Vacuum Furnaces, Pumps, Plus More to be Added!

Refine your search

Estimate

Filter by Price Range

Primary Category

Category

Brand

Item Type

State/Province

Town/City

You’re currently pending approval by the auctioneer. In the meantime you can continue to place bids from the lot page which will be accepted once you’re approved.
There are 64 item(s) within this sale
  • List
  • Grid
  • Lots per page
  • 60
  • 120
  • 240
Page of 2

Results for live webcast and timed auctions may not have been verified by the auctioneer. If you are in any doubt of the accuracy of the prices provided, please call the auction house to confirm.

GM Enterprises Model HVF-701 Vacuum Furnace, 48"H x 48"W x 60" Long Work Zone, 2500 Degree Maximum Temperature, 5,000 LBS Load Capacity, 10-5 – 10...

Stokes Model Microvac 412H-11 Vacuum Pump, Fully Febuilt Microvac Piston Pump, Brand New Wedges, Slides, Eccentric Shaft and Bearings, New valves ...

Tuthill/Kinney Model KMBD 850 Blower, 20-HP, 800 CFM, Dual voltage 208/460 V, 24.5 AMP, 3,500 RPM GE Motor, Water Cooled, 11" OD Flange, 6" ID Ver...

Sunbeam (Seco Warwick) Model 40236 Vacuum Furnace ID Size – 36” Wide x 120” Long x 36” High, 1400 Degree Celsius (2552 Degree Fahrenheit) Maximum ...

Milltronics “Partner V (5D)” Vertical Knee-Type CNC Mill, 15” x 48” Table, Centurion V Control, S/N 1661901 (LOCATED IN FARMINGDALE, NY)

Okuma & Howa "Millac 511v" Vertical Machining Center (NO VISES), Cat #40 Taper, 20" x 48" Table, Fanuc 18-M Control, 24-Position Automatic Tool Ch...

Leadwell V-60 Vertical Machining Center, Fanuc 21-M Control, 29.5” x 65” Table, 24-Position Tool Automatic Tool Changer, S/N L1SIG0285, currently ...

DEA “Omnicron” A001 Cantilever Type CMM, 24”x36”x 4” Ottavino Drilled & Tapped Surface Plate (Recently Calibrated), Apprx 14” Under Rail, Tooling,...

10” X 15” Covel Mdl. 17H Hydraulic Feed Surface Grinder, Walker Ceramax Permanently Magnetic Chuck, S/N 17H-5739 (LOCATED IN FARMINGDALE, NY)

Nestor Gear Shaper (Similar to Fellows #7), Rack Attachment, S/N: 1756813 (LOCATED IN FARMINGDALE, NY)

Kuraki KV-500 Vertical Machining Center, (NO VISES), 13.5” x 14.75” Table, BT-40 Taper, 20-Position Automatic Tool Changer, Fanuc 6-M Control, S/N...

Kuraki KV-700 Vertical Machining Center, (NO VISES), 18” x 39” table, BT-40 Taper, 24-Position Automatic Tool Changer, Fanuc 6-M Control, S/N 8318...

3-Ton Shaw-Box “Lift-Tech” Electric hoist with Pendant (LOCATED IN TRENTON, NJ)

Lorain Approx. 200-Ton X 18’OA Mechanical Press Brake. Apprx 16’ Between Housing, Pit-Type Machine, 24” Wide Bed, Motorized Ram Adjustment, Assort...

2-Ton Harrington Electric Chain Hoist, (LOCATED IN TRENTON, NJ)

(5) Assorted Hydraulic Cylinders, (LOCATED IN TRENTON, NJ)

Phoenix Type 300, Mdl. PP Dry Rod Oven, 100-550 Degree, 840 Watts, (LOCATED IN TRENTON, NJ)

Phoenix Type 300, Mdl 15A Dry Rod Oven, 1000 Watts, (LOCATED IN TRENTON, NJ)

Wallace Size 16 Abrasive Cut-Off Saw, Manual Down Feed, 5HP, S/N 1715, (LOCATED IN TRENTON, NJ)

Oliver Mdl. 600 Drill Grinder, S/N G-7384, (LOCATED IN TRENTON, NJ)

6”x 12” Covel Mdl 7A Handfeed Surface Grinder, S/N 7A-1722, (LOCATED IN TRENTON, NJ)

6” Excello Double End Carbide Grinder, S/N 381, (LOCATED IN TRENTON, NJ)

Oster Pipe Threader with Dies, Cut-off, (LOCATED IN TRENTON, NJ)

36” Timesaver Mdl 137-1HDMW Wet-Type Vertical Belt Sander, S/N: 22261 (LOCATED IN TRENTON, NJ)

Lincoln R3S-600 Welding Power Supply with Lincoln Squirt Mobile (LOCATED IN TRENTON, NJ)

Caterpillar Mdl 246d Skid Steer, S/N CAT0246DLBYF03232 (LOCATED IN MIDDLESEX, NJ)

2006 Brown & Sharpe MDL 7.7.5. Coordinate Measuring Machine, Renishaw MH20i Probe, S/N: 0506-7021,(LOCATED IN MIDDLESEX, NJ)

2009 Doosan Infracore Puma 2600L CNC Lathe, 10” Dia. Chuck, 50” CC, Steady Rest, Tailstock, 3” Spindle bore, Chip Conveyor, Tool Pre-Setter, Fanuc...

Kysor Johnson Amada Model HA-250 10" Automatic Horizontal Bandsaw, 10" x 12" Rectangular, 10" Round Capacity, 1" x .042 x 11'6" Blade Size, Comple...

Peddinghaus C-Frame Hydraulic Punch with Hydraulic Power Supply (Located in Windsor Locks, CT)

Hurco Model PH30-12 48” x 33-Ton Capacity Hydraulic Press Brake, with 3-Axis CNC Back Gauge Control with Touch Screen Operator Interface, 24” Back...

Guifil Model PE20-60 80” x 66-Ton Capacity Hydraulic Press Brake, with Automec CNC 1000 3-Axis CNC Back Gauge, 24” Back Gauge X-Travel, (Back Gaug...

Verson 48” x 15-Ton Capacity Mechanical Press Brake, with 24” Programmable Back Gauge with Shop-Built PC Based Controls (Need new PC), 208V/240V/4...

Air Operated Press Brake Complete with Pneumatic Foot Pedal Control, Some Tooling Included (No Charge for Loading) (Located in Freeport, NY)

Lot 36

Kick Press

Kick Press ( Located in Freeport,NY)

Mecon Model 250F18I Servo Feed for Coil Fed Press, 18” Maximum Coil Width, 0.125” Thickness Capacity at 12” Width, 0.9” Capacity at Full Width, S/...

Cieco Automator II Press Control Removed from Working Machine, Touch-Screen Control Mounted to Pedestal with Control Buttons, Additional Remote Pa...

Sankyo Model VG75 Press Coil Feed, High-Speed Coil Feeder for High-Speed Stamping Press, Feed Length up to 2.95”, Coil Thickness 0.079” Capacity, ...

Coilmate Model CM3042 3,500# Capacity Pallet-Style Uncoiler, Platform Size 42” x 42”, Coil Capacity 6” Wide x 0.065” Thick, For Use with Coil-Fed ...

Rapid-Air Model R46AP Coil Reel Uncoiler / Rewinder, 36” Diameter x 6” Wide Coil Capacity, Vari-Speed, 120V/1PH/60HZ Electrics, S/N: 83832 (No Cha...

Grizzly 10” Grinder Mounted on Stand, 120V/1Ph Electrics,Model# H7759,(No Charge for Loading) (Located in Freeport, NY)

25-HP 2-Stage Reciprocating Tank Mounted Air Compressor, with 120-Gallon Capacity Tank, Upgraded Muffler / Silencer Air Filters, 208V/220V/440V/3P...

Hitachi 14” Abrasive Chop Saw on Stand, Can Cut Wood & Aluminum with Carbide Dipped Blades, Complete with Mounting Stand (Can be Palletized and Lo...

Lot 45

Engine hoist

Engine Hoist with Manual Jack Operation (Can be Palletized and Loaded at No Additional Cost) (Located in Freeport, NY)

Powder Coating Paint Booth with 3‐stage filtration for recirculation of air into building without needing to exhaust two outdoors. Stages are blan...

Ryobi Drill Press Variable Speed, Seller can load at no additional charge. (Located in Freeport, NY)

Delta Radial Arm Saw, Model 33‐990, Serial# 95C95432, (Seller can load at no additional charge) (Located in Freeport, NY)

150-Ton x 12’ Haco “Synchromaster” Mdl. SRM 150-12-10 CNC Hydraulic Press Brake (2009) (NO DIES), 144” Overall Bed Length, 124” Between Housing, 7...

1985 5/32” x 80” Adira Mdl. GHO/0420 Hydraulic Shear, Power Back Gauge

Bliss Model C-22 22-Ton Capacity Stamping Press, 2-1/2" Stroke, 9-1/4" Shut Height, 2-1/4" Slide Adjustment, 24" x 14" Bed, Complete with Dual Pal...

T-M VACUUM SERIAL NUMBER:1Y1712 AMPS:80 PHASE:3 VOLTS:480 HERTZ:60 TYPE FURNACE: SHELF OVEN FURNACE INSIDE CHAMBER:33" D X 44"...

ROLOCK TYPE FURNACE: PUSHER GAS-FIRED WITH INTERNAL QUENCH OPERATING TEMPERATURE:1500 F FURNACE SIZE:20" (508mm) H X 32.5" (825.5mm) W X ...

CORBETT INDUSTRIES SERIAL NUMBER: N/A INTERIOR SIZE:37" D X 25" H (OPENING) X 52" WIDE ELECTRIC FIRED ( LOT LOCATED IN NORTH BRANFORD,...

Billet Furnace Serial Number: 92062 Max. Temperature: 2300 Degrees F Furnace Opening: 23" (584mm) W x 1-3/4" (44mm) H Type Furnace: Bo...

BOYAR-SCHULT TYPE: SURFACE GRINDER SERIAL NUMBER: 11544 MAGNETIC CHUCK: 6" X 12" HANCHETT MAGNA-LOCK MODEL 612CL, SERIAL NUMBER ...

BOYAR-SCHULTZ TYPE: SURFACE GRINDER SERIAL NUMBER: 13909 MAGNETIC CHUCK: 6" X 12" O S WALKER CERAMAX CHUCK DRIVE MOTOR: 3/4 HP, 230/460 VO...

PARAGON MODEL RG18-1 HEAT TREAT BOX FURNACE YEAR OF MANUFACTURE:2/2003 SERIAL NUMBER:349145 MODEL:RG18-1 VOLTS:220 PHASE:1 HERTZ...

TYPE: CROSS-CUT SAW FOR TUBE, BAR, SLAB, OR INGOT BLADE DIAMETER: 18" MAXIMUM CROSS TRAVEL: 72" WORKPIECE DUAL GRIPPERS W/MANUAL ADJUSTM...

3" (76mm) CIRCULAR TUBE CUT-OFF SAW YEAR OF MANUFACTURE: APPEARS TO BE LATE 1980'S OR EARLY 1990'S TYPE: CIRCULAR TUBE CUT-OFF SAW HYDRAULIC...

NAMCO MODEL RV6 CNC ROTARY TRANSFER MACHINE MANUFACTURER: NAMCO (NEW AUTOMATIC MACHINE CO.) S.A. SWITZERLAND (NOW CALLED MIKRON GROUP, SWIT...

Loading...Loading...
  • Lots per page
  • 60
  • 120
  • 240
Page of 2

Recently Viewed Lots