Monarch and Hardinge Engine Lathes, Bridgeport and Cincinnati Milling Machines, DoALL Saw, Drill Presses, Grinders, Welding, and More!
Houston, Texas
Timed auction

Auction dates

  • Ends from Dec 14, 2021 10am CT

Viewing dates

  • 9am - 3pm CT

Auction details

Currency: USD
Buyer's premium: 18.00%
Sales tax: 8.25%

Venue address

Lockwood Drive Houston, Texas 77082 United States

Auction house

Refine your search

Estimate

Filter by Price Range

Primary Category

Category

Brand

Item Type

State/Province

Town/City

You’re currently pending approval by the auctioneer. In the meantime you can continue to place bids from the lot page which will be accepted once you’re approved.
There are 60 item(s) within this sale
  • List
  • Grid
  • Lots per page
  • 60
  • 120
  • 240

Hammond No Dust Grinder, 1 hp motor (1750 rpm), 220V/3P/60Hz/3.2A, S/N 3777, (SDC Asset # 74484), (Surplus #19)

Dayton Model 4K783 Double End Pedestal Grinder / Polisher, 3/4 hp motor (1725 rpm), 115/230V/1P/60Hz/11/5.5A, S/N MM-600071-B MS, (Surplus #21)

Baldor 1/2 HP Double End Pedestal Grinder / Polisher, 7" max. wheel dia., 1/2 hp (3600 rpm), 5/8" shaft dia., 115V / 1P / 60Hz / 3.4A, on pedestal...

Delta Combination Disc / Belt Sander, Cat. #31-730, 12" disc, 6" x 48" belt, 1.5 hp motor, slotted table for disc and belt operations, S/N 91D2117...

Delta Model Y 1650 E Carbide Tool Grinder, 1/2 hp, 3450 rpm, forward/reverse rotation, 110V/60Hz/5.0A, Style RL925, S/N NA, (Surplus #23)

Dayton / Milwaukee Single End Grinder / Polisher, S/N NA, (Surplus #22)

Rush Model 252 Drill & Tool Grinder, new 1993, 3/32" - 2" dia. cap., 16" max. drill length, cap. from 1 to 10 flutes, self-centering 6-jaw chuck, ...

Keller Model 1A Die Filer, 1.5" stroke, 350 - 450 strokes per min., 1/8" to 1/2" x 5/8" chuck cap., 7.25" throat, 8.5" x 8.5" table, 1/4 hp motor,...

12" Delta Disc Sander, 12" dia. disc, slotted table, 3/4 hp motor (1725 rpm), 115/230V/1P/60Hz/9.6/4.8A, slotted table, table tilt, on stand, S/N ...

12.5" x 20" Monarch Model 10 EE Tool Room Lathe, new 1946, 12.5" swing over bed, 7.25" over cross slide, 20" ctrs, 50 - 2500 rpm, 3 hp, 1-13/32" s...

Tooling for Monarch Model EE Engine Lathe

10" x 20" Hardinge Model HLV-H Precision Lathe, 10" swing over bed, 9" over carriage, 6" over cross slide, 20" ctrs, 125 - 3000 rpm, 1.5 hp (460V/...

Tooling for Hardinge Model HLV-H Precision Lathe

14" x 54" Monarch Model 12" CK Engine Lathe, new 1947, 14.5" swing over bed, 54" ctrs, 16 spindle speeds, 24 - 1000 rpm, Acu-Rite DRO, 3-jaw chuck...

Tooling for 14" x 54" Monarch Model 12" CK Engine Lathe

15.5" x 54" Monarch Model 13" Engine Lathe, new 1957, 15.5" swing over bed, 54" ctrs, 16 spindle speeds, 28 - 1200 rpm, 4-jaw chuck, Acu-Rite DRO,...

Tooling for 15.5" x 54" Monarch Model 13" Engine Lathe

20" x 150" Monarch Model 13" Engine Lathe, new 1957, 20.5" swing over bed, 13" over carriage, 150" ctrs, 28 - 1200 rpm, 15 hp, Acu-Rite DRO, 3-jaw...

Tooling for 20" x 150" Monarch Model 13" Engine Lathe

Cincinnati Model Cinpak 45 205-12 Universal Milling Machine with Motorized Overarm, 12" x 54" table, hor. spindle, motorized overarm with articula...

Van Norman Model 36 Universal Milling Machine, 14" x 64" table, 36" table long. trvl, 13" cross trvl, 16" under spindle, 21" vert. trvl, #50 spind...

Bridgeport Series I Vertical Milling Machine, 3-axis Acu-Rite DRO, 5" spindle trvl, Bridgeport shaping attach., power feed in X, power up/down fee...

Tooling for Bridgeport Series I Vertical Milling Machine

Bridgeport Series I Vertical Milling Machine, 3-axis Acu-Rite DRO, 2 hp spindle motor, 5" spindle trvl, Bridgeport shaping attach. (S/N E8012), po...

Tooling for Bridgeport Series I Vertical Milling Machine

Grand Rapids / Gallmeyer & Livingston Model 570 Reciprocating Table Surface Grinder, new 1964, 16" x 36" table, magnetic chuck, 2100 rpm grinding ...

Mitsubishi Model EA8S Sinker Type EDM, FP80S CNC controls, 11.8" X trvl / 9.8" Y trvl / 9.8" Z trvl, 3.4" - 9.8" dielectric fluid level, 31.5" x 2...

DoALL Model 3613-1 Vertical Bandsaw, new 2003, 30" x 30" table, 55 - 5200 fpm blade speeds, 3 hp, 35.5" throat, 13" work ht., table tilt 45 deg. r...

DoALL Model C-916 Horizontal Bandsaw, 9" x 16" rect. cap. at 90 deg., 10.75"rnd cap. at 90 deg., 159" x 1" x 0.035" blade, 105 - 275 fpm blade spe...

DoALL Model DTR-28 Articulating Arm Radial Drill Press, 24" arm length, 6" to 22-13/16" spindle center to col., 6" power quill feed, 6" to 23-3/16...

Rockwell / Delta Model 15-655 Upright Drill Press, 14" x 11" table, 15" swing, 7.5" throat, 300 - 3100 rpm spindle speeds, 3/4 hp, #3 MT spindle t...

Rockwell / Delta Model 15-655 Upright Drill Press, 14" x 11" table, 15" swing, 7.5" throat, 300 - 3100 rpm spindle speeds, 3/4 hp, #3 MT spindle t...

Rockwell / Delta Model 15-655 Upright Drill Press, 14" x 11" table, 15" swing, 7.5" throat, 450 - 4700 rpm spindle speeds, 3/4 hp, #3 MT spindle t...

Fosdick 24" Upright Drill Press, 24" x 24" table, 6 spindle speeds, 15 - 900 rpm, 1 hp motor, 220/440V, S/N NA, (SDC Asset #74475), (Surplus #10)

Electro-Arc Model 2-DVQT Tap Disintegrator, 26" x 18" table (T-slots), "Q" disintegrator head, 480V/50/60Hz/13A/15KVA, oad (approx.): 31" x 48" x ...

Di-Acro Houdaille Model 36 Power Rolls, 20 ga. cap., 36" bending length, 1" min. radius, 2" dia. rolls, 1/3 hp motor, squaring arm, 115/230V / 1P ...

10' x 14 Ga. Chicago Dreis & Krump Model SO-1014 Box and Pan Brake, 10' bending length, 14 ga. max. thickness, support table at rear, S/N 323476-M...

Chicago Dreis & Krump Model BPO-412-6 Leaf and Finger Brake, 12 ga. cap., 4' max. bending length, oad (approx.): 90" x 53" x 63" high, wt. (approx...

Rotex Model 18A SYN Hand Actuated C-Frame Turret Punch, 8 ton cap., 18" throat, 18 tool stations, 1/8" to 2-1/4" punch cap., hand actuated, oad (a...

75 Ton Mubea Model HPSN 750 Hydraulic Ironworker, 75 ton cap., flat bar at 90°: 19.75" x 1/2", 12" x 3/4"; flat bar at 45°: 6" x 6" x 1/2"; angle ...

Lincoln Power MIG 300 Welding Power Source, on rolling cart, K No.: K1694-1 Code: 10562, S/N U1020452608, (Surplus #38)

Miller Syncrowave 250 Welding Power Source, constant current AC/DC, 200/230/460 volts, 105.8/92/46 amps, 11.4 kW, single phase, 60Hz, on rolling s...

Miller Syncrowave 250 Welding Power Source, constant current AC/DC, 200/230/460 volts, 105.8/92/46 amps, 11.4 kW, single phase, 60Hz, on stand, S/...

Miller Syncrowave 250 Welding Power Source, constant current AC/DC, 200/230/460 volts, 105.8/92/46 amps, 11.4 kW, single phase, 60Hz, on stand, S/...

Miller Millermatic 135 Welding Power Source, 115 VAC, 30 - 135 amp range, 28 volts max. open-circuit DC, 90A at 18V DC (20% duty cycle), 63A at 21...

Thermal ARC Pak 5XR Plasma Cutting System, 460V/3P/60Hz/20A, 55 amps at 100 volts, 385 volts at 60% duty cycle, S/N A80337A1832038, (Surplus #41)

100 Lb. Ransome Model B1 Type A Bench Top Welding Positioner, new 1987, 100 lbs. max. cap. at 1" gravity center and 0" eccentricity, 25 in.-lbs. r...

100 Lb. Ransome Model B1 Bench Top Welding Positioner, 100 lbs. max. cap., 0 - 6 rpm table speed, tilt/rotate table, 110V/1P/60Hz, S/N P544, (SDC ...

Reed Model 3C Heavy Duty Vise, 8" jaw opening, 5" jaw width, swivel base, (Surplus # Not on Vise)

Craftsman Heavy Duty Vise, 6" jaw opening, 4" jaw width, swivel base, S/N 51858, (Surplus # Not on Vise)

No. 4CA Large Vise on Short Stand, (Surplus #39)

5' x 5' Acorn Welding Table with Reed No. 20 Vise, (Surplus # Not on Table)

5' x 5' Acorn Welding Table with Reed Vise, (Surplus #50)

5' x 10' Acorn Welding Table with Vise, (Surplus #40)

Lot 157

Aluminum Table

Aluminum Table, (Surplus #35)

5' x 12' Steel Frame Table, wood top with partial steel plate cover, contents on or under NOT included, (Photo 8317)

5' x 12' Steel Frame Table, wood top with partial steel plate cover, contents on or under NOT included, (Photo 8318)

5' x 12' Steel Frame Table, wood top with partial steel plate cover, contents on or under NOT included, (Photo 8319)

Loading...Loading...
  • Lots per page
  • 60
  • 120
  • 240

Recently Viewed Lots