Large-tank agitator. Was used in waste water. Two lobe 20" diameter S/S propeller on S/S 3" shaft. Agitator is mounted on cast aluminum collar wit...

Stein JSO IV Oven. Removed from service March 2017. Two sections. Each has 22' of belt in the oven. Overall cooking length is 44'. Belt wid...

CEIA THS Box Metal Detector with 13 3/4"H x 27.5"w opening. 24" wide x 64" long belt. MDL CS2000. On casters. Touch controls. Less motor and gear...

10-station poultry trim conveyor (Partial). Was 20 station. Rest was kept by plant. Designed for center 12" infeed conveyor with 6" take away co...

Flat Contact Crusting Freezer 20'L x 36"W. With two belt guide rollers and 5HP 230/460V motor/gear drive. Less belt and end rollers. OD = 20' x 5...

5"L x 34"W incline wire belt conveyor. In at 24" and discharge at 48". With drip pan. 3hp 230/460V center drive. Legs have receivers for threaded...

Self-contained Portable Roots Rotary Lobe Pump. Mdl: 59-U-RAI. Driven by 10hp 230/460V 3ph 1770 rpm motor. With Solberg filter. S/S Control panel ...

Lot of Approx. 500' of Spiral Freezer Belt. 32"OW 30" Usable. 3/4" Pitch with 4 wraps per inch. Came off of a Spiro-Freeze freezer Mdl: 3414-126L...

36" l x 18"w section of S/S box roller conveyor. All rollers spin freely. OD = 36" x 22.5" x 30"H. With adjustable foot pads Looks in ready to wo...

19" x 16" S/S Sink with hinged perforated screen to allow sink top cleaning. 9.5" backsplash. 15" x 17' S/S sideboard. 2' Drain. OD = 34" z 19.5...

S/S 36"L x 12"W conveyor with blue food grade belt. With 7" sidewalls. Adjustable foot pads. OD = 37" x 22" x 40"H. A $20 loading fee, to place...

6"dia x 10.5'L S/S screw conveyor in S/S trough. Two discharge points. One 5.5" dia straight chute at 77" and 6" flanged at 120". Hyd end drive o...

6"dia x 54"'L S/S screw conveyor in S/S trough. 9" x 7" side discharge via S/S chute. Hyd end drive on discharge end. 5" pitch. Trough is 7"deep....

48" pivot vat dumper with 52" x 49" cradle. With adjustable hold down bar. Splash guard on three sides. No power pack or controls. OD = 86" x 77"...

MAYO Barrel Breader. 42" dia barrel by 62"Long. Flow control valves for Incline Auger, Outfeed conveyor, Bottom and Top Cross augers, Agitator, D...

Stein XL 40 flat breader. Just removed from service July 2017 and replaced with barrel breader. Complete in in good operating condition when remo...

10" wide Incline Hopper Conveyor. No belt. 116" incline. Hopper is 26" x 26" x 18"D. Hyd Drive. With drip pan. With couplers for connecting to the...

15HP Centrifugal Pump. Was used with Rooftop Condenser. 8"intake. 6" discharge. 14" dia. body. See Data plate picture for details. Offered AS IS ...

Hankinson MDL: DH115 Desiccant Air Dryer. Rated at 116 SCFM at 100 PSIG. Operates at 110/115 V. 1ph. Offered AS IS FOB Washington, MO

All S/S Lift and Pivot Dumper. Carriage is 55"w x 44"D. Single center-mount cylinder for lift. Dual side mount cylinders for pivot. Lift channe...

Two heavy duty S/S Vats with lids. 47" x 35" x 35"D. on HD 8" legs with adjustable foot pads. Offered AS IS, FOB Washington, MO

Heavy duty S/S Vat. 39" x 44" x 28"D. On 6" HD legs. With 1.25" top flange and reinforced top corners. Offered AS IS, FOB Washington, MO

Heavy duty S/S Vat. 39" x 48" x 30"D. On 6" HD legs. With 1.25" reinforced lip. Offered AS IS, FOB Washington, MO

Stainless steel vat. OD = 47" L x 36"W x 32" D. 1.25" flange reinforced lip for stacking. With reinforced floor. Offered AS IS FOB Washington MO

All S/S Work Platform. Flanged for fastening to equipment on one side. 6) 30"W step access on end. Gray fibergrate steps. OD = 74" x 64" x 100"...

St John S/S cooking tank with bottom mounted steam piping and counterweighted lid. Side top and bottom drain openings - 2.5" dia. OD = 4' x 3' x 3...

St John S/S cooking tank with bottom mounted steam piping and counterweighted lids. With drains. On 11" legs. Each side opening is 34" x 36". OD =...

HD S/S Vat. 40" x 36" x 36"D. On 6.5" HD legs. With 1.25" HD lip. Reinforced bottom. Offered AS IS, FOB Washington, MO

HD S/S Vat. 35" x 48" x 32"D. On 5.5" HD legs. With 1.25" HD lip. Reinforced bottom. Offered AS IS FOB Washington, MO

2000# All S/S Storage and Transfer hopper with 6" Flanged Discharge. Perfect for vacuum load, with 64" x 48" tank with a bottom that slopes from 2...

S/S Dunnage Rack with Fibergrate platform. Rack is 77" x 23" x 14"H. Offered AS IS FOB Washington, MO

S/S Work or Inspection Platform. 66"L x 26"W x 4"high to yellow fibergrate floor. With 4) S/S no-slip steps. 42" H Safety rails on two sides. O...

S/S HD Vat. 48" x 42" x 36"D. Flat 1.25" lip. With drain. On 5" HD legs. Offered AS IS FOB Washington, MO

S/S HD Stackable Vat. 48" x 48" x 36"D. Flat 1.25" lip. With drain. On right angle stackable HD legs. Offered AS IS FOB Washington, MO

S/S HD Stackable Vat. 40" x 44" x 36"D. Reinforced on 7" HD inset legs. 1.25" flat lip to accommodate stacking. Offered AS IS FOB Washington, MO

Cone shaped Vacuum load hopper. Top of cone is 59" x 40" which tapers to 9" x 9" over its 48" depth. On adjustable foot pads. 7" round flanged ou...

Rectangular Vacuum Loading Hopper with 6" flanged discharge tube. Top is 54" x 54" x 36" D sloping another 18" to discharge. OD = 56" x 60" x 65"...

Rectangular Vacuum Loading Hopper with 8" flanged discharge tube. Top is 56" x 58" x 12" straight side sloping over 48" fall to 18" at discharge. ...

HD S/S Stackable Vat (425 on side). 44" x 40" x 30"D. On 7" HD legs. 1.25" reinforced stacking flat bar top lip. Offered AS IS, FOB Washington, MO

HD S/S Vat (303 on side). 44" x 39" x 31"D. On 4.5" HD legs. 1.25" flat bar top lip. Offered FOB Washington, MO

Standard S/S 2000# Vat. 48" x 42" x 40" D. On 9" Legs. Side bottom drain. 1.5" top lip. Excludes rails and switches in vat. Offered AS IS FOB Wa...

RMF 66" Pivot Vat Dumper. With 48" x 52" Carriage. W/ hold down assembly. Dual Cylinder. With quick connect hoses. No controls. Solid S/S back sp...

2500 Vacuum, Dual-shaft Ribbon Blender with air controlled lid, and discharge doors. Less Vacuum pump. 1/2" thick tub wall. OD = 8" x 56" x 68"H. ...

Label Aire Labeler. MDL: 3115-2000 4" RH. S/N 02495500405. On adjustable height portable frame. With conveyor driven by 115V 5 amp motor. OD = 10'...

Rapid Pak RP 55 Roll stock machine. Index is 25.625 in Seal lift = 2.5". Film width is 550mm. Tooling is for an oval "Ham " package. With many ne...

Vacuum Load Hopper 48" x 62" x 45" Straight side which then slopes over a 24" D cone to a 6" flanged pipe discharge. (Reverse Goose Neck) Designed...

17'L x 18" wide hard plastic belt conveyor. With 16" air knife on input end. With 2hp 115V 1ph motor. Offered AS IS, FOB: Washington MO.

9500 Gal Fiberglass tank. 10' dia by 16' high. Flat bottom. 4" top flanged agitator mounting opening. 24" flanged top manway. 8" top overflow. Wit...

5500 Gal Fiberglass tank. 112" dia by 11' high. Flat bottom. 24" flanged top manway. 8" top overflow. With Butterfly valve and some S/S piping. Wa...

Fiberglass Tank. 60" diameter x 90" high Flat bottom tank used in brine mix system 24" Top manway. 3" female pipe thread openings. This tank is o...

Hanging Chub Smoke racks. Hangers not with units. Chub cradle is 5.25" dia x 43" Long. Holds 12 chubs, 6 on each side. OD = 11.5" x 43.5" x 65.5"...

S/S Dual wall-mount Sinks with Water dispenser. Sinks are 17" x 15" x 7" deep with 6" S/S backsplash. Offered AS IS FOB Washington MO

Lot of S/S Ball Valves, fitting, rings and gaskets. (3) ValMicro 1.5" 200 CWP valves. 1 2" 200cwp Valve. All Mdl: PP300TP. Triclover flanges. All...

150Gal S/S Kettle. Dover 45 psi S/S open top kettle with Center Bottom Outlet. With data plate. Appears solid. OD = 47" x 46.5"H. Offered AS IS, ...

Mueller Porta-Tank. ID = 42" x 42" x 68"D. With side bottom outlet. 4 3/4" H stackable legs. 18" dia center top opening. No lid. Mueller Porta-Tan...

60"L Incline Conveyor - 20" w/ Intralox belt driven by 1hp 230/460. In at 36"; discharge at 50" elevation. 3" S/S side rails. Offered AS IS FOB ...

Vilter 2-Cyl Ammonia Compressor. 5hp 230/460v motor. With two valves, filter, and pressure gauges. On C/S frame. OD = 70"L 48"W x 52.5"H. Offered ...

Mincemaster 100 HP Emulsifier including many parts: 3 knives, 2 blades, discharge piping, drive belt, and tools. S/S Hopper. On HD frame on caster...

Rietschele VC 400 Vacuum Pump. 50/60 cyl. 400/480V. 3ph. 17.537"W x 24"H. Offered AS IS FOB Washington, MO.

S/S Workhorse 400# LH Column Dumper. Stationary chain-lift design. Adjustable dump from 84" to 120". 230/460V. OD = 152"H x 56" W x 22" D. With ...