Piston Filling Line, Lollipop Lines, Empire Rack Oven, Coating Pans, Metal Detectors, Enrobers, Cookers, Pullers, Mixers & more

Refine your search

Estimate

Filter by Price Range

Primary Category

Category

Brand

Item Type

State/Province

Town/City

You’re currently pending approval by the auctioneer. In the meantime you can continue to place bids from the lot page which will be accepted once you’re approved.
There are 81 item(s) within this sale
  • List
  • Grid
  • Lots per page
  • 60
  • 120
  • 240
Page of 2

This auctioneer has chosen to not publish their results. Please contact them directly for any inquiries.

Food Tools Model ACC-10USRW Ultrasonic Cake Cutter - Air-operated automatic ultrasonic cutter -- Built 2003 - Serial#2891 - Single phase, 240 vol...

Carbon Steel 3 x 6 ft Water Cooled Table - 6' long x 3' wide x 31" high - Water jacketed. Stock#82858. Located NJ - Rigging Free. Skid and cratin...

Carbon Steel 3 x 8 ft Water Cooled Table - 8' long x 3' wide x 31" high - Water jacketed. Stock#82856. Located NJ - Rigging Free. Skid and crating...

Carle and Montanari R1/U Center Filler - 1 HP, 3 phase, 60 cycles, 220/380 volts - Serial #15077. Stock#82855. Located NJ - Rigging Free. Skid and...

Stainless Steel 3 x 6 ft Water Cooled Table - 6' long x 3' wide x 32" high - Water jacketed. Stock#82857. Located NJ - Rigging Free. Skid and crat...

Ter Braak Oiling Drum - Model 7100 - Serial number 7100 F029 - Oil dispenser. Stock#82896. Located Utah - Rigging Free. Skid and crating additional

Chocotec S60 600mm Enrober - 600 mm (24") wide enrober - Jacketed chocolate Pump, flow pan, blower - Jacketed return chocolate pump - Variable spe...

American Machine and Design 34" Co-Extruder with Guillotine Cutter - 34" wide Co-Extrusion head - 34" wide Guillotine cutter, Double eccentric up ...

Werner Lehara 24" Continuous Extruder with Guillotine Cutter - 24" water jacketed rollers - Hopper - (5) Filler blocks - (5) dies - 1" x 1-1/8" - ...

Chocotec 32" Enrober - Model S80, serial#990074 (1999) - Jacketed and agitated holding tank - Wire mesh belt conveyor - Shaker - Blower - Jacketed...

38" Stainless Steel Ribbed Coating Pan - 24" Diameter opening - 33" depth - 12 welded ribs. Stock#82863. Located NJ - Rigging Free. Skid and crati...

Acme Coppersmithing 36" Stainless Steel Coating Pan - 36" diameter smooth bowl - 24" opening - 36" depth - Enclose base fixed speed - Motor 1HP 3/...

Acme Coppersmithing 36" Stainless Steel Coating Pan - 36" diameter smooth bowl - 24" opening - 36" depth - Enclose base fixed speed - Motor 1HP 3/...

Acme Coppersmithing 36" Stainless Steel Coating Pan - 36" diameter smooth bowl - 24" opening - 36" depth - Enclose base fixed speed - Motor 1HP ...

Acme Coppersmithing 36" Stainless Steel Coating Pan - 36" diameter smooth bowl - 24" opening - 36" depth - Enclose base fixed speed - Motor 1HP ...

Acme Coppersmithing 36" Stainless Steel Coating Pan - 36" diameter smooth bowl - 24" opening - 36" depth - Enclose base fixed speed - Motor 1HP ...

Acme Coppersmithing 36" Stainless Steel Polishing Pan - 36" diameter smooth bowl - 24" opening - 36" depth - 16 sanitary ribs - Enclose base fixed...

Acme Coppersmithing 36" Stainless Steel Polishing Pan - 36" diameter smooth bowl - 24" opening - 36" depth - 16 sanitary ribs - Enclose base fixed...

Acme Coppersmithing 36" Stainless Steel Polishing Pan - 36" diameter smooth bowl - 24" opening - 36" depth - 16 sanitary ribs - Enclose base fixed...

Acme Coppersmithing 36" Stainless Steel Polishing Pan - 36" diameter smooth bowl - 24" opening - 36" depth - 16 sanitary ribs - Enclose base fixed...

42" Stainless Steel Angular Coating Pan - 22" Diameter opening - 38" depth - 6 welded ribs - Variable speed drive. Stock#82862. Located NJ - Rigg...

Otto Hansel 36" diameter Copper Coating Pan - Model HDM.1X - 25" Diameter opening - 27" depth - Serial #2667 NO gas burner. Stock#82864. Located N...

Hansella 6 ft Horizontal Batch Roller - Model 19H - Electric heaters - Raising and lowering motor - 3 phase, 50 cycles, 380 volts. Stock#82852. L...

Hansella 6 ft Horizontal Batch Roller - Model 19H - Electric heaters - Raising and lowering motor - 3 phase, 60 cycles, 575 volts. Stock#82850. Lo...

Hansella 6 ft Horizontal Batch Roller - Model 19H - Electric heaters - Raising and lowering motor - 3 phase, 60 cycles, 575 volts. Stock#82851. Lo...

Hema-Maschinenbau Rope Sizer - Type AZM-SW1 - 3 stage - Serial #636/69. Stock#82871. Located NJ - Rigging Free. Skid and crating additional

Latini Model HLM-1 High Speed Lollypop Machine - 24 Station Rotary die - 1-1/8" x 7/8" oval flat pop (5 grams) with 2" x 2" cellophane four sided...

Latini model C Lollipop Former with 4-side Seal Wrapper - Candy knife - 11-station rotary press set for 1-1/8" diameter (approx.) flat pop - 3" lo...

Latini model C Lollipop Former with 4-side Seal Wrapper - Candy knife - 11-station rotary press set for heart shape 1.25" long x 1.25" wide (appr...

Latini model C Lollipop Former with 4-side Seal Wrapper - Candy knife - 11-station rotary press set for 1" diameter (approx.) flat pop - 3" long s...

Latini model C Lollipop Former with 4-sided Seal Wrap - Set for pop measuring approximately 1" diameter - 4 side seal wrap – 2" wide wrapper - 11-...

Otto Hansel model HWR-V Soft Candy Vacuum Cooker - Stainless steel, steam jacketed and agitated cooker - Vacuum pump with condenser - 29" diameter...

Otto Hansel model SKH2 Hard Candy Vacuum Cooker - Top section steam jacketed and agitated - Copper receiving kettle which tilts to discharge - Vac...

Ruffinatti model TZ40 Candy Puller - Up to 70 kg batches - Hydraulic pump - 3 phase, 50 cycle, 380 volts. Stock#82817. Located NJ - Rigging Free. ...

Jinhong model JH-S800 Double Twist Wrapper - Hard candy wrapper - Set for piece approx. 5/8" x ½" rectangle (approx.) - Vibratory feeder - Dual pa...

Jinhong model JH-S800 Double Twist Wrapper - Hard candy wrapper - (2) feed plates: 5/8" x ½" rectangle (approx.), ¾" x ½" oval (approx.) - Vibrato...

Flow Wrapper for Hard Candy - Sick electric eye for film registration - Vibratory bowl feeder - Two feed plates: 1" x 7/8" oval, 7/8" round (appro...

Forgrove model 42C Cut & Double Twist Wrapper - Set for piece approx 1" long x 3/8" diameter - Dual Paper arbors - Scissor candy knife - Rotary pa...

Automatic Industrial Machines (AIM) Flex Screw Conveyor - Carbon steel flexible screw - 13' long x 2' diameter screw - 30" x 30" stainless steel h...

Coulter 5 gallon Stainless Steel Single Action Cooking & Mixing Kettle - Electric heat - Manual tilt - Scrapered agitator - ½ HP, 3 phase, 60 cycl...

Groen TDB/4-20 quart Stainless Steel Cooking Kettle. Stock#82872. Located NJ - Rigging Free. Skid and crating additional - Electric - Manual tilt...

Great Western 12-Deck Starch Sifter - 12 screens - 48" x 36" x 53" - 3/60/480v. Stock#82898. Located Utah - Rigging Free. Skid and crating additio...

Patterson Kelley 5 Cu Ft Stainless Steel V-Blender - Rated 95 lbs/cuft - (2) 18" diameter feed ports with covers - 6" diameter discharge with butt...

Seasoning Drum 32" Diameter x 54" Long - Stainless steel hopper 34" x 16" - 36" discharge height - 1/3 of the center section of the drum have 3/16...

Sprout Waldron DM24 24” Stainless Steel Primary Peanut Butter Mill - 304 stainless steel contact parts - Koppers screw feeder with 1 HP, 230/460 v...

Sprout-Waldron (Andritz) 12" Stainless Steel Peanut Butter Mill - Output: 400 to 500 lbs/hr - 304 stainless steel contact parts - Screw feeder wi...

Jaccard model TSHY Semi-Automatic Meat Tenderizer - 544 stainless steel surgical blades - Adjustable height - 30 square inch tenderizing area at 6...

Stephan VCM-60E Cutter/Mixer - Motor driven top scraper - 2-Speed blade motor, 3500/1750 rpm - 3 phase, 60 cycle, 220 volts - Spare set of serrate...

Vemag model Robot 500 Stuffer - Stainless steel agitated hopper - (2) Sets of screws: Part#916310048 #72W on end of screws & part#11353 #48N on en...

Nut Chopper with Vibratory Sieve Separator - Up to 440 lbs/hr - Can produce from large pieces to meal - Particle size adjusted by changing speed o...

10-Head Rotary Scale Weigher with Smooth Buckets and platform - Model 6B10-2B-1x, serial#1706028 new 2017 (made in China - We are told by High Dre...

Excel Packaging Stainless Steel Metal Detctor 11.5" wide x 3" tall opening - Model MD3-3010 - 10" wide x 48" long plastic belt conveyor - Arm reje...

Sheyhang model KL-420 Vertical Form, Fill and Seal Machine - Sold without filler - Width: 80 to 200 mm, Length: 80 to 300 mm - New 2017. - 3 phas...

Goring Kerr Teknamet Metal Detector with 8-3/4" wide x 2-7/8" tall Opening - 120" long x 8-3/4" wide conveyor - ½ HP, 1 phase, 60 cycles, 115 volt...

Safeline Metal Detector with 12.5" wide x 2.5' tall opening - 9' long x 12-1/2" wide cleated belt conveyor - 6-1/4" long x 12-1/2" wide x ¾" high ...

3M Matic Model 120AF Top and Bottom Case Taper - Top and bottom heads - 2" tape - Side pull through belts - 1/60/115v. Stock#82900. Located Utah -...

Loading...Loading...
  • Lots per page
  • 60
  • 120
  • 240
Page of 2

Recently Viewed Lots