Ingersoll-Rand Air Dryer, Model TS3A, Serial# DB000000817-020705. Air cooled, R404A Refrigerant, 150 psi, 3/60/460 volt, built 2005. AEC#50518028....

Pillar Technologies Corona Treater. AEC#50518132. RIGGING AND LOADING FEE: $50.00

Appleton 8" Core Cutter, Model S200, Serial# 102992. 440 Volt, 3 Phase, 60 HZ. Foot pedal controller. AEC#50518032. RIGGING AND LOADING FEE: $25...

Fairbanks 48" x 48" Platform Floor Scale, Model 3500-211, Serial# 113630020001. 5000 Pound capacity. No readout. AEC#50518027. RIGGING AND LOADIN...

Fairbanks 36" x 36" Platform Floor Scale With Ramp, Model PLFHR34XX, Serial# M3000372. 2500 Pound capacity, BTEK readout. AEC#50518133. RIGGING...

Crane System Consisting Of: (4) Post frame, (1) picking cradle, (1) 3 ton cross beam, (2) 1 ton Coffing hoists. Approximate footprint 328" long x ...

CM Lodestar 2 Ton Hoist, no controller. AEC#50518135. RIGGING AND LOADING FEE: $100.00

CM Lodestar 1/2 Ton Hoist. With controller and picking cradle. AEC#50518136. RIGGING AND LOADING FEE: $100.00

CM Lodestar 1/2 Ton Hoist. With controller and picking cradle. AEC#50518137. RIGGING AND LOADING FEE: $100.00

CM Lodestar 1 Ton Hoist. With controller and picking cradle. AEC#50518138. RIGGING AND LOADING FEE: $100.00

CM Lodestar 2 Ton Hoist. With controller and picking cradle. AEC#50518139. RIGGING AND LOADING FEE: $100.00

Crane System Consisting Of: (5) Post frame, (1) cross beam, (1) 2 ton chain fall. Approximate footprint 41' long x 290" wide x 148" tall. AEC#50...

CM Lodestar 1/2 Ton Hoist. With controller. AEC#50518141. RIGGING AND LOADING FEE: $100.00

BULK BID OF COMPLETE LINE (LOTS 236-239): Complete Sheet Line Consisting Of Lots 236 thru 239. Shanghai Jobbetter Plastic Machinery Sheet Line, 4...

SUBJECT TO BULK OFFER ON LOT # 235: Shanghai Jobbetter Plastic Machinery 4.5" Single Screw Extruder. Model JDJ-120, Serial# JBD-09035, built 2009...

SUBJECT TO BULK OFFER ON LOT # 235: EDI UH100 Sheet die, Approximate 42" wide, Serial# 05-2515. AEC#50518144. RIGGING AND LOADING FEE: $800.00

SUBJECT TO BULK OFFER ON LOT # 235: Shanghai Jobbetter Plastic Machinery 3 Roll Sheet Stack, Model JJXY450 Serial# jJBD-10025-3. Chrome rollos ap...

SUBJECT TO BULK OFFER ON LOT # 235: Shanghai Jobbetter Plastic Machinery 2 position Turret Winder, Model JSJ1000, Serial# JBD-10025-3. AEC#50518...

Fully Refurbished 41" EDI Ultraflex R75 Sheet Die Center Back Slot Feed, SN 76-2385-2-E. AEC#50518173. RIGGING AND LOADING FEE: $50.00

Cumberland Granulator, Model 284, 3 Knife, 3/60/460 volt. 21amps, Serial# 325525-86013. Includes a blower. AEC#50518083. RIGGING AND LOADING FEE:...

Novatec Natural Gas fired Dryer/Crystallizers, Model GFH-2500, S/N 9258-0166, 460 Volt, 3 Phase, 60 Hz. 5.3 KVA, 6.6 Amps, 3.4 HP, Year 2009, Incl...

Una-Dyn Desiccant Dryer, Model DHD15, SO# 14157A, 3/60/460 volt, 66.43 amps, with a custom built drying hopper. No after cooler included, Serial#...

BULK BID OF COMPLETE LINE (LOTS 246-249): Shanghai Jobbetter Plastic Machinery Sheet Line. Consisting of 4.5" single screw extruder, Model JDJ-12...

SUBJECT TO BULK OFFER ON LOT # 245: Shanghai Jobbetter Plastic Machinery Sheet Line. Consisting of 4.5" single screw extruder, Model JDJ-120, 132...

SUBJECT TO BULK OFFER ON LOT # 245: Jinscheng Approximate 35" wide sheet die. AEC#50518148. RIGGING AND LOADING FEE: $1,200.00

SUBJECT TO BULK OFFER ON LOT # 245: Shanghai Jobbetter Approximate 18" diameter x 39.5" 45 degrees 3 roll sheet stack, chrome rolls. Laminating s...

SUBJECT TO BULK OFFER ON LOT # 245: Shanghai Jobbetter (2) Position turret winder model JSJ 800, serial# JBD-09035, size 800 X 1000, built 2009. ...

LOCATED HAINESPORT, NJ - Battenfeld Gloucester 36" Wide Inclined Sheet Line. Consisting of: (1) Battenfeld Gloucester 3-1/2" single screw extruder...

LOCATED HAINESPORT, NJ - OMV 4.5" Single Screw Extruder. Approximately 36 to 1 L/D. Electrically heated, water cooled 8 zone barrel. Water cooled ...

LOCATED MEMPHIS,TN - Welex 3.5" Single Screw Extruder, Model 3.5, 30;1 L/D Year 1989, 250 HP SSD Drive Motor, 1175 RPM, 480 Volt, 3 Phase, 60 Hz.,...

LOCATED MEMPHIS,TN - Welex 3 Roll Sheet Stack, Model 18x18x18x72, (3) 18" x 72", 5HP Individually Driven Chrome Rolls, Year 2000, includes Control...

LOCATED MEMPHIS,TN - HPM 4.5" Single Screw Extruder, Model 4.5-TM-III-30:1, 30:1 L/D, 5 Zones Electrically Heated, Water Cooled, Vented Barrel, Ba...

Granutec Granulator, model TFG121210, 3 Knife, Serial# 196-2697. Includes a Rapid cyclone with tote collection housing and a sock filter. AEC#5051...

Unwind Slitter Station. Unwinder adjustable to 120" Wide, Slitter to 84" Wide. AEC#50518087. RIGGING AND LOADING FEE: $2,400

Lot Of (2) Unwind portable roll stand carts. AEC#50518151. RIGGING AND LOADING FEE: $75.00

Lot Of (2) Core holding carts and roll hook. AEC#50518152. RIGGING AND LOADING FEE: $50.00

Lot Of (1) Roll cart, (1) roll stand. AEC#50518153. RIGGING AND LOADING FEE: $30.00

Lamniform Laminating Station, with 24" wide laminating surface, Model THERMOLAM 1, 3/40/240 volt. Serial# 0002, built 1998. AEC#50518054. RIGGING...

HMAP Laminating Station, Model LAM-42, with 45" wide laminating surface. includes (2) 1.5kw pillar treators, CTC Parker touch screen controller. 3...

Lot of (1) Tensil tester and (1) bench scale. AEC#50518154. RIGGING AND LOADING FEE: $25.00

ATS Farr Lab Punch Press. AEC#50518078. RIGGING AND LOADING FEE: $25.00

Custom Hydraulic Press, 12" X 10". With table. AEC#50518077. RIGGING AND LOADING FEE: $50.00

Heartland Sheet Thermoformer with Vacuum Pump. sheet 18" x 24". With control panel. AEC#50518076. RIGGING AND LOADING FEE: $250.00

Conair Jetro Hydraulic Pellitizer parts machine, Model 206, Serial# 8-060580. With panel, reservoir tank and stand. AEC#50518067. RIGGING AND LOA...

Conair Jetro hydraulic Pelletizer, Model 206, Serial# 8-062379. With control panel. AEC#50518155. RIGGING AND LOADING FEE: $150.00

Water Bath, Stainless Steeel. Approximate 15-3/4" wide x 15' long x 9-3/4" deep. With pump, and heat exchanger. Includes a Berlyn model HV-1 air k...

Sterling 3.5" Single Screw Extruder, 24:1 L/D, 100 hp Motor, gearbox ratio 13.9:1. Serial# 7121771. (4) Zones electrically heated, water cooled. R...

Goulding 3 Roll Sheet Stack. Appproximate 24" wide x 12" diameter chrome rolls, 9" long cooling conveyor, rubber pull roll stand. AEC#50518157. ...

MPM Single Station Cantilevered Approximate 14" Wide Winder with Pull Rolls. AEC#50518070. RIGGING AND LOADING FEE: $150.00

Nanjing Twin Screw Underwater Pelletizing Line. (1) 51.4mm Co-Rotating Extruder, Model SHJ-50B, 44:1 L/D, 600 RPM, output 70-150 Kg/Hour, 55kW Sie...

Cumberland Granulator, Model 184, Serial# 325525-89705. 3 Knife. Includes 3hp blower, and a Reliance drive. AEC#50518026. RIGGING AND LOADING FEE...

(4) Sock Dust Collector With Cyclone. AEC#50518036. RIGGING AND LOADING FEE: $800.00

(4) Sock Dust Collector With Cyclone. AEC#50518037. RIGGING AND LOADING FEE: $800.00

(3) Sock Dust Collector With Cyclone. AEC#50518038. RIGGING AND LOADING FEE: $800.00

(4) Sock Dust Collector With Cyclone. AEC#50518039. RIGGING AND LOADING FEE: $800.00

(8) Sock Dust Collector With Cyclone. AEC#50518035. RIGGING AND LOADING FEE: $800.00

Novatec Dryer, Model MPC-500. Siemens simatic touch screen control panel. 3/60/460 volt, 54.6 amps. Serial# 3-9312-1269. Includes a dry hopper. A...

Una-Dyn Desiccant Dryer, Model DHD. With a drying hopper. AEC#50518050. RIGGING AND LOADING FEE: $1,950.00

Novatec Dryer, Model CDM-2500, Siemens Simatic touchscreen controller, 3/60/460 volt, 133 amps, Serial# 12-080-0098. Includes Cincinnati Milacron ...

Rapid Granulator, Model R-36. Approximately 40hp motor. Pull rolls, with sound enclosure, and blower. Serial# 430-66475, built 2005. AEC#50518023....