Dayco Spin Machine w/ Gear Reduction Motor Drive, & Material Rack ...[more]

Dayco Second Part Builder, 6' Wide w/ Controls   ...[more]

Dayton Skive Saw Machine ...[more]

Rubber Cog Press Machine, Heavy Cast Iron Constr., w/ Hyd Unit and Controls ...[more]

8 - Plattens for Cog Press w/ Stand You are getting the Stand they are sitting on as well. There are 3 units near the other lot that will be going...

12 - Plattens for Cog Press w/ Rack There are a total of 12 Plattens in this Lot. w/ Steel Rack Approx weight per: Platten is 400 Lbs.   ...[more]

90" Lifting Beam w/ Chains on each end for picking Plattens for COG Press   ...[more]

Industrial Metal Products Vulcanizer / Autoclave Unit  650 Degree ...[more]

Vulcanizer / Autoclave Unit ...[more]

Vulcanizer / Autoclave Unit ...[more]

40" Swing x 48" CC's Dayco Cog Build Station w/ Steel Back Stand ...[more]

18" swing x 12" CC's Dayco Spin Machine 3 HP Drive Motor Unit runs in Water Spring Loaded Release and Load lever on Left of Machine ...[more]

3 HP Dayco Spin Machine, 12" CC's, Runs in Water Spring Loaded Release and Load on Left Side of Machine Front Cover Cast Iron Base   ...[more]

Dayco BIG Build Machine w/ Rack ...[more]

Dayco Small Wrapper / Builder Machine w/ Steel Rack ...[more]

60" Dia x 93" OAH Vulcanizer / Autoclave Unit ...[more]

70" Dia x 108" OAH Vulcanizer / Autoclave Unit ...[more]

Dayco 3 HP Spinning Lathe, For Flooding Parts in Coolant while running 3 HP Severe Duty Motor Start / Stop Push Buttons w/ Foot Control ...[more]

Farrel 2-Roll Cracker Mill   Herringbone Gear Unit Model# DR50A Ratio 28.9347 / 1 Serial# TD6614 RPM: 585 to 20.2   Main Motor 200HP 440VAC  Driv...

Farrel - Birmingham 2-Roll Cracker Mill, w/Alten Gear Driver, 200HP, Updated Electrics 26" Dia x 39" Wide Rolls   Alten Gear Driver Unit Model# TG...

8.0 NRM Rubber Extruder, 400 HP, 9:1, Date: 12-00 8.0 NRM Rubber Extruder Date: 12-00 Machine: 8.0  9:1 Serial# T21480   Lufkin Gear Drive Unit Mo...

14-1/4" Wide Hytrol Flat Belt Conveyor, 3 Sections, from Cracker Mill to Main Conveyor to Calender  Consists of the following: 1 - Section 14-1/4"...

16" Flat Belt x 27' Long Conveyor, From Extruder / Cracker Mill to Calender  ...[more]

Flat Belt Conveyor Feeding Calendar Machine ...[more]

Stewart Bolling Rubber Calender Production Line   Serial# 13092   28" Dia. x 72" Long Rolls   Equipped with: Horsborough & Scott Mark II Helical S...

Budzar Temperature Unit, Mod# 2JT-36150-CHV, USED WITH CALENDER ...[more]

Roller Station, 2 - 4-1/4" x 68" Rollers and 1 - 2" x 72-1/2" Roller, Manual ...[more]

4 Roller Cooling Roll Unit after Calender w/ 4 Thermal Care Cooling Units  Mod# RQ0910 W/ Infeed rolls Main Roll Size: 24" Dia x 68" Long w/ Hydra...

8 Roller Unit w/ Fine wire brush wheel and gripper roll after Calender Machine 14' 7" OAH ...[more]

69" x 12' Flat Belt Rubber Winding Machine, w/ Hyd Unit and Gear Drive, at end of Calender Line ...[more]

Misc Rolls and Bars for Calender Line w/ Steel Roll-a-Round Cart ...[more]

46" Dia. x 73" OAH Vulcanizer / Autoclave Unit w/ Updated A/B Controls in 6/2017 Actual S/N of Unit 26440 150 psi @ 650 degree   ...[more]

36" Dia x 70" OAH Vulcanizer, Repaired by: Lanford Ind. 2010, Updated A/B Controls 2017 ...[more]

46" Dia x 77" OAH Vulcanizer w/ Updated A/B Controls in 2017 ...[more]

52" Dia. Springfield Tool & Die Autoclave / Vulcanizer w/ Updated A/B Controls in 9/2017 ...[more]

64" x 110" x 48" H Wash Tank w/ Pump & Filter, Sits on floor ...[more]

Rubber Stripper Press w/ 40 HP Hydraulic Unit and Allen Bradley Controls 12" Stroke of Shoes In / Out 56" Height of Shoes 89" x 78" Main Base Area...

30" Patterson Industrial Fan ...[more]

Cooper Intl Rubber / Fabric Slitter - Stitcher Machine, 48" Wide Table  48" Wide Table Air Clamping on Both Sides 2 Gear Drives (One on each end) ...

54" x 110" x 48" Wash Tank w/ Pump & Filter Unit, Fllor Standing ...[more]

Pneumatic Swing Arm Press, 41-1/4" Dia, 14' 5" OAH, w/ Valves & Cylinders 41-1/4" Dia. Alum Plate 4' x 97-1/2" x 1" Base Steel Plate approx 48" St...

Builder Complete System #2, 52" Wide Rollers, 2 Sets of Stairs, A/B Controls, Spinner Machine  ...[more]

36" x 72" OAH Vulcanizer / Autoclave Updated A/B Electrics 2017 Repaired in 2010 by Lanford Industrial ...[more]

42" Dia x 74" Springfield Tool Vulcanizer / Autoclave w/ Updated A/B Controls 2017  S/n 59 650 degree F @ 250 psi Repaired by: Lanford Industrial ...

42" Dia x 74" Springfield Autoclave / Vulcanizer w/ A/B Updated Controls 2017 650 degree F @ 250 psi Serial# 57   ...[more]

42" x 74" Springfield Tool Vulcanizer / Autoclave w/ Updated A/B Controls in 2017, Repaired in 2010 ...[more]

Pneumatic Swing Arm Press, 33" Dia, 12' 2" OAH, w/ Valves & Cylinders 33" Dia. Alum Plate 4' x 97-1/2" x 1" Base Steel Plate approx 48" Stroke .....

Binks Pot (approx 5 Gal) ...[more]

Builder Complete 64" Wide Rollers w/ Controls Spinning Unit ...[more]

Builder Complete #52, W/ 65" Wide Rollers, Controls and Spinner Machine   ...[more]

6 Arm Rubber Stripping Machine, 30 HP Hydraulic Unit and Controls 30 HP Self Contained Hyd Unit w/ Heat Exchanger 6 Arms Electric Controls 58" Arm...

Builder Complete #51, W/ 65" Wide Rollers, Controls and Spinner Machine ...[more]

46" x 92" OAH Vulcanizer / Autoclave w/ Controls, 650 degree @ 150 PSI, Altered 1998 Pot# 564 ...[more]

46" Dia x 92" OAH Vulcanizer / Autoclave Unit w/ Control Pot# 563 ...[more]

46" Dia x 92" OAH Rogers Vulcanizer / Autoclave w/ Control, Pot# 562 ...[more]

46" Dia x 94" Rogers Autoclave / Vulcanizer, w/ Controls, Pot# 561  ...[more]

50" Dia x 92" Autoclave / Vulcanizer, Pot# 560, NO CONTROLS  ...[more]

50" dia x 93" H Rogers Autoclave / Vulcanizer Pot, Pot# 559, NO CONTROLS  ...[more]

W S E 50" Dia x 96" H Autoclave / Vulcanizer Unit, NO CONTROLS Max W.P. 150 PSI @ 660 degree F Mfg'd: 1993 Serial# 16402 Pot# 558 ...[more]

W S E 50" Dia x 96" H Autoclave / Vulcanizer Unit, NO CONTROLS Max W.P. 150 PSI @ 660 degree F Mfg'd: 1993 Pot# 557 ...[more]