CNC Machining, Laser Fabrication
No Image
Auction closed
Timed auction

Auction dates

  • Ended Oct 09, 2019 2:14pm CT (8:14pm BST)

Auction details

Currency: USD
Buyer's premium: 15.00%

Venue address

3601 Morton Drive East Moline, Illinois 61244 United States

Auction house

Add to favorites Ask a question phone_in_talk 319-266-3578
You’re currently pending approval by the auctioneer. In the meantime you can continue to place bids from the lot page which will be accepted once you’re approved.
311 item(s)
  • List
  • Grid
  • 311 item(s)
    /page

This auctioneer has chosen to not publish their results. Please contact them directly for any inquiries.

Perishable tooling, quantity of various mill cutters, various sizes, various types, and various conditions. ...[more]

Quantity of assorted mill cutters, various types sizes and conditions.

Peerless Horizontal bandsaw model HB916U, serial number 101, date BB, 2 hp motor, 220 V, three phase, wet type, 1 inch blade, manual vise, 9x16...

Lot 1358

Safe

Safe, mounted on four casters, the left door is difficult to open, the left door latch is missing, the interior has original decal, there is no...

Lot 1359

Bar shear

Bar shear, Hendley and Whitemore manual bar shear, 6 inch blade length, with counterweights on shop made base. Old unit. Model number four.

Lot 1360

Drill press

Powermatic Drill press, model 1200, serial number 8620V203, floor model, manual down feed, 1.5 hp, 208/230/460 V, three phase, variable speed ...

Lot 1361

Paper shear

Paper shear, 30 inch width capacity, older shear.

Work bench cabinet, steel construction, two shelves, front door, rusted top, appears to be in fair condition.

Copyright Tracer attachment, model CR -three, serial number 1076 - 557, with hydraulic power supply. ...[more]

Lot 1364

Drill press

Delta drill press, floor model, step pulley head, old unit.

McDonough Drill bit sharpener, Sn DG 4320, 2 1/2 inch bit diameter, mounted on base, with grinding wheel, three phase.

Lot 1366

Profile grinder

Boyar Schultz Profile grinder model number two, 2 hp, 440 V, three phase.

Perishable tooling assorted mill cutters, various sizes and types.

Perishable tooling assorted mill cutters various types in sizes.

Lot 1369

Drill press

Clausing Drill press model 2274, serial number 506628, manual down feed, variable speed step pulley head, 150 -2000 RPM range, 10 inch throat, ...

Lot 1370

Drill press

Arboga Maskiner Drill press geared head, tapping capabilities, forward and reverse control, model GL2524, serial number 227172, 230 V, three ph...

Oliver Disc and spindle sander model 34 - DSD, serial number 63385, 30 inch disc, the spindle shaft table is 24“ x 26“, 5 hp, 220 V, three pha...

Lot 1372

Hardness tester

Clark Industries Hardness tester model DCR -eight, serial number DC7892, does not have assorted diamond tips.

Lot 1373

Chopsaw

CTD Chop-saw, Model F255, serial number 790, blade RPM 3900, 10 inch blade, pneumatic down feed, 2 hp motor, 208 -230/460 V, three phase, doe...

Lot 1375

Single end punch

Stripper fabricator, single end punch, model 10 – AA, serial number 114862359, machine number 1148, 440 V, three phase, does have a quantity of...

Lot 1376

Sander

2 belt sander mounted on base, 2” belt sander, mounted on base.

Lot 1377

Butt welder

Do All butt welder, serial number 290 - 777749, 480 V, single phase, 7.2 kVA, mounted on its own base.

Lot 1378

Vertical bandsaw

Do all Vertical bandsaw model 14, serial number 413248, 14” throat, butt welder, the rubber wheels are in good condition, with blade, has a dry ...

Electro Arc Tap disintegrator, using disintegrator head model ARC- ER, serial number 13739, 28 V, 3 A, standard worktable, manual raise and lo...

Lot 1380

Tapper

Jiffy Tap automatic tapping station, model 3T - B8 -6 -ES, serial 2352 -2U, self contained hydraulic power pack, Parker Z pack, vertical shaft m...

Lot 1381

Drill press

Wilton Drill press model 2040, serial number is unknown, has added pneumatic down feed, 20“ x 24“ T slide table, pushbutton starter, includes ...

Devlieg Spiramatic jig mill, model 4B -72, serial number 16 - 237, spindle speed 21–1000 RPM, adjustable bar feed includes the two axis digital re...

Lot 1383

Drill press

Giddings & Lewis-Bickford Drill press serial number 977 -00425–74, geared head , 3 inch spindle, power down feed, 24” inch throat, 24“ x 28“ T...

1998 Mitsubishi Vertical machining center V 360, Serial number CVA 819, does not have a machine control, parts only, Buyer loads at buyers expense...

Lot 1385

Metal cabinet

Metal cabinet swing out drawers, sliding doors, 14 drawers.

Perishable tooling quantity of tapered shank drill bits and core bits, multi flute, larger sizes, appear to be in good condition.

Perishable tooling assorted mill cutters, various sizes and types.

Perishable tooling assorted tool holders various sizes and types.

Lot 1389

CNC lathe

Mazak CNC lathe model Quick Turn 28N, -U, serial number 84838, date H1 - 8, the machine weighs 11,440 pounds, Mazatrol T 32-two control, 12 inch t...

Eriez magnetic chip conveyor, approximately 12 inches width and approximately 7’length, gearbox drive, conditions unknown

Caterpillar Perkins Diesel power engine three cylinder, serial number 5DW01325, full load RPM 2300, AR 145 -6693, 18.4 hp, located inside a ca...

Perishable tooling tapered shank, various sizes, mostly large sizes, various conditions.

Perishable tooling assorted drill bits smaller sizes, most are tapered shank.

Lot 1394

Outrigger rails

Outrigger rails for a boring mill approximately 10 foot in length, brand-name is unknown.

Tongil Power Turn CNC vertical turret lathe , model Tvl-20R, serial number C6E18100007, Saneck Korea series 0T control, 15 inch three jaw chuck, 1...

Lot 1396

Drill press

Enco Drill press model 126 -2220, serial number 28319, 1 hp, Morse taper #4, manual type, step pulley head, floor model, T-slot table, 120 V, ...

Lot 1397

Drill press

Wilton Drill press Model 24203, serial number 51236, 440 V, 8 RPM selections, 85 up to 1460, forward and reverse, power down feed, T-slot tabl...

Lot 1398

Drill press

Bench model drill press, step pulley head, 6 inch throat, 120 V, condition unknown.

Lot 1399

Power Shear

Pearson hydraulic shear, under driven type, serial number 5190/1, 10 gauge thickness, 8 foot width, hydraulic hold downs, does not have a squari...

Lot 1400

Lathe

Hardinge lathe model 98, serial number S 1097, collet spindle, 10 inch swing, compound cross slide, tailstock, with base, has 2 Westinghouse s...

Lot 1401

Thread chaser

Landis Threader equipped with threading head model 6 RX -5095, three-quarter inch Landco, there are no extra die head or thread cutters with thi...

Lot 1402

Vertical bandsaw

Delta Vertical bandsaw serial number 39-8024, 14” throat, power cable has been removed. Condition is unknown.

Lincoln welding power supply model Square Wave tag 355, code number 10055, serial number U1940521286, 208/230/460 V three phase, this is non ...

Lot 1404

Gap press

Aida gap press model PC-15020, serial number 00115 -0738, 150 ton capacity, 7.8 inch stroke, 45 strokes per minute, bolster area 488 X 248 mm, sli...

Lot 1405

Gang drill

Clausing gang drill, 4 head, model 2235, serial number 108080, 106009, 107779, 106007, non-variable speed, two positions have power down feed, ...

Lot 1406

Jig mill

Herbert Devlieg Model 2B36, This is a parts machine.  Buyer is responsible to pay for rigging services/charges. ...[more]

Lot 1407

Drill press

Match multispindle drill press, serial number G6 -532, 16 spindles, half inch uppers, power raise and lower table and spindle, condition unknown

Lot 1408

Fixturing plates

Fixturing plates, custom built, holes are drilled and tapped, with hold downs.

Lot 1409

EDM Machine

Maxi Mart EDM Machine, sinker type, with controls, no extra tooling, condition unknown.

1998 Mazak Horizontal machining center model H – 410, serial number 104058, 60 automatic tool changer capacity, Mazatrol 32M control, two pallets,...

Lot 1411

Lathe

TOS Trencin Engine lathe model SN63C, serial number 463300910364, 10 up to 1000 RPM, English and metric thread, 24 inch 4 jaw combination chuc...

Milwaukee Kearney and Trecker Horizontal milling machine, model three plain, 12“ x 54“ table, 20 up to 100 RPM, serial number 54–3598, power in...

Lot 1413

Power scooter

Cushman Power scooter gas power, three wheel design, model 898309- 7420, approximate vehicle weight is 370 pounds, has not functioned for sev...

Lot 1414

Wire welder

Lincoln wire welder model Power Mig 180, serial number you 106-080-4372, code 11257, welding amp range 30 up to 180, 130 A, 30% duty cycle, 208...

Loading...Loading...
  • 311 item(s)
    /page

Recently Viewed Lots