Refine your search
- List
- Grid
-
125 item(s)/page
This auctioneer has chosen to not publish their results. Please contact them directly for any inquiries.
16 quart V-Blender
16 quart v-blender, PK, plastic, with bar, no. C023360, max density 125lb/ft3, on wheels Rigging and loading fee of $50 USD will be added to final...
18 inch Sweco Vibro energy grinding mill, model M18L, Serial 18M-566-46, phenolic lined, with cover, 1/4 hp Rigging and loading fee of $50 USD wi...
18 inch Sweco Vibro energy grinding mill with charge, rubber lined, model GM18L-002, serial GM181290650, w/o cover Rigging and loading fee of $50...
18 inch Sweco Screen
18 inch Sweco screen, two deck, stainless steel, on wheels, with Accurate feeder, serial 600-89-2833, w/o cover Rigging and loading fee of $50 US...
18 inch Sweco Screen
18 inch Sweco screen, 2 deck, stainless steel, model LS18 555, serial LS18-777-29, 1/4 hp, 440Volt, w/o cover Rigging and loading fee of $50 USD ...
30 inch/800 mm filter press, 37 chambers, polypro, hydraulic closure, 4 eye Rigging and loading fee of $250 USD will be added to final invoice ....
4 inch micropulverizer, stainless steel with screw feeder, 5 hp, Type 1S1, serial 65J1352, 9750 rpm Rigging and loading fee of $50 USD will be ad...
1x3 ft rotary vacuum filter, stainless steel, Filtration Engineer, string discharge, vari-speed drive, with control panel, serial no. A-21397-C R...
18 inch Sweco Screen
18 inch Sweco Screen, Stainless Steel, 2 deck, with cover, model LS18S33, serial no LS18-1085-52, 1/4 hp, 1200 rpm, on stand Rigging and loading ...
0.5 Cubic Foot (16 Quart) Stainless Steel Mobile V-Blender, Includes bar, Driven by a 1/3 hp motor Mounted on wheels Rigging and loading fee of $...
5 ft3 V-blender, Solids Processor, stainless steel, jacketed, with bar, Paterson-Kelly, national board no 15743, density 100 lb/ft3, serial no. 17...
Furnace, continuous pusher, Pilot size, American Electric Furnace, 80 KW, 1200 amps, serial no 9970, 3/60/480V, takes 6 inch wide boats Contact a...
18 inch Sweco Screen
18 inch Sweco Screen, 3 deck, stainless steel, LS18S33, serial no 702024-28698, w/o cover Rigging and loading fee of $100 USD will be added to fi...
Eimco Belt Filter, working approx. 12 inch x 12 ft, rubber belt, plastic lined trough, serial no 64136-01-AR, with Nash SC3/5 vac. pump Rigging a...
Bethlehem Corp. indirect fired rotary calciner, 24 inch x 15 ft, alloy tube, screw feed, 3 zones, 6 gas fired burners, 1200 deg. C, 15 ft furnace ...
800 mm filter press
800 mm filter press, polypro plates, 5 eye, 33 plates, hydraulic closure Rigging and loading fee of $250 USD will be added to final invoice ...[...
75 ft3 V-blender, Paterson Kelly, stainless steel, 48 inch vessel diameter, approx 10 hp, serial 770076, cust. No. TT25169 Rigging and loading fe...
N12 Wyssmont Turbo Dryer, 304 stainless steel, 12 shelves, approx. 7 ft shelf diameter, approx. 9.5 ft diameter, with blower and heater, serial no...
Twin shaft vacuum dryer, 67ft3, Paul Abbe #9, twin shaft, 316 stainless steel, jacketed, FV@325F internal, 80 psig@325F in jacket, NB no 494, with...
800 mm filter press, Watermark, 31 plates, 5 eye, hydraulic closure, model FP800G45-100-21A, serial FP00374, year 2012 Rigging and loading fee of...
Ross mixer, model LDM-2
Ross mixer, double planetary, stainless steel, on stand, 1 hp, model LDM-2, serial no. 76273 Rigging and loading fee of $100 USD will be added to...
4 inch Mikro Pulverizer, model 1SH, stainless steel with screw feeder, 5 hp, max rpm 14,000, mobile stand, serial 68JQ42 Rigging and loading fee ...
Stokes granulator, model 43A
Stokes granulator, model 43A, stainless steel, 6 bar rotor, 12 inch long, 3hp Rigging and loading fee of $100 USD will be added to final invoice ...
4 inch micropulverizer, stainless steel with screw feeder, 5 hp, screw 1/3 hp. Rigging and loading fee of $100 USD will be added to final invoice...
Dyno Mill, model KD20B
16.6 liter Dyno mill, Type KD20B, stainless steel, 25hp, Nr. 981119, water cooled, 1998 Rigging and loading fee of $150 USD will be added to fina...
UNUSED 2000 gallon glass lined reactor, built by Zibo Taiji Industrial, NB? Number 88, internal 100psi/FV @ 450F, jkt 90 psi @ 450F, set up for le...
24 inch filter press
24 inch filter press, Watermark, 30 polypro plates, plate 2.4 inches thick, 5 eye, hydraulic closure, model FP630G38L-29-10AXX, serial FP000525, b...
30 inch Sweco screener
30 inch Sweco Screener, stainless steel, 2 deck, with cover, 1/2 hp, model ZS30S66, serial no. 82271-0-129 Rigging and loading fee of $100 USD wi...
30 inch Sweco screener
30 inch Sweco Screener, stainless steel, 2 deck, w/o cover, model XS30S, serial 00021-A-292 Rigging and loading fee of $100 USD will be added to ...
30 inch Sweco screener
30 inch Sweco Screener, stainless steel, 2 deck, with cover, 2.5 hp, model no. US30S66HS-001, serial no. US3019190 Rigging and loading fee of $10...
75 ft3 V-blender
75 ft3 V-blender, stainless steel, 48 inch vessel diameter, gear drive, 7.5hp Rigging and loading fee of $500 USD will be added to final invoice ...
18 inch Sweco Vibro energy mill, with charge, w/o cover, phenolic lining, model M-M8-5, serial 18M-1272-11 Rigging and loading fee of $100 USD wi...
18 inch Sweco Vibro energy mill, phenolic lined, w/o cover, serial GM18L-008 Rigging and loading fee of $100 USD will be added to final invoice ...
18 inch Sweco Screen
18 inch Sweco Screen, stainless steel, double deck with cover Rigging and loading fee of $100 USD will be added to final invoice ...[more]
18 inch Sweco Screen
18 inch Sweco Screen, stainless steel, single deck with cover, model LS18S33HS, serial AL19113C Rigging and loading fee of $100 USD will be added...
48 inch Sweco Vibro Energy Mill, with cover and charge, model GM45L-001, serial GM451290660 Rigging and loading fee of $150 USD will be added to ...
Abbot Furnace, Model 3ZSCR-14-144HH3-1850, 14 inch wide belt, alloy belt, Type - Annealing, serial no. AB673-2188-GTPC-1110. 111 KW, 3/60/480 Volt...
40 ft3 Paterson Kelly V-Blender, stainless steel, with bar, 65lbs/ft3, 50 HP, serial C421037 Rigging and loading fee of $300 USD will be added...
approx. 100 gallon glass lined reactor, Zibo Taiji, clamp top, 150&FV internal @ 450F, 125psi in jkt @ 450F, NB no 47, mechanical seal, serial no....
approx. 100 gallon glass lined reactor, Zibo Taiji, clamp top, 150&FV internal @ 450F, 125psi in jkt @ 450F, 3 blade retreat curve reactor, finger...
18 inch filter press
18 inch filter press, polypro, 19 plates by EMP, 2.25 inch thick, 4 eye, hydraulic closure Rigging and loading fee of $150 USD will be added to f...
18 inch filter press
18 inch filter press, polypro, 19 plates by EMP, 2.25 inch thick, 4 eye, hydraulic closure Rigging and loading fee of $150 USD will be added to f...
Pusher Furnace
Furnace, continuous pusher with return loop, approx. 8" x 20 ft, 7 zone, electric heating, H2 purge, Rigging and loading fee of $4200 will be add...
18 inch Sweco screener
18 inch Sweco screener, stainless steel, double deck, with cover, model LS18S33, serial 30238-A-192 Rigging and loading fee of $100 USD will be a...
10 ft3 Paterson Kelly V-blender, stainless steel, with bar, 90 lb/ft3, 24 inch vessel diameter, 7.5 hp, serial 252645 Rigging and loading fee of ...
CI Hays furnace pusher furnace with return loop, approx 12 inch wide Contact auctions@usedplants.com for rigging and loading ...[more]
36 inch Sweco Vibro mill
36 inch Sweco Vibro mill, stainless steel cover, with charge, 2. Hp, Model DM-O4L, serial 67157-A-594 Rigging and loading fee of $150 USD will be...
BTU Furnace, Pusher Type
BTU Furnace, pusher type, approx 13 inch ID x 20 ft long Contact auctions@usedplants.com for rigging and loading ...[more]
Koppers Mill model 9x18
Koppers Mill, Model 9x18, 2 sets of rolls, with vibratory feeder, 10 hp serial no 79-2231 Rigging and loading fee of $150 USD will be added to fi...
Koppers Mill model 9x18
Koppers Mill, Model 9x18,, 2 sets of rolls, w/o motor, serial 79-2230 Rigging and loading fee of $150 USD will be added to final invoice ...[mor...
60 ft3 Double Cone Blender
60 ft3 Double Cone Blender, stainless steel, Paul Abbe, 6 ft diameter, gear drive, approx. 15 hp, 18600 A4875, with base Rigging and loading fee ...
Lindbergh belt furnace
Lindbergh belt furnace. 10 inch wide belt by 20 ft long, 6 zone Contact auctions@usedplants.com for rigging and loading ...[more]
Lindbergh belt furnace
Lindbergh belt furnace. 12 inch wide belt by 15 ft long, 3 zone Contact auctions@usedplants.com for rigging and loading ...[more]
48 inch Sweco Vibro Energy Mill, with stainless steel cover, 2.5 hp, 1145 rpm, model M45L, serial 45M-666-40 Rigging and loading fee of $250 USD ...
48 inch Sweco Vibro Energy Mill with stainless steel cover, 5hp, 1200 rpm, Model M45L, serail 45M1278-18 Rigging and loading fee of $250 USD will...
48 inch Sweco Vibro Energy Mill, w stainless steel cover, 5 hp, 1160rpm, model GM45L, serial 692935-A698 Rigging and loading fee of $250 USD will...
24 inch Duriron filter press
24 inch Duriron filter press, 15 plates, polypro, 5 eye, hydraulic closure, S.O. no. D-00547 Rigging and loading fee of $150 USD will be added to...
24 inch Duriron filter press
24 inch Duriron filter press, 11 plates, polypro, 5 eye, hydraulic closure, S.O. no D-00312 Rigging and loading fee of $150 USD will be added to ...
75 ft3 Paterson Kelly V-blender, stainless steel, with bar, 55 lb/ft3, approx. 50 hp, bar 7.5hp, serial 271239 Rigging and loading fee of $500 US...
Sweco DM-3, 3 Cu. Ft. Vibro-energy High Amplitude Grinding Mill with cover, model DM-3, no. 74528, serial no. 3DM-571-1, 1.25 hp, 30 inch diameter...
-
125 item(s)/page