Refine your search

Estimate

Filter by Price Range

Category

Auction Details

2nd Quarter Consignment Auction (PLEASE READ T & C)

Levy Recovery Group Timed Online Auction Ended May 10, 2017 2:10pm ET (7:10pm BST)

Sale Date(s)

  • Ended May 10, 2017 2:10pm ET (7:10pm BST)

Venue Address

  • PO Box 7694
  • Bloomfield
  • Michigan
  • 48302
  • United States

Auction Details

Important Information Terms and Conditions Print Catalog
Currency: USD
Buyer's premium: 16.50%
Tax on hammer: 6.00%

Auctioneer Details

You’re currently pending approval by the auctioneer. In the meantime you can continue to place bids from the lot page which will be accepted once you’re approved.
There are 126 item(s) within this sale
  • List
  • Grid
  • Lots per page
  • 60
  • 120
  • 240
Page of 3

This auctioneer has chosen to not publish their results. Please contact them directly for any inquiries.

PRODUCTION CENTER Serial Number: 581-0008-94 New 1994 SPECIFICATIONS: Swing of Spindles: 39.4 " Spindle Nose, ANSI Standard: A2-11 Spindle Bore...

FC30HT-12, S/N: 5170004, cushion tires, LP Fuel, 3 Stage Mast, 180" Mast Height, Side Shift, Heated Cab w/ doors, 42" forks   WARREN, MI  ...[m...

John Deere Diesel Engine Fire Pump, Brand New, 300 testing hours only Warren, MI ...[more]

John Deere Diesel Engine Fire Pump, Brand New Warren, MI ...[more]

Electric S/N: 1A179981, Narrowl Isle, New Battery, Hard Tire, 208" Lift, 3 Stage Warren, MI ...[more]

10Ton x 10Ft Spreader Warren, MI ...[more]

S/N 21710, Spindle Speeds 80 - 1200 RPM, 40" x 20" Adjustable Height T-Slotted Table, Reversing, Manual Downfeed, 6" Vertical Head Adjustment, Coo...

S/N 250335, Wheel Size 20" Diameter x 2-1/2" Face, 3- Hp, 1800 Wheel RPM, 10" x 11" Tilting Worktable WARREN, MI ...[more]

S/N: 162, Year 1995, 2-axis turning center, with 26.4"/19.3" max. swing/turning dia., X-10.6", Z-67.9", (12) tool turret, 6- 1,500 RPM, 15" dia. 3...

300 mm (11.8") Swing, 500 mm (20") Center Distance, 30 Degree wheel angle, Dead / Live Spindle work head, Control: Fanuc 18T, Form Dresser, Coolan...

TABLE SIZE 12" X 35", X=30", Y=14", Z=14", SPINDLE SPEEDS 0 - 4000 RPM,SPINDLE DRIVE 5 HP, SPINDLE TAPER CAT 40, FADAL MICRO-PROCESSOR 3D CONTROL ...

4' Arm Length, 13" Columb Diameter, 12" Spindle Stroke, 1800 RPM Spindle, No. 4 MT Taper. DRYDEN, MI ...[more]

20" X 94.5" Table, 60" Table Travel, 24" Spindle to Table, 20" X 94.5" Table Feeds, 16-1600 RPM Spindle Speeds, 50 HP Motor, 24" Vertical Travel, ...

36" Magnetic Chuck, 21"-24" Vertical Range, 720 RPM Wheel Speed, (6) Ranges of Chuck Speeds 6, 9, 12, 18, 25, 33 RPM, 50 Horse Power Spindle, 42" ...

18" X 22" Table Size, 18" Throat, 22" Work Height, 1" Blade Width, 50 - 450 FPM Speed, 3/4HP., 1750 RPM, 220/440V Motor. DRYDEN, MI ...[more]

500 LB Capacity, with Quick Hoist ALMONT, MI BUYER MUST HIRE OWN RIGGER ...[more]

1000 LB Capacity with 4 Ingersol Rand Hoists ALMONT, MI BUYER MUST HIRE OWN RIGGER ...[more]

4000 LB Capacity with Spacesaver Hoist, 12'6" Span x 23'6" Long x 13'6" Height ALMONT, MI   BUYER MUST HIRE OWN RIGGER ...[more]

Ravne Type DE3150KN, Model DE315, 3, 150 kn (350 Ton) Capacity 2-Point Eccentric Geared Straight Side Press, S/N 3150-D-74 (1985), PRESS No. 7 Bed...

Twin Drive Open Back Gap Press, 60" x 30" Bed & Ram, 10" Stroke, 32.5" Shut Height, 6" Adjustment, 40 SPM, 2 Cushions, 6" Thick T-Slotted Bolster,...

250 Ton Capacity, 72" x 60" Bed & Ram, 14" Stroke, 8" Adjustment, 20" Shut Height, 28 SPM, Air Clutch & Brake, 6" Bolster, 29" x 29" Windows, Dual...

300 Ton Capacity, 60" x 36" Bed & Ram, 6" Stroke, 24" Shut Height, 24" x 16" Tall Windows. ALMONT, MI   BUYER MUST HIRE RIGGER ...[more]

5 HP Capacity, 2-Stage Vertical Tank.   ALMONT, MI   BUYER MUST HIRE RIGGER ...[more]

With Hobart #2410 Wire Feed. ALMONT, MI   BUYER MUST HIRE RIGGER ...[more]

64" Throat, T-Slotted Base.   ALMONT, MI   BUYER MUST HIRE RIGGER ...[more]

300 Amp.   ALMONT, MI BUYER MUST HIRE RIGGER ...[more]

300 Amp.   ALMONT, MI   BUYER MUST HIRE RIGGER ...[more]

16"/24" x 56" Geared Head Gap, 45-1800 RPM, L-2 Long Key Nose, Removable Gap, Trav-A-Dial, 2" Hole, Inch & Metric Threading, Lead Screw Powered Cr...

450 Amp   ALMONT, MI   BUYER MUST HIRE RIGGER ...[more]

60" x 120" x 12" Thick, with (6) 12" x 12" x 20 High Pink Granite Stands   ALMONT, MI   BUYER MUST HIRE RIGGER ...[more]

20,000 LB Capacity, LP Fuel, 122" Lift, Side Shift, Hard Tires, 8 Cylinder Engine, 846 Hours on Meter.   ALMONT, MI ...[more]

3,000 LB Capacity, LP Fuel, 2-Stage Mast, Solid Tires, 5,135 Hours, SN-80883   ALMONT, MI ...[more]

5 HP Capacity, 2-Stage Horizontal Tank. ALMONT, MI   BUYER MUST HIRE RIGGER ...[more]

75 KVA, 22" Throat, With Bed & Ram, Welding Arms, Petron Weld Control.   ALMONT, MI   BUYER MUST HIRE RIGGER ...[more]

100 KVA, 28" Throat, With Bed & Ram, Welding Arms, Medar Weld Co   ALMONT, MI   BUYER MUST HIRE RIGGER   ...[more]

26" Wide x 60" OD x 10,000 LB, .154" Thick Capacity Serial # 63381-57   ALMONT, MI   BUYER MUST HIRE RIGGER ...[more]

12" Wide Capacity. ???   ALMONT, MI   BUYER MUST HIRE RIGGER   ...[more]

36" Wide x 12" Stroke Capacity, with Pull Through 3 Over 4 Rolls   ALMONT, MI   BUYER MUST HIRE RIGGER ...[more]

32" Wide x 18" Stroke Capacity.   ALMONT, MI   BUYER MUST HIRE RIGGER ...[more]

(2) Self Contained Nitro Units   ALMONT, MI   BUYER MUST HIRE RIGGER ...[more]

60 HP Capacity   ALMONT, MI   BUYER MUST HIRE RIGGER ...[more]

(3) 52" x 12.5" Wide Angle Plates   ALMONT, MI   BUYER MUST HIRE RIGGER ...[more]

40" x 10" Wide Angle Plate   ALMONT, MI   BUYER MUST HIRE RIGGER ...[more]

Pair of 30" x 8" Angle Plates.   ALMONT, MI   BUYER MUST HIRE RIGGER ...[more]

35 GPM at 3,000 PSI   PITTSBURGH, PA RIGGING PROVIDED FOR ADDITIONAL COST OF $50.00 - TO BE PAID ON DAY OF PICKUP   ...[more]

14 Gauge X 10’ Capacity without Heavy Angle Die, 10Gauge X 8’ with Heavy Angle Die, Two FrontsSupports, Manual Back Gage, Heavy Angle Dieincluded ...

Double Index Machine, 16” Rated Work Diameter,36.5” Hob Carriage Travel, 64” Spindle Face to Tail, 5”Hob Diameter, 49-246 Hob Speeds, 1500 RPM Wor...

4,000 LB Capacity With Built in Battery Charger   MT ULLA, NC ...[more]

S/N: 836-13, 10" x 20" capacity, Hydraulic Table, Plunge Cycle, Missing Tailstock   DRYDEN, MI ...[more]

S/N: 523-1224-400, 12" x 24" fine line chuck, Auto feeds, Auto Dresser, Spark Out Timer, 440V DRYDEN, MI ...[more]

S/N: 521-1-327, 10" x 24" capacity, variable speed headstock, variable speed table traverse, dwell left & right, 240V DRYDEN, MI ...[more]

S/N: 2U3E5D-7, Variable speed headstock, coolant base w/ pump, variable speed table traverse, tarry left & right, 440V DRYDEN, MI ...[more]

S/N: HP64631, Auto feeds, Dwell, Plunge Feed DRYDEN, MI ...[more]

S/N: 32202, not complete DRYDEN, MI ...[more]

Base,  Grinding Wheel Head with Spindle & Driver motor, Headstock (no motor), Tailstock, Lube System DRYDEN, MI ...[more]

Model 1212, 5" x 12" Capacity DRYDEN, MI ...[more]

5/8" Capacity, 3/4 HP DRYDEN, MI ...[more]

9" disc, 6" belt DRYDEN, MI ...[more]

Loading...Loading...
  • Lots per page
  • 60
  • 120
  • 240
Page of 3

Recently Viewed Lots