENGINE, FRONT TIRES ARE 28 X...

SILENT HOIST "RIGGERS SPECIAL" MODEL FLS20 FORKLIFT TRUCK, 40,000 LBS CAPACITY, TOTAL WEIGHT: 62,000 LBS, LIFT:56" CAN BE MODIFIED TO 61", FREE LI...

7 INCH EDGER (LOCATED IN BROOKLYN, NY) ...[more]

18 TORRINGTON SLITTER HEAD 2 5/8 ARBORS (LOCATED IN BROOKLYN, NY) ...[more]

RED BUD 18 INCH STRAIGHTNER 020-125 CAPACITY (LOCATED IN BROOKLYN, NY) ...[more]

24 INCH STANAT SLITTING LINE 3 ARBORS 5000 LB COILS 6 ID 8 ID 12 ID 16 ID 20 ID  (LOCATED IN FLORIDA) ...[more]

GARY MODEL 4910 SP 48 48" WIDE RECOILER 10,000 LB CAPACITY, WITH 40-HP HYDRAULIC EXPANSION 20 ID DRUM PURSH OFF, S/N: 251 (LOCATED IN BROOKLYN, NY...

48 INCH STAMCO UNCOILER 15000 LB CAPACITY 20 -24 ID HYD EXPANSION SLIDING BASE FEED UP MOTOR (LOCATED IN BROOKLYN) ...[more]

72 INCH DRAG BOARD TENSION STAND (LOCATED IN BROOKLYN) ...[more]

COIL UPENDER COIL CART COMBINATION BRANER 48 X 20000 LB CAPACITY (LOCATED IN BROOKLYN, NY) ...[more]

COIL TRANSFER CAR COILTECH 36 WIDE 20000 LB CAPACITY (LOCATED IN BROOKLYN, NY) ...[more]

COIL CAR 30000 LB CAP 32 BED (LOCATED IN BROOKLYN, NY) ...[more]

COIL CAR 20000 LB CAP 36 BED WAS USED ON A 72 WIDE INSPECTION LINE (LOCATED IN BROOKLYN, NY) ...[more]

COIL CAR BRANER 48 X 20000 LB CAPACITY (LOCATED IN BROOKLYN, NY) ...[more]

SCRAP WINDER IOWA PRECISION (LOCATED IN BROOKLYN, NY)  ...[more]

SCRAP WINDER GARY (LOCATED IN BROOKLYN, NY)  ...[more]

SCRAP WINDER DUAL REELS NEED SOME WORK BEARING BLOCK NEEDS SOME BOLTS /CHAINS/1 HYD MOTOR ALL HYRAULIC (LOCATED IN BROOKLYN, NY)  ...[more]

SCRAP WINDER (LOCATED IN BROOKLYN, NY)  ...[more]

HAAS VF-2 CNC VERTICAL MACHINING CENTER, WITH 30" X 16" X 20" TRAVELS, 40-TAPER SPINDLE, 3-AXIS, PRE WIRED FOR 4TH AXIS, 20-POSITION AUTOMATIC TOO...

DAEWOO PUMA MODEL 8-S CNC LATHE, 14.6" MAXIMUM TURNING, 20.7" CC, 19.7" SWING OVER BED, A2-6 SPINDLE NOSE, 12-STATION TURRET, TAILSTOCK, FANUC O-T...